rsperge

the plane flies but when you look outside left and right propellors not moving.

this is unbelievable this plane, interior, props are not moving from either way, looking out from cockpit, and looking from the outside or spot view.

finally got it going almost. It flies I have the cockpit but the propellers are not moving.maybe I am missing a file

I have all of the categories, aircraft cfg, model, panel.cfg, sound.cfg, soundai.cfg. ,texture file, texture.Paratrooper, texture.Eats_315221, and model. I also have in the fsx menue to show all aircraft, and I have the plane listed in fsx as simobjects/ airplanes as Douglas_C-47V_3.12_Beta. What else could I be doing wrong. How about this I have the title model, and inside that folder, Listed in that folder I have,the model.cfg, C-47R_interior.MDL, and finally C47V3_1.MDL Should that folder be called C47V3_1.MDL, instead of model

just cant get this in. hae all the titles aircraft cfg model panel, sound soundai air file and still no luck. Have it called in my FSX Douglas_C-47_V3.12_Beta I have the second version and no problem. What am I doing wrong ?

For some reason I am having problems installing I believe this is how you title it Douglas_C47_V3.12.beta. I have the Douglas_C-47_V2 whch is the older addition. Can someone please help me out on this and be as specific as possible on how you downloaded this product, which is a great piece of freeware. I know you are supposed to have the titles, sound, soundai, aircraft cfg, model, textures, panel,, and their is also a new and updated vc. For some reason Ican't install it is not on the FSX menue with all the other planes. What am I doing wrong here ? I have Windows 7 780 gtx 3770k FSX Gold Edition

crystal clear.

beautiful shots

Thanks everybody back in biz. I read the manual the introduction part on page 15, and in my case al I had to do was add and remove first the 300 then the 200. Also In my case I did not have to go to the fmc and cancel my registration.since it was on the same computer. thanks once again, Ronny Spergel, One other thing, all my planes are still there in the PMDG Operation Center as well and in FSX.

when you uninstall via control panel/programs 200 and 300 should you reboot anytime ? Secondly do you have to be concerned about deleting or saving panels ? thanks so much Ronny Spergel

I currenty own the PMDG 777-200 and 300 unfortunately they have black panels, PMDG 600,700,800,900,ngx are all working fine. For the PMDG Operation Center I have version 1.16.01, loads up fine and I see all of my planes including the PMDG 777-200 and 300. How do I correct this problems with the black panels on the PMDG 777 line. The planes also shows up the in the FSX menue, own FSX Gold Edition. When I select the T7 black panels show up. Everything else is fine the plane is loaded up and you see it on the runway or at the terminal. and goes up in the air. Thus what should I do ? I bought the T7 when they came out. On other thing I downloaded the new installers for both T7's just recently as well, and still did not fix the problem thanks, Ronny Spergel

as always thanks for the notice.

fantastic

Well now FSX Acceleration I get it up for a couple of minutes and then it crashes, closes down Error message from the event viewer says the following: aulty application path G:\FSX\fsx.exe and faulty module path unknown. When it loaded up after the repair I did say trusted fs Dreamteam plus I have the newest addon manager. So what does this sound like ?

Well I get FSX Acceleration for a few minutes and then closes down, I did a repair a couple of hours ago, now the message in the Event viewer says, Faulty application path G:\FSX\fsx.exe, and faulty module path unknown. For FS dreamteam when I loaded it up I mentioned trusted module, FYI. So we are making a bit of progress. What does this sound like? thanks once again Ronny Well I got FSX Aceleration up for a few minutes and then shuts down. I did a repair a couple of hours ago, now the message in the Event Viewer says, Faulty application path G:\FSX\fsx.exe and faulty module unknown. For FS Dreamteam when I loaded it up I mentioned trusted module. FYI So we are making a bit of progress. What does this sound like? thanks Ronny

