Pitter

I´m facing some problems since a couple of flights. I have changed nothing. I get the fltplan from Simbrief always rejectet from loading into the GTN. Then I changed the name from orign NCRG-NTAA to NCRG_NTAA (acc to the book) and then it was ok. Now the GTN rejected this format also. Only manual input possible Any tips? Peter

Just made a short flight after installing the new panel. Everything works very well. Thank you Bert for your outstanding work giving to the Community. Thank you, Peter

No, I have not touched anything. Just installed the panel as per readme and replaced the F1GTN entries with RXP GTN.. But, as I said, when I call the GTN up with SH+2, normal ops. As soon as I put them back into the pedestal, it is dark and unclickable. But as I mentioned before, it is not a showstopper for me, I can accept that. Other question: is it possible to replace the 2 (or 1) deactivated FMC screens with another GTN? So I can use them like a moving map? I don´t like the original GTN covering a part of the panel during flight Peter

Did a short flight this evening after setting up Bert´s GTN mod. Everything works a it should, no problems detected, except: my GTN750 (RXP) is dark. But when I call them up with shift+2, it pops up and works normally. If I send it back to the pedestal, it is dark again. Not a problem, if it is the way it should be. (it happens only with the F50, all other planes do not have that prob.) Anyway, a very big "thank you Bert" for the hard work. Peter

Tks a lot for this quick answer Peter

is the F50 equipped with auto throttle? Peter

for the mod. Made a short test flight today, and found no abnormalities Big thank you. Peter

Thanks guy´s I will go the easiest way via simmarket. The other course are to compicated for me Peter

Hi, the Lima stock airport in v4.5 is still named as SPIM. As ATC and SimBrief do not recognice this airport, is my question: can someone explain to me if and how to rename SPIM to SPJC Peter

Yes, it did help. Thanks a lot for your tip. Peter

Thanks for your quick answer. Here is the link: https://drive.google.com/file/d/12pChuVZLNTP_EptQa7xkhJ3WvT9Pczom/view?usp=sharing In the meantime I tried your above settings, but also with this no joy. Peter

Hi, can someone explain me how to remove the "0" parameter within the "control send when button pressed".Field If I delete them, and reopen FSUIPC, is back again. The trim via a selected switch at my yoke does not work, maybe because of that "0". But the FSUIPC.ini listed the switch for up/down Tks, Peter

Bernt, thank you very much for your panel mod, Just finished a short flight, and everything works as expected. I just had to make a small size adjustment for the GTN, because the upper half of the Radio row was not fisible. Once more,, thank you for your mod. Peter

Hi all, I´m like to update my Emb300 with the GTN750. Which one should I get: Flight1 or RXP??. I have read at Simbrief that the flightplan export works for the F1 GTN. In this case , I do not have to insert a fltpln manually, which is a big plus for me. Any suggestion? Thank you Peter

Can you confirm, that ASC and P3dVxx are on the same drive, like both are on C: or D or another Peter

Thank you for your help. Unfortunately it did not work at all. No Xgauge weathermap nor even a frame. I checked my gauges folder, there is no XGauge present. ActiveSky is installed in "C", and P3D in "D". So I copied over from C to D the XGauge folder, but no success at all Peter

Hi all, I would like to install xgauge into my 757 panel. But not as a pop up. In the "VCockpit05" is a gps entry: "Gauge01=gps!fs9gps, 535,650,475,345" which I can use for.the xgauge My question is: with what do I replace the "gps!fs9gps" Thanks Peter

Wayne, tks for your help. But, don´t get mad: I am feel not comfortable enough to doing such filework. If there no other way, then I leave it as it is. Is not that big problem, just looks a litle strange. Thanks anyway Peter

Thanks for your help. HDR was off. Switching it on does not change the look of the PFD/MFD Peter

Hi all, is there a way to adjust the colour of PFD/MFD? Peter

Disregard, Plane deleted Peter

Does someone know how to disable the pallet loader on the cargo airplanes, because they blocking the GSX loader at each door. Deaktivate via Posky Utility Panel does not work. Peter

787-9 panel from Rikooo

I have succesfully merged the 787-9 panel into SSP 777-200LRF. But, one problem which I cannot fix: as soon as I open a cargo door, the SSP/Posky own loader show up in front of the cargo door and blocking the GSX loader. Switching off the loader inside the utility panel, as well as removing the whole utility gauge from panel.cfg does not help. This does not happen at the 787-9, no SSP/Posky loader at all. Does someone know how to fix that? Peter

Hi Bob, FYI: iFly give you a 50 % discount if you own the FSX version 50% Off for Previous FSX Version Customers This upgrade allows you to purchase the Prepar3D v4 version at 50% off. If you have the download version, please select the Coupon/Voucher button, and use the Auto Coupon option. If you have the DVD version or purchased from a 3rd party and would like the upgrade discount, please submit a ticket via the Flight1.com website (include the serial number with your ticket) and they should be able to assist you in getting the discount. Peter