raknal

sorry duplicate post

Flying EDDL - EPWA. very very slow climb out to initial 10,000 then even slower up to FL390 as directed by atc. at FL350 was directed to FL390, once started the very slow climb the aircraft started to oscillate wildly. hade to use VS to overcome the slow climb plus descended to FL350 but still wild oscillation Never had these problems prior to the patch yesterday

Flying EDDL - EPWA. very very slow climb out to initial 10,000 then even slower up to FL390 as directed by atc. at FL350 was directed to FL390, once started the very slow climb the aircraft started to oscillate wildly. hade to use VS to overcome the slow climb plus descended to FL350 but still wild oscillation Never had these problems prior to the patch yesterday

Flying EDDL - EPWA. very very slow climb out to initial 10,000 then even slower up to FL390 as directed by atc. at FL350 was directed to FL390, once started the very slow climb the aircraft started to oscillate wildly. hade to use VS to overcome the slow climb plus descended to FL350 but still wild oscillation Never had these problems prior to the patch yesterday

I am unable to find a solution to the following, maybe there isn't one, but the issue is When saving a flight and returning to the flight after restarting the sim, the weather defaults back to not live. Is there any work around for this? Raknal

Having the same problem with this : File fs-base-cgl-0.1.30.fspatch.001 takes forever and has started redownloading a couple of dozen times right now Any ideas how to get the D/L to finish, or is it worthwhile to just uninstall the sim and start6 with a fresh download

After resuming a saved flight, Live weather no longer available , is there a work around to edit a saved flight so to enable live weather again?

Thanks for that info. However I use simbrief or PFPS to build my plans and just trying to figure out how to input a simbrief plan into FS2020 if I dont want to use the built in planner

No vastly different, unsure how to change them, however still after help with flight planning

Any assistance on creating, inputting and flying a flight plan or even editing a FS plan would be appreciated. Also flew the A320 today, all good with ATC till half way through, no further atc instructions received and aircraft did not commence descent as per F/P, any thoughts? Thanks Raknal

I have 2 HDD - one is 512GB with only 140 GB left, has P3D on it now The other is a 2TB NAS drive. I dont know what NAS means, but would i be able to install flight simulator on the NAS drive? as it has 1.7TB free All other specs are between recommended and Ideal Thanks Raknal

Yes the problem happens with all aircraft

Also getting the same fail message on all aircraft with the GTN 750 installed

Started to get the message 3 days ago and the message keeps occurring each time I load either a saved flight or commence a new flight

Getting a GPWS Fail message, unable to locate in manual how to fix it any help appreciated Flying A2A Comanche with GTN 750 Raknal

I have not tried that, will do and advise

I fly the A2A PA-24 250 comanche regularly with the GTN 750 installed and working ok. However in recent times when I resume a saved flight (usually 24 hours after saving) the GTN does not open, latest GTN updates have been installed. To clarify when loading the Comanche for a new flight the GTN loads normally Any assistance appreciated Richard

Thanks Bill Rewrote the cfg file from yours above ,quite few amendments required, all good now Thanks Richard

Recently did the upgrade for A2a Comanche. GTN 750 was replaced by default gauges after upgrade. Managed to get the GTN back in the cockpit by using the A2A configuratot and the RXP app in the add on menu problem is now I am unable to have the GTN power on, just have a black screen Any help very welcome Thanks in advance

I am unable to have the Comanche autopilot connect to the GTN GPS. The plane drifts off and and wont change direction at Flight plan way points. I have the Comanche autopilot HDG connected and GPS in the GTN. Only a newbie with the GTN750 and any help appreciated Richard

Thanks Frank, very helpful and much appreciated Richard

Using no bezel. When right clicking I get the various view menus wherever I click on the GTN. However I have re installed the panel configuration mod from Bills511 and now I am able to get a pop up when I left click the edge of the GTN. I can then ( on the pop up) get the configuration screen. I am still unable to have the home or DTO buttons work on either screen (pop up or original) but not a big deal One other question is with the update 2.5 11 . When extracted do I run the complete installer again and assume it overwrites the original in my system? TIA Richard

I am unable to open the configuration panel for the GTN 750 by Shift right click the top edge. I am also unable to use dct to and home buttons any assistance greatly appreciated Richard

Great that fixed it, came on as soon as i powered up the aircraft. Next question: right clicking in the GTN screen does NOT bring up the popup screen, any thoughts on this Cheers Richard

The panel cfg file on my computer is C/users/Richard/Prepar3Dv4Add-0ns/A2A/SimObjects/Airplanes/A2A_PA24_250_Comanche/panel [VCockpit03] size_mm=1024,1024 pixel_size=1024,1024 texture=$GTN750 background_color=0,0,0 gauge00=F1GTN!GTN750VC, 0,0,677,794,UNIT1 Thanks for your assistance Richaes