Jump to content

FSXDan

Members
  • Content Count

    52
  • Donations

    $0.00 
  • Joined

  • Last visited

Everything posted by FSXDan

  1. Hello, I have both honeycomb throttle with autopilot, and the realsimgear GFC500 autopilot. With either/or both connected, and the Dual G5 (through air manager), I am trying to get VS to increase altitude and then capture the set altitude and then altitude hold. I could have sworn this worked before the update, but when I try to put VS to +400 for example, and set altitude to 2500 feet, it just blows right past it and im not entirely sure why. Again could have sworn that VS turned off when reaching ALT but now it does not. This is on the JustFlight Arrow III. Thanks!
  2. The Default XP11 GNS 530 installed does not work when using a popout RXP 530 for my RealSimGear product. It just sits in one spots and rotates to the track and heading I am flying but the map doesnt physically move. It does move fine on my RSG GNS 530 but the default GNS530 in the avionics deck on the plane does not move, just rotates in the direction I am going. Example if im at KLAX and fly south, the map rotates to a heading south but stays at KLAX...
  3. So by default RealityXP is putting a GTN 750 in the location of the avionics or the stock GNS 530 from XP11. Can I make that a GTN 650 instead?
  4. So this is weird, and hard to produce a video or photo but I get a small mouse flicker when going through parts of the VC but mainly visible from the FMC when popped out. Appears to be ok when it is not popped out though. Its like a smaller version of my mouse with a heavy flicker to it and shows up on parts of the MCP as well but not as well. It's directly 1-1.5 inches to the right of the mouse and trails it or clones it the entire way. What could it be? I tried to clean install the NGX and remove folders wherever I could but same thing. This also does not occur in the 777 when I tested, neither the QW 757 and various other aircraft, just the ngx..and all variants. Im stuck...it just came out of nowhere. testing it further I see it occurs when my mouse passes each crevice between buttons. So each button has a little gap on each side of it, when my mouse crosses those, it seems to glitch out a ###### and create this secondary flashing mouse next to it...
  5. Hello, My HUD display is missing in my NGX and other 737 variants for P3D. Any fix to this, I can't seem to figure it out. I have purchased both base package as well as the 600-700. Thanks!
  6. all i hear is the sound of vegas slot machines...im sure the buy page is going nuts
  7. it is released for fsx! and fsx:se I believe. But I am wondering how to do a clean install...via ops center?
  8. ok so I see the update in Ops Center, but....what is the best method of installing if we want a clean install? All I have is my previous order page with the NGX Base....is that sp1d included? Thanks
  9. Hey Everyone! I just bought a Samsung 850 SSD and am excited to get my FSX transferred over. Now I know a clean install is probably the best way to go, but I also have P3D and a TON of addons/sceneries and it really would be a pain. So I have chosen the /J Junction method which should be ok. However for SOME reason I can not rename the root microsoft games folder that ive copied over to the new drive, in the old drive. I am trying to rename it to Microsoft Games_BACKUPHDD. I get the error: "The action can't be completed because the folder or a file in it is open in another program. And I use the unlocker program and get: http://puu.sh/giMd9/e7c70882af.png Please please if someone could help me. What is using that Fonts folder and those .ttf files! It's in System so i can't just close the process. I need some help. Thank you!!
  10. so are we at the point where they may release the fsx/fsx:se AND the P3D version at the same time, or around same time?
  11. Hey everyone! I have read many forum posts including on here, of how to move my FSX folder and P3D...from my 1TB HDD to my new 512GB SSD drive. I hear MKLINK is the best method, but which. This forum has posted to use /J and others /D. Not sure if this is even the best method. My questions are as follows. 1) What is the most up to date procedure of moving FSX over without having to reinstall all my sceneries and addons (there's a lot!!). and 2) if it is simply as a mklink from the old D drive to new E drive....will it still be slow like the HDD or will this be fully optimized still for SSD. My thought for a moment was that since its still a junction to the old D drive, that it somehow still uses the D drive and would make it HDD laggy than everything just running SSD. I think I am wrong on this but wanted to ask. Thanks again for your help !
  12. Hey everyone! I have read many forum posts including on here, of how to move my FSX folder and P3D...from my 1TB HDD to my new 512GB SSD drive. I hear MKLINK is the best method, but which. This forum has posted to use /J and others /D. Not sure if this is even the best method. My questions are as follows. 1) What is the most up to date procedure of moving FSX over without having to reinstall all my sceneries and addons (there's a lot!!). and 2) if it is simply as a mklink from the old D drive to new E drive....will it still be slow like the HDD or will this be fully optimized still for SSD. My thought for a moment was that since its still a junction to the old D drive, that it somehow still uses the D drive and would make it HDD laggy than everything just running SSD. I think I am wrong on this but wanted to ask. Thanks again for your help !
