FSXDan

Hello, I have both honeycomb throttle with autopilot, and the realsimgear GFC500 autopilot. With either/or both connected, and the Dual G5 (through air manager), I am trying to get VS to increase altitude and then capture the set altitude and then altitude hold. I could have sworn this worked before the update, but when I try to put VS to +400 for example, and set altitude to 2500 feet, it just blows right past it and im not entirely sure why. Again could have sworn that VS turned off when reaching ALT but now it does not. This is on the JustFlight Arrow III. Thanks!

The Default XP11 GNS 530 installed does not work when using a popout RXP 530 for my RealSimGear product. It just sits in one spots and rotates to the track and heading I am flying but the map doesnt physically move. It does move fine on my RSG GNS 530 but the default GNS530 in the avionics deck on the plane does not move, just rotates in the direction I am going. Example if im at KLAX and fly south, the map rotates to a heading south but stays at KLAX...

So by default RealityXP is putting a GTN 750 in the location of the avionics or the stock GNS 530 from XP11. Can I make that a GTN 650 instead?

So this is weird, and hard to produce a video or photo but I get a small mouse flicker when going through parts of the VC but mainly visible from the FMC when popped out. Appears to be ok when it is not popped out though. Its like a smaller version of my mouse with a heavy flicker to it and shows up on parts of the MCP as well but not as well. It's directly 1-1.5 inches to the right of the mouse and trails it or clones it the entire way. What could it be? I tried to clean install the NGX and remove folders wherever I could but same thing. This also does not occur in the 777 when I tested, neither the QW 757 and various other aircraft, just the ngx..and all variants. Im stuck...it just came out of nowhere. testing it further I see it occurs when my mouse passes each crevice between buttons. So each button has a little gap on each side of it, when my mouse crosses those, it seems to glitch out a ###### and create this secondary flashing mouse next to it...

Hello, My HUD display is missing in my NGX and other 737 variants for P3D. Any fix to this, I can't seem to figure it out. I have purchased both base package as well as the 600-700. Thanks!

all i hear is the sound of vegas slot machines...im sure the buy page is going nuts

OMG THANK YOU

sounds good hopefully well get that goin tonight

it is released for fsx! and fsx:se I believe. But I am wondering how to do a clean install...via ops center?

ok so I see the update in Ops Center, but....what is the best method of installing if we want a clean install? All I have is my previous order page with the NGX Base....is that sp1d included? Thanks

Hey Everyone! I just bought a Samsung 850 SSD and am excited to get my FSX transferred over. Now I know a clean install is probably the best way to go, but I also have P3D and a TON of addons/sceneries and it really would be a pain. So I have chosen the /J Junction method which should be ok. However for SOME reason I can not rename the root microsoft games folder that ive copied over to the new drive, in the old drive. I am trying to rename it to Microsoft Games_BACKUPHDD. I get the error: "The action can't be completed because the folder or a file in it is open in another program. And I use the unlocker program and get: http://puu.sh/giMd9/e7c70882af.png Please please if someone could help me. What is using that Fonts folder and those .ttf files! It's in System so i can't just close the process. I need some help. Thank you!!

so are we at the point where they may release the fsx/fsx:se AND the P3D version at the same time, or around same time?

Hey everyone! I have read many forum posts including on here, of how to move my FSX folder and P3D...from my 1TB HDD to my new 512GB SSD drive. I hear MKLINK is the best method, but which. This forum has posted to use /J and others /D. Not sure if this is even the best method. My questions are as follows. 1) What is the most up to date procedure of moving FSX over without having to reinstall all my sceneries and addons (there's a lot!!). and 2) if it is simply as a mklink from the old D drive to new E drive....will it still be slow like the HDD or will this be fully optimized still for SSD. My thought for a moment was that since its still a junction to the old D drive, that it somehow still uses the D drive and would make it HDD laggy than everything just running SSD. I think I am wrong on this but wanted to ask. Thanks again for your help !

Hey everyone! I have read many forum posts including on here, of how to move my FSX folder and P3D...from my 1TB HDD to my new 512GB SSD drive. I hear MKLINK is the best method, but which. This forum has posted to use /J and others /D. Not sure if this is even the best method. My questions are as follows. 1) What is the most up to date procedure of moving FSX over without having to reinstall all my sceneries and addons (there's a lot!!). and 2) if it is simply as a mklink from the old D drive to new E drive....will it still be slow like the HDD or will this be fully optimized still for SSD. My thought for a moment was that since its still a junction to the old D drive, that it somehow still uses the D drive and would make it HDD laggy than everything just running SSD. I think I am wrong on this but wanted to ask. Thanks again for your help !

Hey everyone! I've read many forum posts and just want to get the best up to date procedure of moving my FSX and P3D folders to my SSD. I just bought a 512 GB Samsung Pro 850 SSD, and I want to transfer FSX from my 1TB HDD to get a bit of quicker load times. Since I have the SSD anyways, I want to make the transfer. What is my best bet...doing a MKLINK? because I have so many addons, it would be really tricky in my opinion to uninstall everything (a lot of stuff for p3d, a lot for fsx, not sure which are which sometimes in the uninstall list)...anywho, I think registry errors up the yahoo would occur. I am thinking maybe a MKLINK thats required. I have seen instructions on this forum saying use mklink /d and others saying mklink /j. What is the best situation for me to take in this predicament. Thank you again for all your help