Sekkha
Members-
Content Count
161 -
Donations
$0.00 -
Joined
-
Last visited
Content Type
Profiles
Forums
AVSIM
Media Demo
Downloads
Gallery
Blogs
Forms
Everything posted by Sekkha
-
Vnav Early Descent within 50 NM of TOD - 744
Sekkha replied to Sekkha's topic in PMDG 747 Queen of the Skies II
Not the -8.....its about the 744 My throttles are Ok. When reaching TOD in cruise thrust goes to IDLE as it should. Not in early descent however.... -
Vnav Early Descent within 50 NM of TOD - 744
Sekkha posted a topic in PMDG 747 Queen of the Skies II
Hi all, I was wondering if I just remember wrongly or if it is not working correctly: When on a Vnav Early Descent (started within 50NM of TOD) upon capturing the Idle descent path the AP pitch mode changes to VNAV PATH as expected. However the Thrust mode stays in HOLD letting the speed build up. I was expecting an automatic switch to IDLE followed by HOLD. I saw that 2 times now since the latest update....So not sure, if this is supposed to be like this ? thanks for any clarification -
Deceleration rate provided by Autobrake
Sekkha replied to Sekkha's topic in PMDG 747 Queen of the Skies II
Thanks Dan , I know that reverse thrust is most effective at high speeds . So the overall result is not fully realistic due to sim limitations. Thats exactly what I thought... of course I refer to landing rollout with AB 1-3 -
Apologize if that has been discussed already some time ago.. As far as I understand Autobrake provides for a certain deceleration rate taking into account the usage of reverses. That means that the deceleration rate will be the same with or without reversers, the reversers thus mainly helping to reduce wear on brakes ... At least on a dry runway with normal braking action I suppose Am I right that this is currently not modelled in the PMDG 744? (At least some tests I just did suggest that as the stopway with reversers using the same autobrake level is significantly shorter than without reversers) I can imagine that to be something quite complex in the given P3D environment though...
-
As far as I understand by using derates in certain conditions TOW can be even INCREASED due to the possibility of choosing lower V1 (due to lower VMCG)
-
-8 nose pitching up on the takeoff roll
Sekkha replied to Nighthwk's topic in PMDG 747 Queen of the Skies II
Ok, will do that later -
-8 nose pitching up on the takeoff roll
Sekkha replied to Nighthwk's topic in PMDG 747 Queen of the Skies II
Thanks Dan...so that is about 12 knots above what I have experienced...quite some difference actually....very strange I will try some more scenarios and also how much I would have to trim down to get the same result as you did.... -
-8 nose pitching up on the takeoff roll
Sekkha replied to Nighthwk's topic in PMDG 747 Queen of the Skies II
Dan, if you dont intervene at all, will it start rotating allone anytime after Vr? If yes, at which speed? Would be interesting to know if its just a matter of some knots or if it doesnt rotate allone until quite highr speeds... also PD3v4.3 btw -
-8 nose pitching up on the takeoff roll
Sekkha replied to Nighthwk's topic in PMDG 747 Queen of the Skies II
To ammend that: I just tried the scenario again. Same result. Rotation started 1-2 knots before VR without any intervention ZFW was 518.6 FUEL LOAD (set by directly entering the amount , not by ground operations): TOTAL 338,0 --> Center 81,4 / Main 2+3 83,5 / Main 1+4 29,3 / Res 2+3 8,9 / Stab 13,2 PAX GE variant -
Hi Bryan, I am a bit confused now. I already opened a ticket yesterday and already got some answers to it (ticket number: 4049): Strangely I got some answers by email stating that PMDG said that " RAAS was working in the -8" !! I dont have the -8, I am talking only about the 747-400 BCF and F models best regads
-
-8 nose pitching up on the takeoff roll
Sekkha replied to Nighthwk's topic in PMDG 747 Queen of the Skies II
My calibration is definiteley fine, I always calibrate controls before each flight It rotated until liftoff, I allowed it to do so in order to see what happened (it was a nice rotation rate just as if I had done it manually :) ....NO BOUNCING.. its was ROTATING cant remember nor define the exact speed, maybe 2-3 knots before... exactly this Never had this behaviour before the update. And I did quite a lot of flights, believe me :) -
-8 nose pitching up on the takeoff roll
Sekkha replied to Nighthwk's topic in PMDG 747 Queen of the Skies II
I experienced the same behaviour with the 744, never saw that before the recent major update.. TOW was around 856000 (payload set by RANDOM function) / Flaps 20 / TO 1 derate / CG 22,6 / Trim settings 6,7 and Vspeeds as suggested by FMC (and except for V1 identical to those suggested by topcat) : Vr = 170 Aircraft startet rotating on its own some knots before reaching Vr..... -
