Hi.I used rc4 for a long time last year on this system without any issues. After not doing much simming for a while i recently set down to do a flight and had some troubles with rc4 showing errors when i first started it up. unfortunately i didn't write these down, but rather decided to do a fresh reinstall, also putting it on a new secondary drive and re-registering etc.unfortunately, now when i run the app, it starts up ok, but as soon as i load a flight plan it shows the following error "Run-time error '7':Out of memory". it seems to happen when importing any .pln file i've tried.i'm pretty sure i have enough memory (task manager shows around 5 gigs unused)..it used to work fine with fsx and everything running..system is windows7 64-bit. i don't know if it matters but it's fsuipc 4.664, makerwys 4.41 (ran clean with no errors), rc4 version 4.3.3845, run in administrator mode..thanks for any advice for diagnosing this issue.cheers,-andy crsoby

=====================================LOG FILE==================================================debug onRC Version 4.3.3845   June  6, 2006D:\rcv4x\rcv4.exe<fs2kplanner> C:\Users\Andrew\Documents\Flight Simulator X Files\IFR Austin Straubel Intl to Oakland Co Intl.PLN=================================================================================================================================================================================<?xml version="1.0" encoding="UTF-8"?><SimBase.Document Type="AceXML" version="1,0">    <Descr>AceXML Document</Descr>    <FlightPlan.FlightPlan>        <Title>KGRB to KPTK</Title>        <FPType>IFR</FPType>        <RouteType>VOR</RouteType>        <CruisingAlt>21000</CruisingAlt>        <DepartureID>KGRB</DepartureID>        <DepartureLLA>N44° 29' 32.66",W88° 7' 44.06",+000695.00</DepartureLLA>        <DestinationID>KPTK</DestinationID>        <DestinationLLA>N42° 39' 55.21",W83° 24' 37.70",+000980.00</DestinationLLA>        <Descr>KGRB, KPTK</Descr>        <DeparturePosition>PARKING 3</DeparturePosition>        <DepartureName>Austin Straubel Intl</DepartureName>        <DestinationName>Oakland Co Intl</DestinationName>        <AppVersion>            <AppVersionMajor>10</AppVersionMajor>            <AppVersionBuild>61472</AppVersionBuild>        </AppVersion>        <ATCWaypoint id="KGRB">            <ATCWaypointType>Airport</ATCWaypointType>            <WorldPosition>N44° 29' 32.66",W88° 7' 44.06",+000695.00</WorldPosition>            <ICAO>                <ICAOIdent>KGRB</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="MTW">            <ATCWaypointType>VOR</ATCWaypointType>            <WorldPosition>N44° 7' 42.58",W87° 40' 47.71",+000650.00</WorldPosition>            <ICAO>                <ICAORegion>K5</ICAORegion>                <ICAOIdent>MTW</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="HIC">            <ATCWaypointType>VOR</ATCWaypointType>            <WorldPosition>N43° 34' 29.48",W85° 42' 58.18",+000920.00</WorldPosition>            <ICAO>                <ICAORegion>K5</ICAORegion>                <ICAOIdent>HIC</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="FNT">            <ATCWaypointType>VOR</ATCWaypointType>            <WorldPosition>N42° 58' 0.37",W83° 44' 49.16",+000770.00</WorldPosition>            <ICAO>                <ICAORegion>K5</ICAORegion>                <ICAOIdent>FNT</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="PSI">            <ATCWaypointType>VOR</ATCWaypointType>            <WorldPosition>N42° 42' 3.09",W83° 31' 57.95",+001148.00</WorldPosition>            <ICAO>                <ICAORegion>K5</ICAORegion>                <ICAOIdent>PSI</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="KPTK">            <ATCWaypointType>Airport</ATCWaypointType>            <WorldPosition>N42° 39' 55.21",W83° 24' 37.70",+000980.00</WorldPosition>            <ICAO>                <ICAOIdent>KPTK</ICAOIdent>            </ICAO>        </ATCWaypoint>    </FlightPlan.FlightPlan></SimBase.Document>=================================================================================================================================================================================              <get_departure_information> KGRB              </get_departure_information> KGRB              <get_arrival_information> KPTK              </get_arrival_information> KPTK

