warning23

Nope, stock p3dv4 If i go to the flight planner in p3dv4 it shows the old frequencies but if i run the BGLfacilityscanner it says i should be having the new correct ones you mentiones. Weird and annoying now i have to check every destination beforehand to make sure the correct ils´s are in place.

Ive run the installers from : https://www.aero.sors.fr/navaids3.html But EETN ILS´s dont seem to be updating They should be 108.3 and 109.3 but they dont work In the p3dv4 own flight planner it states the frequencies as 111.7 and 110.3 which actually work but these are from 2006 I´ve run BGLfacilityscanner.exe and it tells me the freqs should be 108.3 and 109.3 leading me to : C:\Lockheed Martin\Prepar3d V4\Scenery\0601\scenery\APX54100.bgl Which does actually exist Is anyone having the same problem? Thanks.

https://www.aero.sors.fr/navint.html The addon scenery folder doesnt exist. What should i do now?

After some testing i disconnected one of the monitors, loaded the flight, changed to windowed mode and closed. Connected the 5 th display ( 7th monitor ) and it does run in windowed mode. But again running in windowed mode is like running P3D and i loose the ability of stacking 2d panels on top of each other

https://www.flightsim.com/vbfs/showthread.php?284573-FSX-will-not-continue-to-run-when-a-5th-monitor-is-added In this topic this guy claims a 5th monitor is not possible. I can run fsx but when loading a flight it crashes even though fsx in settings detects fine all 5 displays numbered 0.1.2.3.4 Would be a shame if true. I really dont want to go p3d and start with the undocking stuff.

My primary card which is an nvidia is running 4 cards in 3+1 setup. And the secondary card is running the other three displays. Do you mean i should run the secondary card also in a suurround setup even though ive only connected three displays?? I dont think that is the issue though, xplane works fine and im sure p3d will work fine also.

Hi there, so far ive had a setup with a single PC running FSX:SE with 6 monitors no problem. 3 of them in Nvidia surround and the other three for pedestal, main panel and overhead. i wanted to add a 7 th monitor for my dad with his own instruments and FSX keeps crashing every time i load a flight. Connections are: nvidia surround monitors 3x1680x1050 dvi-d to dp in main graphics card Overhead panel 1680x1050 dvi-d to hdmi in main graphics card. So that is 4 displays on 1 card main panel 1680x1050 monitor vga to vga+dvi-i adapater tosecondary card main panel 1680x1050 monitor dvi-d to dvi-d to secondary card pedestal panel 1050x1680 ( yes portrait mode ) dvi-d to hdmi to secondary card 3 displays on the other card Windows runs perfectly. At first i thought the problem was the portrait mode but it isnt, its the 7th monitor whichever it is. If i unplug any of the monitors FSX doesnt crash. ANy ideas before i give up ? I dont hink im ready to move to p3d and loose docked 2d panel ability. Ive tried p3d before and sometimes i need 2d panels on top of each other and undocking these in P3d´s non true full screen doesnt support this feature.

So i run three monitors at 5040x1050 resolution. The 2d panels are distorted and get the flashing cursor thing with the main panel. I can solve this for addon aircraft like pmdg by editiing the panel.cfg. BUT this solution doesnt work for default aircraft. What am i missing?? I even tried downloading the 2d panel fixers from this website to no avail and im starting to be desperate since i dont want to install fsx non steam edition again.

The aerosoft x might be pretty on the outside but it is nothing but a busty blonde with no substance. Until flightsimlabs is released i need an a320 that has 2d panels and the flight model and handling is accurate, and in fact the wilco a320 is superior in that to the aerosoft one which doesnt even have 2d panels. In any case thanks for the suggestion.

Was wondering if any of you guys have come across these issues: 2D PEDESTAL RADAR CRASHING FSX:SE: When Turning on the pedestal, a test goes on in the ND, after it finishes the sandclock from windows appear and fsx crashes. http://www.flightsim.com/vbfs/showthread.php?300418-Airbus-is-now-crashing-my-FSX-with-no-error-reported/page2 Dont know what he refers to with this: FMS VOR AUTOTUNNING: When setting manually vor1 in rad nav page it will still autotune closest VOR when thrust levers are manually advanced to FLEX/TOGA. Making impossible to fly a raw data sid with VOR´S other than the closest one. Also when changing from FLEX/TOGA to CL it will AGAIN autotune to closest VOR.

