JMsooStyle

I've searched online but it seem that FSPS haven't released the version for P3D anyone have more infos? anyone tried the software with P3D?? thanks for your replies Jivan

So do you think is the wind injection that is causing it, in my case it's like the entire atmosphere around my aircraft vanish! The plane read 0 knots and fall from the sky until I adjust it manually on the map menu. I'm running a test flight loggin all the datas using FSUIPC and send it to REX support forum, but so far the error did not accrued yet...

This is the explanation I gave to myself so so far, at the moment I'm busy with work and I'm unable to make test flight. Also changing the speed and altitude on the flight sim map menu does solve the problem momentary until it appen again. Waiting for my days off for run further test...

Yeah im in contact with them but as you say I will have to replicate the flight with FSUIPC to record a log and send it to them

The N1 change after this issue started few second after takeoff, whatever issue happen it does mess up pretty bad the NGX function Anyone ever experience this flying without using the FMC? Also I know that the NGX is sensitive to the weather injection for example flying with Vatsim online using FSInn the plane could not reach cruise altitude due to some errors related to the injection and I remember that I used to fly cavok! I don't think corrupt installation because all started with Rex essential literally one of my first flight with, also I did reinstall the plane

Any speed anomalies? Alt disagree? And also wrong altimeter reading? I think the first time it happened the plane started to roll on the side impossible to manovre also I had sound warning switching from stall and over speed really confusing! I believe that the weather injection sometime might mess the plane instruments as to me it was showing altitude of 50000ft sometime, incredible v/s, and Bari settings completely unrealistic. Rex support told me that during beta testing nothing like that ever happened however they are investigating we should provide as much information possible.

The same it all started since I used REX Essential, first of all I had altimeter disagree something that could not be solved with normal solution like change the sim to US metric, second it started to give me false reading and lately literally induce my plane to fall from the sky as the speed in second went down to 0! I opened a topic on Rex Forum title NGX alt disagree problem. Hope they will help us

The second time it happen seconds after takeoff, at 400ft 160knots increasing, temperature in EGLL were around 18degrees Celsius. False reading should just mislead you but is impossible that from full takeoff speed the plane loose speed stopping completely and falling vertically from the sky. The speed was 0 on the world map as well. I will give a read to the topic you proposed me thanks guys

I reinstalled the NGX and made a new flight and it happen again I mange to take more screenshot Right after take off around 400ft gaining speed 160+ all normal when stridently out from nothing stall warning both captain and f/o PFD showing 30000ft instantly and speed zero together with the stand by instruments, FMC showing Buffet Alert It is impossible that in 1 second the NGX from 160knots increasing can jump to 0 and of course the plan start to fall from the sky like it actually stopped I took a screen from outside instant before crash as the plane was falling but from 400/500ft no higher as I was airborne since few sec Than I manage to open the world map and where it was showing my current real speed 0 and the real altitude little more than 80ft at the moment I took the outside screenshot, I than typed the speed to 190 fl1000 it reload and everything went back to normal until it happen again some time later same solved by opening the map page set the speed to 240 and altitude 6000ft however I realized the green bar saying REX essential has finished to inject new weather I believe is the reason why I'm having this issue as mentioned above all started with the new update with alt disagree problems I'll post on their support forum as well for see if they can provide more infos Thanks for your support as PMDG reply that they cannot do nothing as I'm using the NGX on P3D Jivan

as far I remember the F/O PFD had false reading as well only the standby altimeter was providing the correct one I believe! Out from nothing while climbing all reading correct, a stall warning sound triggered and the captain PFD soon showed the information you all seen, secondly as soon I touched my joystick for bring gently the nose down the overspeed warning start to sound. Was really confusing and I cannot understand how I gained so much speed I climbing at around 20000ft When I realized the altimeter problem I pressed the botton "B" to set the baro automatically but probably it set it to the wrong number I'm not sure if is due to REX Essential. I'm flying using the FMC all the time never had alt disagree and related problem since I installed Rex Essential Thanks for help Jivan

Hello I'm facing this problem since few flight basically once I'm near cruise altitude I get an Altimeter disagree alert, fallowed by stall warning and overspeed warning the plane loose control quick and the instrument start to show non sense information like 50000ft speed 144 vertical speed rate 3+ or so. I have few second for manoeuvre before crash on the ground or the plane get destroyed by the overspeed stress. I tried to set US metric, remove failure but nothing today it happened again and I can't understand why. one note it start since I used Rex Essential I don't know if it linked to it I've done different many flight with Rex 2.0 no problem also I'm using P3D but once again is nearly 4 month and no problem at all with the NGX please help! I manage to ge a screen before it crash Note speed 460 alt -0400 only the standby instrument shows the the right information I guess Thanks jivan

Yes the same for me no clouds pupping out, sometime I do face instant change on visibility I will try to extend the range of weather to cover with REX Essential and set the update to every 30min, therefore it shoud create a more realistic transition I think.