Hi.I used rc4 for a long time last year on this system without any issues. After not doing much simming for a while i recently set down to do a flight and had some troubles with rc4 showing errors when i first started it up. unfortunately i didn't write these down, but rather decided to do a fresh reinstall, also putting it on a new secondary drive and re-registering etc.unfortunately, now when i run the app, it starts up ok, but as soon as i load a flight plan it shows the following error "Run-time error '7':Out of memory". it seems to happen when importing any .pln file i've tried.i'm pretty sure i have enough memory (task manager shows around 5 gigs unused)..it used to work fine with fsx and everything running..system is windows7 64-bit. i don't know if it matters but it's fsuipc 4.664, makerwys 4.41 (ran clean with no errors), rc4 version 4.3.3845, run in administrator mode..thanks for any advice for diagnosing this issue.cheers,-andy crsoby

=====================================LOG FILE==================================================debug onRC Version 4.3.3845   June  6, 2006D:\rcv4x\rcv4.exe<fs2kplanner> C:\Users\Andrew\Documents\Flight Simulator X Files\IFR Austin Straubel Intl to Oakland Co Intl.PLN=================================================================================================================================================================================<?xml version="1.0" encoding="UTF-8"?><SimBase.Document Type="AceXML" version="1,0">    <Descr>AceXML Document</Descr>    <FlightPlan.FlightPlan>        <Title>KGRB to KPTK</Title>        <FPType>IFR</FPType>        <RouteType>VOR</RouteType>        <CruisingAlt>21000</CruisingAlt>        <DepartureID>KGRB</DepartureID>        <DepartureLLA>N44° 29' 32.66",W88° 7' 44.06",+000695.00</DepartureLLA>        <DestinationID>KPTK</DestinationID>        <DestinationLLA>N42° 39' 55.21",W83° 24' 37.70",+000980.00</DestinationLLA>        <Descr>KGRB, KPTK</Descr>        <DeparturePosition>PARKING 3</DeparturePosition>        <DepartureName>Austin Straubel Intl</DepartureName>        <DestinationName>Oakland Co Intl</DestinationName>        <AppVersion>            <AppVersionMajor>10</AppVersionMajor>            <AppVersionBuild>61472</AppVersionBuild>        </AppVersion>        <ATCWaypoint id="KGRB">            <ATCWaypointType>Airport</ATCWaypointType>            <WorldPosition>N44° 29' 32.66",W88° 7' 44.06",+000695.00</WorldPosition>            <ICAO>                <ICAOIdent>KGRB</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="MTW">            <ATCWaypointType>VOR</ATCWaypointType>            <WorldPosition>N44° 7' 42.58",W87° 40' 47.71",+000650.00</WorldPosition>            <ICAO>                <ICAORegion>K5</ICAORegion>                <ICAOIdent>MTW</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="HIC">            <ATCWaypointType>VOR</ATCWaypointType>            <WorldPosition>N43° 34' 29.48",W85° 42' 58.18",+000920.00</WorldPosition>            <ICAO>                <ICAORegion>K5</ICAORegion>                <ICAOIdent>HIC</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="FNT">            <ATCWaypointType>VOR</ATCWaypointType>            <WorldPosition>N42° 58' 0.37",W83° 44' 49.16",+000770.00</WorldPosition>            <ICAO>                <ICAORegion>K5</ICAORegion>                <ICAOIdent>FNT</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="PSI">            <ATCWaypointType>VOR</ATCWaypointType>            <WorldPosition>N42° 42' 3.09",W83° 31' 57.95",+001148.00</WorldPosition>            <ICAO>                <ICAORegion>K5</ICAORegion>                <ICAOIdent>PSI</ICAOIdent>            </ICAO>        </ATCWaypoint>        <ATCWaypoint id="KPTK">            <ATCWaypointType>Airport</ATCWaypointType>            <WorldPosition>N42° 39' 55.21",W83° 24' 37.70",+000980.00</WorldPosition>            <ICAO>                <ICAOIdent>KPTK</ICAOIdent>            </ICAO>        </ATCWaypoint>    </FlightPlan.FlightPlan></SimBase.Document>=================================================================================================================================================================================              <get_departure_information> KGRB              </get_departure_information> KGRB              <get_arrival_information> KPTK              </get_arrival_information> KPTK

