Timm

All sorted - The Aircraft has a Aircraft Configurator so just went in there and switched from DEFAULT to RX and hey Presto all working. Many Thanks Timm

Hi, Sorry about that. I'm on FSX ACCEL. I can get the RX530 to work in the A2A Cessna C172 with no problems, but it just wont show in my new A2A Cessna C182T. Added some more info on my main section.

Hi Guys, Hope some one can help here. I got both the GNS-430WAAS and 530 looking at the version these are from 2012 and version 1. Problem I am having is that the RX530 has gone in on my A2A Cessna C172 Trainer and works well, but for some reason I can't get the 530 to show in my new A2A Cessna 182. When I open up the RX config app where it lists all my aircraft it lists the 182. It installs all the various lines in the Aircrafts panel config but am not able to see it n the aircraft. QUESTION: Do I need to re-purchase these again which seems a pointless exercise when I already have them. Any help will be greatly appreciated. C182 Panel // Default [Window Titles] Window00=Main panel Window01=Clipboard Window02=Mini controls Window03=Payload and fuel manager Window04=Map Window05=GPS Window06=Maintenance hangar Window07=Pre-flight inspection Window08=AFK Window09=none2 Window10=dbg Window11=none3 Window12=none4 Window13=gps295 Window14=gns400 Window15=Reality XP GNS 530 WAAS - RXP_CONFIG_TOOL - DO NOT CHANGE Window18=Reality XP DropStack [Vcockpit08] Background_color=0,0,0 size_mm=512,512 visible=1 pixel_size=640,640 texture=$gps1 gauge00=rxpGNS!GNS530, 0,0,511,372

Hi, Guys, I got CP last week and having one hell of a time trying to get key commands to bind with FSX and CP. I use a X52 Pro stick and have major problems with trying to allocated stick commands to the POV HAT No 2. Is anyone else having this issue? I can get the main hat switch to act as my pan hat. My main question is are we still able to use the Saitek software or has this got to be disabled? Also I can save Camera position in both Cockpit and External views only to find after a while I get the green button showing to save, but I haven't changed anything

Hi Guys, One view I would love to do and not sure if CP can do it, and that is as we all know when in external when you pan around the Aircraft the Camera pans with the Aircraft being stationary, Now I fly a lot of helicopters and would be nice lets say when I come into land and see the Heli pad that I can rotate the Helicopter to adjust my position instead of the camera moving. Is this possible?

Hi Guys, Shes still being flown on a daily basis. I just got her back from the paintshop as I have had the three wheel fairings painted to match the rest of the Aircraft.

Hi Thanks for that, got the SP but for some reason the parking cones have got worse both now are floating of the ground, even more before the SP.

Hi Guys, Sorry if I sound abit dumb here but in an earlier post I mentioned that I could not get my RXP430 to show, it seems that I did not get it in the first place when I got the 530. My question is why has this aircraft got two GPS surely they do the same job, and the 530 gives more info than the 430 so whats differance other than the size does having two GPS.

Hi, I sent a support mail to Carenado regarding the cargo hatch error and what I got back was Carenado Support, Aug 27 17:05 (CLT): Greetings. Thank you very much for your feedback, we´ll fix that in a future patch we might release for the aircraft. How many times do we have to go down the same path everytime a new aircraft gets released. I would love to know how and they go about the beta testing I think most of them are blind and need an eye test. A 10 year could do better. Another thing that they have missed is have alook at the near parking cone this one is hoving off the ground where as the far one is fine. Also have a look on the fuel lever (red one) the red texture has another overlapping texture on it. Surely they must have seen this. I think this will my last Aircraft from these guys as they seem to be getting worse each time a new aircraft comes out.

Hi, Great Aircraft, However has anyone noticed that when you click the Passenger Door open box in the control panel the small cargo door opens instead. Also regarding the RXP 530 and 430, now this is the first Aircraft I have seen both how do you get the both to show? I have run the config file but as you can see I'm not getting the 430. Also if I go through the main RXP config setup it only allows me to have one and not the both.