Yes and it worked just fine! Brillian result better than FSX now I'm setting up my NGX for a short flight with the new REX Essential using P3D

Prepar3D is fully supported by Rex Essential you just need to activate P3D with a small 4.99$ fee and you will be able to configure the software is what I'm doing right now ;)

I installed the new version and it automatically pointed P3D folder and now it seems to work happy!!! :Peace:

Can anyone guide me on how to install FS2Crew NGX and make it work on P3D, I simply copy pasted the folder of NGX on P3D after I installed sp1 and FS2Crew but I guess I'm wrong coz I does not work :( Thanks for helping me out!

Well I remember that in FSX as long I select HUD on the at the aircraft option is, is always on once I lower it any time during flight but on P3D it seems to be tourn off! By testing you mean that there is a botton for test if is working? I'll post screenshot once I'm back home from university thanks

Here my Prepar3D <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>FSUIPC 4</Name> <Disabled>False</Disabled> <Path>Modules\FSUIPC4.dll</Path> </Launch.Addon> </SimBase.Document> <Launch.Addon> <Name>PMDG HUD interface</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDG_HUD_interface.dll</Path> <DllStartName>module_init</DllStartName> <DllStopName>module_deinit</DllStopName> </Launch.Addon> </SimBase.Document> this my FSX <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>Object Placement Tool</Name> <Disabled>True</Disabled> <ManualLoad>False</ManualLoad> <Path>..\Microsoft Flight Simulator X SDK\SDK\Mission Creation Kit\object_placement.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Traffic Toolbox</Name> <Disabled>True</Disabled> <ManualLoad>False</ManualLoad> <Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Traffic Toolbox SDK raffictoolbox.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Visual Effects Tool</Name> <Disabled>True</Disabled> <ManualLoad>False</ManualLoad> <Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Special Effects SDK\visualfxtool.dll</Path> </Launch.Addon> <Launch.Addon> <Name>PMDG HUD interface</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDG_HUD_interface.dll</Path> <DllStartName>module_init</DllStartName> <DllStopName>module_deinit</DllStopName> </Launch.Addon> <Launch.Addon> <Name>FSUIPC 4</Name> <Disabled>False</Disabled> <Path>Modules\FSUIPC4.dll</Path> </Launch.Addon> <Launch.Addon> <Name>FSCopilot</Name> <Disabled>False</Disabled> <Path>Modules\FSCopilot.dll</Path> </Launch.Addon> </SimBase.Document> Thank you

Hi I've done the same copied the entries from my FSX dll.XML file and I have only the HUD one... Everything works except the HUD, Im wondering if I should copy all the entries posted above to make it work? Also do you guys getting the callout During take off or landing? Because I'm not! One last question i read that FS2crew NGX Sp1 is compatible with p3d no Idea if by simply copy and paste the folders make it work, so far it did not. Overall I found P3D more smooth with same FPS, Rex seems to work perfect with it.

Thanks for the reply I'm going to purchase P3D shortly.

Hello! a part for some issues related to import addons like NGX to Prepar3d is the overall software stable no CTD or errors FSX style? im sure my PC can give me smooth experience with P3D. I just want to fly without fear CTD. I want to buy it tomorrow and slowly move thank you

yeah done it! thanks for let me know

Hi guys can someone help me! Im having this issue the second time in a row. When I entering the data on the FMC and prepare de plane for the approach while pressing the botton of the FMC the plane freeze! So far it happen only during FMC setting on approach or prior to land only with FMC botton. The simulator does not crash to desktop but it freezes you can still hear the engine but it does not move. This it happening since I installed sp1c never had issues before.Please help I installed the lates version of FSUPC but it seems it does not solve the problem dont know what to do!

Have you tried the PA botton it open the passenger announcement. :)

Hello this is my first postIs been a while since I last see this error!!I basically had only few CTD since I last fixed my FSX and and only once happened while using the NGX I was at the gate and after 20min while setting the plane from cold and dark the simulator freezes, I just restarted and nothing happened for some time until today.I was setting the approach on the FMC prior to start descending and suddenly while pressing the FMC bottons the simulator freeze. I could still hear the sound of the engine running I waited for some time and than I opened task manager where it showed FSX not responding and after I ended the process this report came out:Problem Event Name: AppHangB1Application Name: fsx.exeApplication Version: 10.0.61472.0Application Timestamp: 475e17d3Hang Signature: 478eHang Type: 2048OS Version: 6.1.7601.2.1.0.256.1Locale ID: 1033Additional Hang Signature 1: 478e67f3a43fd209b179137c825df294Additional Hang Signature 2: 6cb2Additional Hang Signature 3: 6cb29516b0cdd70fbf0711f03003ed3fAdditional Hang Signature 4: 478eAdditional Hang Signature 5: 478e67f3a43fd209b179137c825df294Additional Hang Signature 6: 6cb2Additional Hang Signature 7: 6cb29516b0cdd70fbf0711f03003ed3fThanks for help