Pitter

When I start RC I get the msg: Cannot link to FSUIPC or Wide Client. I made a complete fresh install incl Win10, P3Dv3, FSUIPC, FSC RC (registered) and msstdfmt.dll succesfully registered. But, when I start RC I get the msg: Cannot link to FSUIPC or Wide Client. I have 3 SSD´s installed: C: Windows only, D: P3D only and E for programms, including RC, FSC and so on Any help is very appreciated Peter

https://www.captainsim.org/forum/csf.pl?num=1419588831 go to the last entry, written by garrettprs Peter

Go, get it. I´m using it since more then one year, and more then happy. There are some panel mods wich increasing the fps. In my eyes there are two faults, which are not fixes bei CS. 777-200 Pax wrong calculating of the zfw because unreliable cargo container weight 777-200F if you load the 200F for example next day, another livery, you have to reload the cargo again. Peter

If you have GSX Level 2, try to disable Level 2 via the Add On manager and check again. Peter

Yes, I did that Peter

A couple of weeks I switched from HDD to SSD. Made a fresh install Win10 on 250 SSD C:\ drive, and also fresh FSX onto 500Gb D:\ Since then it takes a looong time to start FSX, and even much more longer if I change to another plane. It feel like double then on the old HDD. FSX performance itself is equal or even better during flight. No other change in HW or SW. Trim is on for both. Thank you for any tips Peter Win10Home, I7@3,8 8Gig RAM

Hi Ray, ok, wl take care. Thank you Peter

Hi Ray, you are my HERO. You found the prob and, inportant, you give me also the solution. A very very big thank you for that. Flt plan without changing anything is only Simbrief. FSC10 shows Win crlf but only utf8 and can be converted to utf8bom, So OnlineFlightPlanner, I was unable to convert. But no prob at all,leave them away. Here my files in "rcv4x\Data" a4, c4, f4, m4, n4, p4, r4, s4, z4. All cvs. Once more thank you very much, RC4 is back Peter

Ray, first of all thank you very very much for your help. The solution you gave me is a little bit hard to undersstand for me. But I will try. One more question: the pic, which you attached, is that a screenshot of your "rcv4x\Data" folder?? If so, I do not have them all. I have only *4.** files. Can that be the problem? Because those 3 fltplan are from 3 diff sources, like FSC10, OFP and Simbrief which I use since years without prob. Peter

Ray, try this: right click the link, save link address, open a new browser window, paste the link inside, a web.de notification comes up, wait a second and you have the file Peter

Ray, I do not know what that problem now is.I copy and paste the link from my mail inbox. If I click on the link within my mailbox, then it is working. Do you have anything where i can sent the mail? Peter

Ray, here is the link: C:\Aerosoft\FSC10\Flightplan\RC https://www.filehosting.at/file/details/780996/EDDW-EDDM.pln Peter

Hi Ray, rebuilding Database: a4.csv as well as r4.csv getting new timestamp. c4.csv unchanged!! When loading fltplan into RC4, (.plan) I get only the to @0 (Alt1- , Alt2-)/ *RVSM . No Plan is loaded. I tried xxx-xxx as well as xxxxxx, Also changed the path to the fltplan to be loaded and tried plans made from FSC10, OFP and Simbrief. All same result. Pushing now, even he did not find/load a plan, the PB "Start RC" then again that external warning "Cannot link to FSUIPC or WideClient Peter

Ray, yes I'm running FSX and RC4 on the same computer Forget about the pic Normally FSC10, for longer flights Simbrief and sometimes OFP (Online Flight Planner)

Ray, yes FSX and RC4, no more P3Dv3 The link was only for the pic, to show you how it looks when I try to load a plan into RC. Maybe that makes it more clear to you. Peter

Ray, sorry for coming late. So, as you suggested, new FSUIPC as well as new MakeRunways. Executed MakeRunways, created a new fltpln, started RC: nothing, same fault as before. (here you can see a pic of it https://www.avsim.com/forums/topic/430017-simbrief-fsxpln-files-and-rc4/. After Makerunways I checked the "Data" folder within RC4 and there are no *5.xxx files in there. Only *4.csv. Acc to the readme file inside Makerunways there should be some others. Maybe that's the prob. Peter

Ray, tks for your quick response. Checked the folder, all unchanged. I re-installed RC over the existing one, no luck. Same fault as before. I'm not the pc guru, but for me it looks that the failure is somewhere else, not inside RC. The last couple of days I installed ORBX Global, and 3 LC, plus 2 freeware airports 2 days later. After the ORBX installation I did a couple of flights, all normal. And yesterday I re-installed Eaglesoft Citx. Later on the problem start. I cannot think that the Citx demaged my RC, but I will uninstall that and let you know. Peter All FSX, no more P3Dv3

Hi since the last scenery rebuilt RC does not load any flt plan anymore. When I click "load Flt plan" in the upper left corner, the flt plan window shows only "to @0 (Alt1- , Alt2-) / *RVSM" and if I clicking "Start RC" I get a FSUIPC warning "cannot link to FSUIPC or WideClient. New FSUIPC installation did not help. Any help very welcome Peter

I have all my RC key's changed to "Control+Number". Works also with the E-Jets v2 Peter

Try changing the UpperFilters key to 0 (zero). Restart windows and then change back to PartMgr. That helped me with the same prob. Peter

Received my key already. Was like "overnight delievery" Peter

Ray, was thinking about it. But, as you know, since a little time, it never get that speedy as looooong time before. Never mind, I will send it now and one or two beer and then is night curfew at home. Have a nice evening and once more thank you. Peter

Ray, that make it more clear to me. I´m not a pc guru. I just setting up again FSX after the shift to SSD drives. If all run well then I will sent the request to JD in a couple of minutes. Thank you both for your help, and I do hope I do not have to ask again Peter

Ray, first thank you for your reply. Do I get it right: install as always. Make a Folder on "D",. call them RC.(Both sim´s are on "D") Install RC into this folder. After getting my new key and register succesfully, make a copy of this folder and adjust path to P3D make a copy of the shortcut and adjust path for p3d inside, so that I have 2 shortcuts for RC Peter

Hi all, what about RC when I have installed both sims? To use RC do I need install them twice, in FSX and in P3D. Or is it ok to install RC into the "C" drive? FSX and P3D are sitting on "D". Those are two SSD´s (C=250G, D=500G) and the PC is Flightsim only. Tks for advice Peter