Thanks Bryan, I will happily do that. Could you send me a link to where to do it please (EDIT:disregard, I havent seen it below).. But just in case: I will paste all dll.xml I have, maybe there is something wrong and I can fix it easily myself: the one in P3D main directory RAASPRO/Res looks like this: <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>RAASPRO</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>.\RAASPRO\RAASPRO.dll</Path> <DllStartName>module_init</DllStartName> <DllStopName>module_deinit</DllStopName> </Launch.Addon> </SimBase.Document> The one in Programm data looks like this: <?xml version="1.0" encoding="UTF-8"?> <SimBase.Document Type="AceXML" version="3,0" id="dll"> <Descr>AceXML Document</Descr> <Filename>dll.xml</Filename> <Launch.Addon> <Name>PMDG_Interface</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDG_Interface.dll</Path> <DllStartName>module_init</DllStartName> <DllStopName>module_deinit</DllStopName> </Launch.Addon> <Launch.Addon> <Name>RAASPRO</Name> <Disabled>False</Disabled> <Path>.\RAASPRO\RAASPRO.dll</Path> <DllStartName>module_init</DllStartName> <DllStopName>module_deinit</DllStopName> </Launch.Addon> </SimBase.Document> (and the one in roaming P3D , which probably isnt intefering here) looks like that: <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>FSUIPC 5</Name> <Disabled>False</Disabled> <Path>C:\P3D V4\Modules\FSUIPC5.dll</Path> </Launch.Addon> <Launch.Addon> <Name>FSTramp</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>C:\Program Files (x86)\FSTramp\FSTrampX.dll</Path> </Launch.Addon> <Launch.Addon> <Name>as_connect</Name> <Disabled>False</Disabled> <Path>as_srv\as_connect_64.dll</Path> </Launch.Addon> </SimBase.Document> best regards
-
SQUIB TEST buttons - clickspots 744 BCF
Sekkha replied to Sekkha's topic in PMDG 747 Queen of the Skies II
Ok, done -
RAAS not initiating on F and BCF models , upd.744 P3DV4.3
Sekkha replied to Sekkha's topic in PMDG 747 Queen of the Skies II
Ok, done -
RAAS not initiating on F and BCF models , upd.744 P3DV4.3
Sekkha replied to Sekkha's topic in PMDG 747 Queen of the Skies II
Please apologize if I bring this topic up again.... I also brought that up in the FS2CREW support forum (where I suppose it rather belongs to) and Bryan told me some days ago that he tried to contact PMDG in regard of that but didnt get any response yet. I meanwhile made another attempt installing everything from scratch. I ran the RAAS uninstaller, I uninstalled the PMDG 744 and also Aerosoft Airbus, I cleared all leftover folders from RAAS. Then I installed the PMDG again from scratch...Same result: No RAAS in those models (BFC and F), but working in PAX and ERF I installed Aerosoft Airbus and RAAS is working there, too So I really dont know what else to try. Would it be possible that somone from PMDG could give a statement about that. Is it clearly a FS2CEW issue? Or do I need to file a PMDG support ticket ? No hurry to solve it, but would be great to just know that somebody is looking at it ...thanks in advance -
Just another little observation: I noticed that the SQUIB TEST buttons for CARGO AFT and FWD in the BCF-model dont work - there seem to be no clickspots anymore since the last mayor update. However there are two clickspots directly over the IRS ON BATT light and slightly above which act on the ENGINE SQUIB TEST buttons...I suppose that should not be that way ? I didnt check in other models...
-
Not needed anymore with the latest version 4.86. Just make sure that you run it as administrator...
-
hmmm...not a lot of feedback unfortunately. I meanwhile made another attempt installing everything from scratch. I ran the RAAS uninstaller, I uninstalled the PMDG 744 and also Aerosoft Airbus, I cleared all leftover folders from RAAS. Then I installed the PMDG again from scratch...Same result: No RAAS in those models I installed Airbus and RAAS is working there again So now what to do ??? :)
-
I posted that also in the PMDG forum - with not much feedback actually...There seem to be some people which are having problems with RAAS since the last updated (which was a required full install, and I tried it already twice) But I didnt get any response from anyone to my suggest to also try if it is model-related as in my case.........
-
Hi all, since the last mayor update to the PMDG 744 I am having a problem with RAAS (the restricted version). The module is not loading (not appearing in the P3D menu) for BFC and F model. However it is loading and working for PAX and ERF models... (BTW it also loads and works with Aerosoft Airbus A319) In ALL models the option in the aircraft RAAS INSTALLED is set to YES !! What could be the problem here? Any help would be highly appreciated ! best regards
-
[25SEP18] We are cooking an update for you...
Sekkha replied to rsrandazzo's topic in PMDG General Forum
Those steps will unfortunately not help if you have the same problem I have (and which appeared with the latest update to 744): Maybe you can check if you have RAAS working in other models than the one you normally use... maybe the option "RAAS INSTALLED= YES" is getting ignored in some models. -
RAAS not initiating on F and BCF models , upd.744 P3DV4.3
Sekkha replied to Sekkha's topic in PMDG 747 Queen of the Skies II
Thanks Dan, just to avoid missunderstanding. I am talking about the restricted version of RAAS which came with the 744 (and also with Aerosoft Airbus for example). So this one I suppose should and will only load for the aircrafts it is restricted to, doesnt it? The dll.xml entries are there (I am using P3D V4.3) , and it also gets loaded and is working perfectly for PAX and ERF models of the 744. The question is why isnt it loading for F and BCF models also ...? So , could that be something in the model files which might be wrong ?