braudoux

Hello, Before all, I need to state that I am located in China and the connectivity here is subjected to the usage of VPN. I am using payware vpn (ExpressVPN and SmartDNS). But to connect on the VATSIM network, I need to use a Chinese vpn agreed for gamers QIYOU. If I try to connect with no VPN at all, the message (see screenshot) is shown and AS16 closes If I try to connect with QIYOU, the message (see screenshot) is shown and AS16 closes If I try to connect with VPN payware, the connection is done and AS16 works. So what I am doing is activating my payware VPN and launch AS16. Once the connection is done, I shutdown the VPN and activate the QIYOU vpn. But after some time, AS16 warns that there is no connection and need to try later... So is there a way to make AS16 work with no Internet connection? How can I resolve this situation? Thanks if you can help me... Regards Bruno

Which is exactly the same as mine after your suggested modification 😞 Will send you the full file... Thanks

Hi Alex, Thanks for your reply. I have removed the "3 dots" entries and still only one area is shown. May I ask you a mail or a personal address where I could send you the full file, please

Hello, Something strange happens to me with one file User Airspaces. It includes 41 areas entered according to the same code but only one is visible... That file was working properly in the past but for sometime now, it doesn't... Could anyone tell me what's wrong in the following sample of the code: AC F AN CBA1C SP 0,2,0,176,80 SB -1,-1,-1 AH UNLTD AL FL115 V Z=200 DP 51:00:56 N 002:34:22 E DP 51:00:45 N 002:37:40 E DP 50:51:52 N 003:25:52 E DP 50:50:47 N 003:26:49 E DP 50:40:59 N 003:20:02 E DP 50:50:35 N 002:36:54 E ... AC F AN CBAC25FC SP 0,2,0,176,80 SB -1,-1,-1 AH FL195 AL FL115 V Z=200 DP 47:39:36 N 006:00:13 E DP 47:36:40 N 006:14:49 E DP 47:35:00 N 006:20:41 E DP 47:32:00 N 006:20:00 E DP 47:20:00 N 006:36:12 E DP 46:58:02 N 006:10:52 E DP 46:58:24 N 005:47:29 E DP 47:05:00 N 005:36:30 E DP 47:28:10 N 005:36:30 E ... AC F AN CBAC25FW SP 0,2,0,176,80 SB -1,-1,-1 AH FL195 AL FL065 V Z=200 DP 47:44:30 N 005:36:30 E DP 47:39:36 N 006:00:13 E DP 47:28:10 N 005:36:30 E DP 47:05:00 N 005:36:30 E DP 47:19:23 N 005:11:46 E DP 47:42:56 N 005:14:59 E ... AC F AN CBAC25FE SP 0,2,0,176,80 SB -1,-1,-1 AH FL195 AL FL115 V Z=200 DP 47:20:00 N 006:36:12 E DP 47:17:32 N 006:57:53 E DP 46:57:37 N 006:28:33 E DP 46:58:02 N 006:10:52 E ... Among the above list of areas, only the CBAC25FW is displayed... None of the others shows. Thanks for your help Bruno

Hello, Since I have updated to 2.6.18, when I select the theme OpenFlightMaps within France, the map is loaded but immediately disappears to leave a black background. Whenever I change the scale, the map flashes and disappears immediately. Any knowledge about this behavior? Thanks Bruno

If I rely on your last post, the line 574 is the code for MOA : {"M", map::MOA}, so If I assign M to AC class, area should be shown if I select MOA in the selector. Unfortunately, it is not happening... Image 1: areas are G class, all shown. Image 2: area TSA6 is M class and doesn't show. Is there anything wrong in my process? I may have misuunderstood 😉 Extract of my file: AC M AN TSA6 SP 0,2,0,176,80 SB -1,-1,-1 AH UNLTD AL FL195 V Z=200 DP 48:48:13 N 001:52:35 W DP 48:03:56 N 001:52:31 W DP 47:43:58 N 002:02:43 W DP 47:49:16 N 003:05:26 W DP 48:03:50 N 003:29:19 W DP 48:17:36 N 003:28:40 W DP 48:38:02 N 002:53:26 W ... AC G AN TSA6C SP 0,2,0,176,80 SB -1,-1,-1 AH FL275 AL FL195 V Z=200 DP 48:38:02 N 002:53:26 W DP 48:17:36 N 003:28:40 W DP 48:03:50 N 003:29:19 W DP 48:18:14 N 004:30:00 W DP 48:29:48 N 004:00:30 W ... AC G AN TSA8A SP 0,2,0,176,80 SB -1,-1,-1 AH FL335 AL FL195 V Z=200 DP 48:48:36 N 001:21:59 W DP 48:43:35 N 000:13:18 E DP 48:01:03 N 001:01:30 W DP 47:50:53 N 001:17:54 W

Hi Alex, Thanks for your reply. Are all of the L269-L306 area types implemented? I tried W and GP for testing purpose and there is no airspace shown in the map. RMZ works as class G... I will temporarely use G airspace to display my TRA/TSA as there is no G airspace in France. Thanks anyway and waiting for a further implementation of MOA and Military Use airspace... Cheers Bruno

