braudoux

Thanks Ken, Another project that would include an automatic update of the graphic based on the current AIRAC... Not that makes sense We can fly as it...

Hi ******* and Ken, Thanks for your replies. While launching the aircraft, I did get the message stating that Navigraph datbase is being updated. Then I followed your path, Ken, and effectively the Navigraph update is OK. But I still don't understand why the main page still shows the date 2016 for the DB status ! Do you have the same situation? Thanks again and happy new year Bruno

Hi guys, How to notice if the extension is properly installed... I see no difference in the MFD which shows a Database expiring on 30-MAR-2016 despite my latest update to AIRAC 1713 I have a Navigraph yearly subscription. So I am not quite sure if the install was successful or maybe I forgot to declare it somewhere ! Thanks for your help Bruno P3D v4.1 , W10-64

It is now confirmed that it is an EZDok issue. Subject closed

Hi guys, Popping up in this post for a simple question... How to notice if the extension is properly installed... I see no difference in the MFD which shows a Database expiring on 30-MAR-2016 despite my latest update to AIRAC 1713... Also I am not having the NORMAL checklist. So I am not quite sure if the install was successful or maybe I forgot to declare it somewhere ! Thanks for your help Bruno

Hi Guys, It looks like this is not a G1000 problem but an EZDOK issue. I posted there and am waiting for a reply. Let you know and will close the post. Bruno

Hi, I've been searching through the forum and more widely in Internet unsuccessfully... I just got the Carenado Phenomm 300 and purchased meanwhile the Navigraph extension. While launching my session after having chosen my aircraft, I have this message Did anyone get the same? Obviously the extension doesnt recognise my AIRAC 1713 ! Thanks in advance

Hi guys, First of all, I'd like to thank all participants for this thread... I could fly just by reading all suggestions... Unable to steer with my Alabeo DA40 with the P3D V4.1 sim, I googled and found, thant to you, that EZDOK was responsible for that situation. I remove the fuselage shaking and done... Bruno

My fingers did their best, I can guarantee... I have respected the explanations given in the video, going slowly and surely, no issue while proceeding and at the end......... no change, exactly the same behavior of my throttle 1... :Shame On You: I give up and will try to keep using as it until I receive my new throttle that I will order in the coming days. Thanks again Phil for your help!

Thanks Phil... I will try your fix, should my fingers allow Once this done, and if unsuccessful, I will also buy another quadrant... What did you buy ? I am considering the GoFlight GF-TQ6 I'll post here the result of my trial Bruno

Hi Guys I am facing an identified but rarely resolved issue with my Saitek Quadrant: the engine throttle 1 cannot be set properly... I have visited many forums and could fine similar problem experienced by other :simfans". I have therefore applied the differents actions suggested such as: verified the possibility of having multiple assignments for the same control: no duplicate calibrated the throttles through Windows, taking care of the dead zones: nothing unusual, no dead zone set calibrated the same through FSX: no issue applied the method "macwino" described in a post on SimFlight forum (topic 73846) consisting in deleting folders in Windows Registry...no impact Then applid the method "Tutdoc" from the same post... unsuccessful! What happens: while moving slightly the 2 throttles of my Saitek quadrant, the engine throttle 1 on FSX pedestal (VC) jumps forward at mid course (Image 1) Then from the position reached on the pedestal, any movement forward of the quadrant throttle doesn't have any effect until the quadrant throttle reaches the medium position, At this moment the throttle of the VC pedestal jumps to full poser (Image 2) The image 3 shows the situation after I have aligned the 3 quadrant throttles to the throttle #1, in reference to the VC throttles. I don't know if I have fully investigated... I am suspecting a hardware problem, but I would like to have your feeling and expect that someone could help me. Thanks in advance Bruno NOTE: I cannot upload images... the dialog box to load the URL gets stuck I will upload them later if I understand how to proceed Windows 7-64 / 16Mb RAM / I7 3770 / SSD256 + 2To HDD / GTX660 / NVidia Surround over 3X29inch FSX SP2, FSUIPC registered, Captain Sim B707 and C130 airplanes (4-engine) SAITEK- Yoke ProFlight System, additional Throttle Quadrant, Rudder pedals, Multi Panel

Thanks for the post, I am downloading it and will try !

Problem solved ... After deleting the scenery Florida input in my scenery.cfg file, FSX is back... There was something wrong with my install. Cheers Bruno

Hi Jim I am experiencing a starting problem with my FSX. After having visited forums, I have already excluded the logbook possible issue, and tried as you advised : rename fsx.cfg and let the program rebuild it. It did id but still the process remains stuck in the early loading stage (according to "Ressource Monitor"). What I did before I discovered that: 1- I deleted a scene in the Scenery library. 2. I run succesfully FSX because I wanted to verify the correct uninstal prior to reinstalling a new scenery instead. 3- I installed the new scenery (MegasceneryWorld Florida). After that, impossible to relaunch FSX... I might have done something wrong, but as it is not the first time that I do proceed to such actions, I really have no idea !!! Do you have any idea yourself? A direction for investigations? I would really like not to reinstyall everything as I am having a lot of add-ons... What about Repair ? Thanks for you help Bruno

Hi guys, I've got the solution to my typical problem ... and that could help the other "victims": Indeed I am also using EZDok software that requires to be reconfigured any time a new aircraft is added into the hangar. Once EZDok re-configured, my B737 series 600 and 700 retrieved its skin . That was my brick in the wall !

Hi all, I am having this skeleton problem right now with any livery for 736 and 737, even the home PMDG liveries... But if I load any livery of the 738 serie, I have no issue... Did this happen to anyone? I'd like to fly the Europe Airpost B737, but the external views are definitely not working. Thanks

Bonjour les Pros, Je vole sur FSX / EMB175 de FeelThere. Bonne bete ! En voulant configurer tous mes accessoires (Saitek, Thrustmaster), j'ai installe Linda car je trouve FSUIPC tres rebarbatif (sorry Pete, but you already know ;-) Voila ce qui m'arrive donc, et deux jours de galere me conduisent finalement vers vous: lorsque je selectionne {Views/View Mode/Cockpit/Cokpit} depuis le menu FSX ou bien par l'intermediaire de mon MFD Cougar, je devrais (et c'etait le cas avant) voir ma scene en background et mon main panel superpose au premier plan. Seulement voila, a ce jour je ne vois que la scene et pas de main panel... Si je fais un click droit, cependant, et je j'"undock" le main panel, il apparait mais la partie vitree est noire au lieu de laisser voir le decor. De plus, lorsque je veux montrer les panel instruments (il y en 8), le meme probleme se presente et je dois les "undocker" pour les voir... C'est pas vraiment le pied! Si quelqu'un a deja eu a faire face a ce genre de gag "bouffe-temps", je suis preneur d'une solution et d'une explication! Merci d'avance Bruno

Salut le Titanic, Oui je sais mais je n'ai pas trouve le lien de ton site par Google... Merci,tu es un geant! A pls

Bonjour a tous, Je reveille ce topic car je suis a la recherche de la scene de GOOY de Jean Charbonel mais le lien n'est plus actif... :rolleyes: Est-ce que quelqu'un peut me dire ou je peux la recuperer? J'ai reussi a degotter la scene de Dakar ville, mais pas l'aeroport :wub: Merci d'avance