Hi there, i was thinking about using the tablet as the radio pedestal and been trying fsradiopanel https://play.google.com/store/apps/details?id=com.tambucho.fsradiopanel&hl=es which works pretty well with stock planes. But with PMDG doesnt. Anyone knows how to make this applet work with the 737ngx?? Thanks. Or any other applet for radios in tablet?? i was thinking about saitek radio panel but the knob problem seems to be a big one

I decided to install both updates in a clean no more addons fsx boxed version in another computer AND initally i had the same problem, when AS16 IS running fs force doesnt work correctly. Then i decided to install the hotfiz update 2 and now it works in that computer. So i went to this one which is a fsx:Se premium edition and after the hot fix update it still has erratic behaviour. Tomorrow a new motherboard is coming since this one has a ram slot broken and i will format the entire pc and install from 0 and see how it goes. If you guys have any more ideas please let me know.

So thats that. Ive been having some trouble with these two magnificent addon. When as16 is running trimming with the hat switch wont work properly. if i restart fsforce or connect/discconect usb sidewinder ff2 it weill beave erratically and i will loose hat switch trimming along trim feeling but ill have spring centering. If i start fsx without as16 fs force 2 will work properly. Im thinking it may be something with simconnect due to log file: FSF_HDW_VERIFY received by EXE. Result=-1 Error in routine AirEffect.Load[1] : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine AirEffect.Load[2] : : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine MechanicalEffects.Init[1] : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine MechanicalEffects.Init[2] : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine LandingBump.Init1 : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine LandingBump.Init2 : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine LandingBump.Init3 : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine MechanicalEffects.UpdateForces1 : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine AirEffect.ProgramForces (1) : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine MechanicalEffects.UpdateForces1 : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine AirEffect.ProgramForces (1) : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Error in routine AirEffect.ProgramForces (1) : DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. Application name : Microsoft Flight Simulator X Application version : 10.0.62615.0 SimConnect Version : 10.0.62615.0 Interface Version : 4 Anyone else with same problem?? Wrote an email to fs force support but no answer yet, cant log to their forums. Should i try hifi forums??

EZDOK has screwed me over, seems like in fact you dont need to add lines with the new version. Still testing-

Hi there, i was trying ezdok for the first time and it has messed up my hat switch configuration on my joysticks. The shaky effects on landing, takeoff, flying, turbulence and ground roll are very cool though. I was wondering if there is way of installing this ezdok effects without all the binding and crap. I d ont need EZDOKS main purpose which i guess is camera placement since i have a multimonitor setup with 6 screens. I just need the shaking effects