Hi Joe, I also sent them a mail on this just after this version came out and got this back. Greetings.Thank you for your valuable feedback. We added the air intake problem as a fix for a future patch we might release for the aircraft. Don't like the "WE MIGHT" which they used. As paying customers I would have thought it should be WE WILL. Joe couldn't help noticing that your FPS are very low ?

But how do you go about doing it through FSUIPC? (I have a reg version) Saying that I haven't even got a F13 key. and FSUIPC does not recognize the shift key 530_RKNOBI_R=SHIFT+CTRL+f13

That is what I have done as well. But how do you go about doing through FSUIPC? (I have a reg version) Saying that I haven't even got a F13 key 530_RKNOBI_L=SHIFT+CTRL+f12 530_RKNOBI_R=SHIFT+CTRL+f13 Thanks for your help on this matter

Hi Aaron, Try shift+4 and not F4. I have mine set on Shift+3. Mr Bert Everything working fine, except I notice that when I hover over the RIGHT INNER wheel I get a small ballon pop up stating "CHANGE PAGES WITH GROUP" this I am not able to do. I get the orange arrow thing on the outer knob and able to change pages etc but when I select a certain group I cannot select pages within that group.

Hi Bert, Interesting post this. Just one small question. You state "Set the panel to show the Carenado GPS " (run CAR530.exe if in doubt). so when you have done editing do you install the 530 via the config setup or what? and one last thing where is this file kept the Main Reality XP rxpgns.ini file. Not the one for the airplane.

Done some touching up on the GPS. Added XP to the VC one, re-done the VNAV button.

Hi, After some cutting and pasting I have done my own VNAV button on the GPS. So now the two match up. If anyone would like a copy PM your email address and I will send you a copy.

Hi, One for you Mr Bert. I went and got the Reality XP GPS for my 206 and for the other Carenado aircraft I have, and as pointed out in this post the TERR button on the GPS is still visable on the VC panel which now does VNAV, But on the pop up 530 the terrain button has been changed to read VNAV in stead of TERR. Question is it possible to get the VC GPS to read VNAV? Yet another attention to detail missed by the Carenado team

Hi Guys, Ok here is a little question for you. I'm parked up at my local strip "Compton Abbas". Check everything is OK Fuel etc etc. Start the 206 up, taxi down to end of strip. and off we go, reach the correct speed, but she just wont lift off the ground, I have to change the plane and then go back into the 206 and everything seems OK. Now I have had this on other Aircraft as well what causes this problem. To me it feels like shes to heavy .

Hi Bert, Your the man :clapping: . Works a dream much more rudder movement now. Thank you.

Hi Guys, Bert you seem to be the man with the answers on this subject. I use Saitek rudders and notice very little rudder movement if I push full Right or full Left. If you see from the shot below. Would this be about right then? And what would the best setting in the control panel for the rudders ? Centre Left Rudder Right Rudder Control Panel

Hi, Hope someone here can answer a small question regarding How does the front seat passnager get in/out of this aircraft? Doe's he have to climb over the pilots seat to get in/out as I notice there is no side door for him. I would think that way would be abit tricky with the yoke in front of him and the three engine levers in the middle. Or does his seat push back so he can wiggle out the rear doors? or even climb in and out of the window :rolleyes:

Hi Guys, Not sure if it was currect but I always thought that the Stationair logo on the tail was just a bit to steep on the way it was placed on the tail, so with a bit of touching up just re-postioned, it in my eyes seems to look better. Again if any one would like PM with you email address and I will send straight out. I like this texture so much I have put it on the default dialed version as well, along with a new interior Before After New Interior

Hi Bert, Bert I think changing to 32bit mproves the shimmering of the rivits, I don't use any mipmap when saving and I save the textures as DDS 888-8 32bits I have use the extended version but I am more than happy with DDS.

This what happens when you have been Military Instructor for some 15 years, you seem to look for the small things that don't look right - PAYING ATTENTION TO DETAIL