  13. Hey everyone! I've read many forum posts and just want to get the best up to date procedure of moving my FSX and P3D folders to my SSD. I just bought a 512 GB Samsung Pro 850 SSD, and I want to transfer FSX from my 1TB HDD to get a bit of quicker load times. Since I have the SSD anyways, I want to make the transfer. What is my best bet...doing a MKLINK? because I have so many addons, it would be really tricky in my opinion to uninstall everything (a lot of stuff for p3d, a lot for fsx, not sure which are which sometimes in the uninstall list)...anywho, I think registry errors up the yahoo would occur. I am thinking maybe a MKLINK thats required. I have seen instructions on this forum saying use mklink /d and others saying mklink /j. What is the best situation for me to take in this predicament. Thank you again for all your help
  14. I turn it on Nvidia surround, with the resolution for bezels it turns to 6020X1080. I am only using those PMDG planes and the majestic dash 8, I use the dash 8 the most and really want to start flying, but it looks like crap, everything all zoomed out now with the truewidescreen aspect on, and its all zoomed to the center screen with a lot of stretching on the left and right monitors. I really wanna fly :( how do I fix this? Here is my fsx.cfg Here is my Majestic Dash 8 Panel.cfg
  15. how are you guys doing this, what are you editing exactly in the panel.cfg for the dash 8?> I am running on 5760 x 1080 and all 3 monitors are black when I try to enter full screen plus mouse flicker. and in windowed mode I cannot stretch it further than the middle screen when I hit maximize. Weird, how do i fix this??
  16. Hey everyone, I just got my PC built, and it is rather beastly. I am finally desperate to get on my flight sim. But when I load it up, it only fits on one screen, my primary middle. I have 3 Asus VG248QE models, 2 of them running DVI and the last running displayport to a EVGA GTX 780 dual classified (will be getting a second card in the near future to SLI but for now, without it). I am running Nvidia Surround and set it up properly, It works fine for other games. I also use a program called FSX Booster 2013, it really is a great program that sets up your fsx.cfg nicely. However I think for this it may have made my fsx.cfg broken. I also have UltraMon running. Anytime I open FSX it sits in my middle screen. I have to physically stretch each side to the edges of my screens, if i hit maximize it only maximizes to one screen. I also tried to autohotkey trick, it didnt even work when I hit win+F11, nothing happened. So im not sure if something is blocking it from maximizing in window mode to three screens? When I hit ALT+Enter however, I get three black screens, I can hear the plane in the background and I can see a bright black screen, but nothing else. Not sure why this is occurring. I mainly fly the PMDG 737, 747, 777, and Majestic Dash 8-q400. Do you really have to adjust the panel.cfg for these? and how would you do that, Ive never messed with those. if someone could help me I would really appreciate it. I have been waiting 4 months for this moment :(
  17. Hey everyone, I just got my PC built, and it is rather beastly. I am finally desperate to get on my flight sim. But when I load it up, it only fits on one screen, my primary middle. I have 3 Asus VG248QE models, 2 of them running DVI and the last running displayport to a EVGA GTX 780 dual classified (will be getting a second card in the near future to SLI but for now, without it). I am running Nvidia Surround and set it up properly, It works fine for other games. I also use a program called FSX Booster 2013, it really is a great program that sets up your fsx.cfg nicely. However I think for this it may have made my fsx.cfg broken. I also have UltraMon running. Anytime I open FSX it sits in my middle screen. I have to physically stretch each side to the edges of my screens, if i hit maximize it only maximizes to one screen. I also tried to autohotkey trick, it didnt even work when I hit win+F11, nothing happened. So im not sure if something is blocking it from maximizing in window mode to three screens? When I hit ALT+Enter however, I get three black screens, I can hear the plane in the background and I can see a bright black screen, but nothing else. Not sure why this is occurring. I mainly fly the PMDG 737, 747, 777, and Majestic Dash 8-q400. Do you really have to adjust the panel.cfg for these? and how would you do that, Ive never messed with those. if someone could help me I would really appreciate it. I have been waiting 4 months for this moment :(
  18. So..do you not need Rex Essentials Plus (w Overdive was my choice)...is this the new product that covers all the features of Rex Essentials Plus? I currently use Active Sky 2012 + Active Sky Next as you need both for texture install and new weather injection. Is this rex product the same thing where you need both to be able to flight plan and achieve new textures + Injection? Thanks, sorry for the confusion
  19. thanks for the reply!! Are there any updates announced or whats coming new, something like a save state situation?
  20. Hey everyon, again looked for some helpful responses on these questions but no luck, hoping someone could answer: 1) elevator press on my alarm menu is always on before takeoff, how do you remove that? 2) with the PMDG you can save your panel state, say ready for taxi, how can you do this on the dash 8? Thanks!
  21. Hey everyone, tried to look around youtube and google, where can I enter the weather data from active sky e.g. 250/7, like I would in PMDG into the perf, but where is this entered on the Dash 8? Also, once I am ready to basically taxi, my settings are setup ready to taxi, how can I save that panel, like PMDG I would save the panel state in the Dash 8? Thanks for the help!!!
×
×
  • Create New...