Hi Mate, the test tool like vortex told you is in the fs force web, its free. I believe what You are talking about fsx default force feedback, forget that. I would suggest you try out the program and add the line i posted above to be able to use the hat switch as a trimmer and feel that elevator movement., see below. I think its the best addon but to each his own, people say multimonitor simmers like me should be killed and 2d panels should be banned forever so everyone has an opinion. [General] TrimClickAmount=100 TrimIndicator=1 PauseOnTaskSwitch=0 dwStartDelay=1 PMWndPos=2141,373 JoystickTrimUp=Joystick:0:POV:0:18000 JoystickTrimDown=Joystick:0:POV:0:0 be aware to go to windows panel control device manager and make sure your joystick order, mine is joystick 0. Hence the 0 in the code line but it can look like this: [General] TrimClickAmount=100 TrimIndicator=1 PauseOnTaskSwitch=0 dwStartDelay=1 PMWndPos=2141,373 JoystickTrimUp=Joystick:1:POV:0:18000 JoystickTrimDown=Joystick:1:POV:0:0 With this line and trim set to fs force i use the hat switch and feel the tilting joystick simulating an elevator going forward or aft. When i use the PMDG i have a custom profile that i use the trim setting of fsx with buttons 3 and 4 [PMDG] ID=Profile AileronForcePoints=0,0,0,71,0,71,443,71,447,101 ElevatorForcePoints=0,0,0,57,0,57,159,57,340,100 ElevatorWeight=10 GroundOps=Complex vibs AileronFriction=50 AileronDamping=20 ElevatorFriction=50 ElevatorDamping=20 MechanicalCutoff=500 LandingTransition=-300 LandingHardBase=60 LandingMaxForce=-500 LandingMinForce=30 LandingWingsLevel=5 BrakeStrength=50 BrakeVibrationPeriod=80 BrakeVibrationStrength=17 BrakeVibrationDirection=75 BrakeVibrationStartRamp=90 BrakeVibrationEndRamp=70 GearThumpMagnitude=30 GearThumpPeriod=350 GearBuffetDuration=-1 GearBuffetMinForce=5 GearBuffetForce=20 GearBuffetBasePeriod=140 GearBuffetModulatingPeriod=600 GroundOpsGain=1.5 UseN1=1 CorneringMultiplier=20 TrimSystem=0 In this case "TrimSystem=0" means fs force will use fsx trimming. Which in this instance i trim with buttons 3 and 4 and i can use the hat switch for the pan view. In this case the 737 has a centering but you still feel some forces simulated to be able to properly trim like the real plane with hydraulics controls and a yoke centering due to trimming a big stabilizer. So in summary: Ga aircraft trims a tab.... you feel the yoke moving aft and forward. TrimSystem=1 will use fs force trim system and with the line code above i will use the hat switch- 737 and the like, trims an stabilizer... hydrualic centering with some feel. TrimSystem=0 will use fsx trim system and i will use buttons 3 and 4. If any of you guys think im doing something wrong please do tell me.

woops, was messing with fsforce.cfg and forgot this line: JoystickTrimUp=Joystick:1:POV:0:18000JoystickTrimDown=Joystick:1:POV:0:0 Now the tilting joystick will be fine with the hat switch. What i dont have though is the trim window,

Well im using A force feedback joystick, that may be the reason. How do you have your in game fsx realism settings?

So ive been playing well enough with this fantastic addon + joystick and suddenly i cant feel the yoke movement when i trim I can feel bumps, the test in profile seems fine and the test tool in the web seems ok also. What can be the problem. I mainly use the 737 so in theory this is no problem but today i wanted to fly the baron and the joystick wasnt tilting aft when i trimmed up. I wanna know if there is something wrong with my joystick or my pc software. I tried registering in the official forums but they wont send the activation email. Thanks.

Hi there, since installing accu-feel i feel the airplanes heavier, specially upon touchdown. In any case i was wondering how i should set the in game fsx realism settingss and if this despite whatever you select are overridden by accu-feel. Many thanks.

I know, but this sabertooth has decent rating. In fact i tried doing what you did but very few z 170 motherboards in newegg have a decent enough rating. And the one sthat have have too few reviews

Made sure the ram is qvl, im chaning the ram but im pretty sure its the mobo. The PSU is obviously not the issue as i suspected and im googling Z170 cold boot problems and there is definitely a trend so not what you are saying Harold.

The Sabertooth Mark 1 is failing to boot on cold in the morning. Doesnt save the xmp settings and i need to press the memtest button. Second z170 board that is giving me problems. The first one bein an ASUS z170 pro gaming. I will change the psu, and ultimately try another sabertooth if needed. If it still doesnt work properly im giving up on skylake all together and waiting for the next platform whcih hopefully will be more stable. This hardware is a POS

Im changing rigs recently and it would be very convenient to have this addon automatically installed everytime i format and change hardware. Thanks.

So just recently purchased fsx:se and im really digging having all the addons on steam and being installed automatically when i change rigs. Any plans for hifi to have as16 like they have asn? Im holding on buying as16 because its clearly a better produt tan ASN, but it is not in steam. ( PUN INTENDED )