SMN204

How many times can the license be renewed when replacing the motherboard? Am I understanding that this is not limited - correct ?

It’s clear that if you’re choosing between the 7800X3D and the 14700K from the start, Ryzen is obviously preferable! That’s not up for discussion. What I’m talking about is that I want to get min stable 25–30 FPS on my three 1440p monitors with an RTX 4070, while spending as little as possible. So the question is roughly this: Is $900 (go to AM5 with a 7800X3D) vs $500 (stay on the Intel 14700K) equivalent to the benefit I would get? The prices listed are what I can actually buy them for right now. So I’m leaning toward the 14700 in my particular situation.

I have i5-10600K (overclocked) + 32 GB DDR4 + RTX 4070. Output to three monitors, each 2560×1440. In many 3D scenarios FPS is dropped to 15-20 and almost always shows “Limited by mainthread”! I want to upgrade the CPU. I’m considering two options: 1. Intel i7-14700K with old my DDR4 (need new CPU + motherboard) 2. Ryzen 7 7800X3D (need new CPU + motherboard + DDR5) Option 2 would be better, but it’s twice as expensive because I would need to buy DDR5 (and it’s very expensive right now). Which option would you recommend? And what kind of fps increase will I get in these options, approximately?

Why, when I select “Show Only Add-on airports,” does the map display airports that I don't have in my Community folder? Or should all airports from “Packages\Official” be displayed?

Only Export Flight Plan as on screen (.pln) - opens in GTN750

- Black Square - Baron Professional - All PFs (example in my video PADU-PAUT - GTN-750 Add-on 2.2.45 Here Video

MSFS2024 Little Navmap 3.0.16 64 bit Export Flight Plan as MSFS2024 - does not open in GTN750 Export Flight Plan as MSFS2020 - open in GTN750 !

Is it normal that in MSFS2024 3D airports are not highlighted in yellow color like in MSFS2020 ?

How do I change the path "Flight Simulator Base Path" here? My Packages folder is not in the default location!

I have compared the quality of TAA and DLAA many times at my place I have noticeably better clarity with TAA! Here is an example of TAA and DLAA (everything else is the same!)

I downloaded and launched NVPI normally

NvidiaProfileInspectorRevamped And just download the files from techpowerup.com -nvngx_dlss_310.2 - nvngx_dlssg_310.2. Replace them manually (.....Steam\steamapps\common\MicrosoftFlightSimulator) and using the new “NvidiaProfileInspectorRevamped” enable functions ? Is this enough ?

I got the BS KingAir in 2024! Thanks for the tip!

I'm not on SU1 beta. I'm on stable version 1.2.11. I copied the folder “Analog King Air 350i - Black Square” from Community MSFS2020 to the folder Community MSFS2024 I copied it here... Oh... I didn't copy the King Air (Asobo) folder into your MSFS2024\Official202020!!! 🤔 That must be the problem... I'll try it soon

It won't start Black square King Air in 2024 now. After pressing - FLY... constant loading of the flight. Probably after MS2024 updates

What about Intel? For example: Is i5-10600K (4.1 GHz) far behind in MSFS from i9-10900K (3.7 GHz)...?

Yes, I'm using AutoFps. Works for me! For fps 25 on the ground in complex scenarios, it's OLOD-50 and TLOD-50. In flight, OLOD to 400 and TLOD to 100

I don't use DLSS. Tried it - didn't like it... I think that with native fps less than 30, DLSS worsens the picture, blurs everything when moving and leaves noticeable “tails” Uh, actually. I have an average of 22..25 fps in airports on the ground and 30...35 in flight

P.S I have 3 monitors 2560 x 1440, all screenshots are when running 3 monitors....

And which memory (DDR4) would be the best choice in my situation? i5-10600k (5GHz) + MSI MPG Z490

I have a DDR4 3200. 32GB. Is that the reason?

In that case, it's only the speed of the processor in single-core mode that matters, not multi-core mode? And a CPU with a higher frequency on one core is preferable to a multi-core CPU with a lower frequency of cores?

No, overclocked to 5.0 😃 I don't know why the number in the manager is 6.05.....

Why when “Limited by MainThread” I see in the task manager that CPU cores is not 100% utilized ?

Please explain me why I see (1707 x 1365), (1920 x 1563) in DL Scaling DSR settings ? And what do these numbers mean ? My native monitor resolution = 2560 x 1440 !