Hello, I am creating my own airspace library using the OPEN AIR format. I do understand the classes in the below list but I need to class some areas as MOA but I don't know which AC Class I must assign among this list: ************************************************************************** AIRSPACE related record types: ============================== AC class ; class = Airspace Class, see below: * R restricted * Q danger * P prohibited * A Class A * B Class B * C Class C * D Class D * GP glider prohibited * CTR CTR * W Wave Window ************************************************************************* 1. Which class should I use to create an area with the MOA status ? 2. What class matches with all types available in LNM? 3. Which file includes all areas currently available in LNM and where is it located? By reading the file, I would be able to understand... Thanks in advance for your help. Bruno

Yes there is a Favorite option to select the aircraft we want to see

Thanks to all of you for your replies. I did a checklist with your recommendations and could correct some mistakes new Aircraft Config file entry OK unique new sequential number OK unique Title OK unique UI identity/variation, OK pointed it to the Texture Iwant it to use. OK miss the first [ Checked OK Missing parts or duplicate numbers of the [fltsim.#] Checked OK sim=<airfile name> Checked and corrected OK model=<model folder> is pointing to "a" model folder Checked OK After these correction, I have increase the number of aircraft available but : [fltsim#2] is not visible (title=Douglas C-47 Armee de lAir GT 3/62 Sahara [fltsim#3] is not showing the interior and external texture (aircraft black and interior black. I am attaching the aircraft.cfg below (only fltsim paragraphs) Thanks in advance Bruno

Hello, I have installed 3 repaints for the Manfred jahn's c47" vintage aircraft, Then, I have downloaded from Avsim Library 3 aircraft repaints presented as P3D v4.5 compatible. I have, as usual, copied the folders in the SimObjects/Aircraft folder And I did update the aircrafgt.cfg as I use to do. When P3D v4.5 is running, I want the select one of these repaints and none is visible. Can someone help me resolving this issue? Thanks in advance Bruno

Sorry, did not catch it before... Thanks anyway for replying, will proceed Bruno

Hello, I am using P3Dv4.5 with Thrustmaster MFD controllers. I use it to set my cockpit views with EZDOK and my 2D panel through P3D. I am able to assign any panel until the window number is < 9. The FMS of one of my aircraft is set as Window_13. I cannot find a way to assign this panel to a key of my controller... any idea? thanks in advance Bruno

You are a magician... If I knew that, I would not have disturbed you... So to summarize, if you have this MSVCR120.dll issue, just install redist 2013 (64 and 32 bit)... Thanks Alex

Should I reinstal the redist files with 2013 version when I am already having Microsoft Visual C++ 2017 (x64) Redistributable is installed.as well as Microsoft Visual C++ 2015 (x86) Redistributable ? Or should I reinstal the same version as currently there ? I have a doubt ! Thanks

Hi Alex, Sorry to come back but nothing resolves my issue: Deleted the former instal and install again LNMap in a different path (under C:) The same message pops up... I am desperate 😞

Hi, Sorry to shake this old topic but I wanted to relate to the above post to expose my own issue, exactly the same. I did check that Redistributable packageis installed and found actually Microsoft Visual C++ 2017 (x64) Redistributable is installed.as well as Microsoft Visual C++ 2015 (x86) Redistributable My configuration is running LNMap on my main computer (W10) with P3Dv4 and the client on another computer. That was working in the past but recently, I got the same MSVCR120.DLL message. I also checked that the dll was in place, which it is ! Could you help me solving that ? Thanks

Hi guys, I fly Phenom 300 with Navigraph extension. I do fill flight plan starting by selecting the departure and the SID. Then the arrival including a STAR before entering all WP of the route. So far everything is OK. Until the controller assigns me a different STAR. I tried to delete the existing arrival procedures but when I add a new arrival where my cursor is located on the airfield of arrival, all points are merged within the route and my route looks like a sparkling star... i could not find anywhere on the web any tutorial to change the STAR inflight (could also be needed on the ground while preparing the flight....) I am keen to be explained thanks in advance Thanks for your help Bruno P3D v4.3, W10-64

New episode of my saga: so far convinced that it is a Java issue, I tried to install a new instance of the program. When launching the program from the inside exe file, I get this message: What to do with this when I confirm to have the latest Java 1.8.1 installed 😞

Me again... continuing I just noticed that Java was updated on 17-07-2018, corresponding more or less the the day when my problems started. So I have udpade Java to the latest version 181, full of expectation :) But no change, still the same issue Anyone else with the same situation ?

Hello I have tried again today and observed the log file and these are the errors mentionned (I do understand nothing !) These are just extract in order to let you know the kind of records that are displayed in the report. If you need the full log, I can forward it in MP.

Hello, I hope I can get assistance for my issue with VfrFlight which ask me to wait, wait and wait... It is not link to my simulator (P3Dv4.1) and it was working fine until yesterday. But, with no apparent reason, it now decided to stop working !!! Any possible reason ? No new software was installed and it is mostly used in standalone mode Thanks in advance Bruno

I just tried but that is not working... Did someone succeded?

Thanks Ken, I will try your method... and also the Bert's one as I am P3D user. But as you said in an earlier post, not sure that all these manipulations worth for such a small issue ! I will see. Anyway thanks for your assistance. Cheers Bruino

Hi Ken, I did not receive any notification to inform me that you replied... Sorry for being late ! Thanks for the investigation.. I have done the modification for Feb (see below) but I don't know how to import it in the CAB file... Impossible from the 7zip app... Any idea? To upload a screenshot here, first save you pix onto a server (I use ShareX myself) and include the image address in your post... as simple as that ;) Regards Bruno