DaveCT2003 come to the conclusion since I have the dvd's for FSX gold edition with acceleration will do a complete uninstall and reinstall. Its going to be a lot of work have about 180 gb at least of fsx. Once again I just want to thank everybody for trying to help me out. thanks, Ronny

well guys it looks like in the next few days, I will do and uninstall and reinstall. By the way AceHigh it did not work with the new icon. Just want to thanks all of you guys triying to help me out. I am going to wait a few days for my computer guy from home to check it out as well. When you do an uninstall of course I will go to the control panel and do the add and remove. All my programs and airports from fs dreamteam do I have to uninstall them as well ? Also have GEX, REX, etc etc all have to be uninstalled as well ? Since I have fsx with acceleration where in the registry do I look to delete remants of FSX ? I know Nick read his Bible again, and Steve thanks for giving me all of the idease, and everybody else as well.. Th is going to be tough. thanks Ronny

Well I am back again, and still no luck, the link Angel showed about the Airbus on the 2nd page just about says the same problem that I have faulty module G\FSXui.dll, faulty path G\FSX\fsx.exe, tried to reinstall the Airbus318-319 by Aerosoft but no luck Jim tried a lot of the things you mentioned still no luck.. AceHigh used CC Cleaner, defragged, ran by anti virus, what else ? This is plain frustrating. How do you do a repain ? Once again have FSX Gold Edition with Acceleration. I am later going to uninstall the new version of FS dreamteam addon manager 3.0.0.14 and reinstall it. but that one link on the second page by Angel showed the same errors in the event viewer as my computer but still had no luck. followed everything to the T. thanks,Ronny

anymore suggestions would appreciate, you guys have been great, but this this is so frustrating!!! thanks, Ronny

still having problems with fsx, installed the newest fs dreamteam addon manager version 3.0.0.14. rebooted still no luck. Also tried the FSX logbook recovery and saw all of my flights, followed all instructions still no luck. AceHigh I have had the fs dreamteam airports along with the addon manager for quite a while and have many of their airports, when this happened a couple of days ago I added a couple of planes from the Avsim library, but deleted any new addons. I also did the other things that you mentioned about the logbook .bin and renaming. Still getting the same eroors in the event viewer faulty application path G:\FSX\fsx.exe and faulty module path G\FSX\ui.dll. and AceHigh I used the one you sent me. really thought it would work. I have FSX Gold Edition with Acceleration. this is unbelievable, any more suggestions please with windows 7.

going to take a rest for now watch playoffs nba but AceHigh definitely send it to me and please give me instructions, my e-mail is in my profile. Jim as far as FSDT I have the newest addonManager version 3.0.0.14, tomorrow I will uninstall, reboot, and install again, I have quite of few of their airports. I did install it before the crash, so you never know that was on 6/17. Jim I will also check out about the fsx logbook recovery. Once again I thanks you guys so much. Ronny

Well I did find the Logbook.BIN I renamed it rebooted computer, no luck, then I took it out, rebooted computer again, still no luck, then I opened it up and it said the following this file does not have a program associated with it for performing this action. Please install a program, or if one is already installed create an association, in the default programs control panel. I have all my flights from 2012, to 6-16-2016, and this all strted the problem the next day. I also defragged drive, ran my anti virus, used CC Cleaner, running out of options. More suggestions please. I have had problems before but always fixed them, oh yeah got the new fs dreamteam addon manager. need help, really appreciate everybody trying to help me!!!

Jim I took out the dll.xml module put it in temporary folder still no luck. Ace High have windows 7 and could not find the file logbook. bin file went to documents folder/FSX/ all my flights but saw no file called logbook.bin file. also took out UIAutomation Core version 6 0 5840 16386 and still no luck. but where could not find file named logbook.bin, just named fsx and saw all my flights. need HELP please. I luv this sim, and really frustrated.

have version 6 0 5840 16386 been using this for at least 3 years, the problem in the event viewer says faulty module G:\FSX\ui.dll and faulty application path G:\FSX\fsx.exe, Tried system restore, deleted my cfg file took out scenery cfg file, put the exe.xml and dll.xml into temporary folders, deleted a couple of addons that I added yesterday on 6/17, talking about plains from avsim library, and still no luck. for year I have been flying never had a problem like this, any other suggestions. I really don't want to uninstall have too many addon progams like rex gex etc etc.

really need help getting faulty module, in event viewer G:\FSX\ui.dll also looked at avsim CTD Guide for FSX tried many thing and still getting the problem, need help please!!!