different kind of memory. there is a post pinned to the top of the forum, to pete's web site. download the latest version of makerwys.exe, install it into the root directory of fsx. grab the latest version of fsuipc, too. install it.then start rc again, click the .flt/.wx button, and make sure the path is pointing to the directory where fsx is putting the .flt and .wx files, and reading the .pln files.then click the rebuild rc scenery database button, and let it rebuild the rc databases.then try it againjd

different kind of memory. there is a post pinned to the top of the forum, to pete's web site. download the latest version of makerwys.exe, install it into the root directory of fsx. grab the latest version of fsuipc, too. install it.then start rc again, click the .flt/.wx button, and make sure the path is pointing to the directory where fsx is putting the .flt and .wx files, and reading the .pln files.then click the rebuild rc scenery database button, and let it rebuild the rc databases.then try it againjd

i tried your suggestions (i found a newer makerwys of 4.43) but it still throws the error, and log stops in same spot.for testing i also tried using an older version of fsuipc (4.60) but the error remains in both cases.is there something else i can do to help identify the issue? since it used to work, i figure it must be something to other changes i have made elsewhere..but i think the only other vb app i use is fsbuild.. i did update that to a newer version a month or two back but i'm not sure if that install would change any of the shared libs for the worse, or why a re-install of rc4 wouldn't set them back. i tried reinstalling again just to see and that didn't do anything either..thanks for the help.cheers,-andy crosby

Andy,Try one of my flight plans. It may be an issue with the format of yours. Paste this into Notepad and save as TEST_KSFOKLAX.pln and save to your Flight Simulator Files folder.[flightplan]AppVersion=9.1.40901title=KSFO to KLAXdescription=KSFO, KLAXtype=IFRroutetype=1cruising_altitude=37000departure_id=KSFO, N37* 37.14', W122* 22.49', +000013.00departure_position=28Ldestination_id=KLAX, N33* 56.55', W118* 24.48', +000124.00departure_name=San Francisco Intldestination_name=Los Angeles Intlwaypoint.0=, KSFO, , KSFO, A, N37* 37.14', W122* 22.49', +000013.00, waypoint.1=, , , Fix01, I, N37* 39.88', W122* 29.15', +000000.00, waypoint.2=, , , Fix02, I, N37* 35.47', W122* 32.50', +000000.00, waypoint.3=, , , PORTE, I, N37* 29.39', W122* 28.47', +000000.00, waypoint.4=, , , PESCA, I, N37* 16.09', W122* 19.72', +000000.00, waypoint.5=, , , Fix03, I, N37* 11.94', W122* 1.04', +000000.00, waypoint.6=, , , WAGES, I, N36* 59.46', W121* 44.22', +000000.00, waypoint.7=, , , AVE, V, N35* 38.82', W119* 58.72', +000000.00, waypoint.8=, , , FIM, V, N34* 21.40', W118* 52.88', +000000.00, waypoint.9=, , , SYMON, I, N34* 9.90', W118* 48.65', +000000.00, waypoint.10=, , , SADDE, I, N34* 2.34', W118* 45.88', +000000.00, waypoint.11=, , , SMO, V, N34* 0.62', W118* 27.40', +000000.00, waypoint.12=, , , ROMEN, I, N33* 57.86', W118* 16.68', +000000.00, waypoint.13=, KLAX, , KLAX, A, N33* 56.55', W118* 24.48', +000124.00,

different kind of memory. there is a post pinned to the top of the forum, to pete's web site. download the latest version of makerwys.exe, install it into the root directory of fsx. grab the latest version of fsuipc, too. install it.then start rc again, click the .flt/.wx button, and make sure the path is pointing to the directory where fsx is putting the .flt and .wx files, and reading the .pln files.then click the rebuild rc scenery database button, and let it rebuild the rc databases.then try it againjd

Does RC know how to read a FSX XML flightplan?DJ

Does RC know how to read a FSX XML flightplan?DJ

rc version 4.3 does.did you rebuild the rc scenery database after installing the new makerwys.exe in the root directory of fsx? don't run the makerwys.exe manually. you have to press the rebuild rc scenery database button in rcmake a log again, and send it to me. make sure you click debug before loading the .plnjd

To clarify, as soon as you load the plan into RC4 with nothing else running, it throws the error. I loaded your plan pasted from your log and it loaded OK under XP. (I don't even have FSX, just FS9, so it is reading this plan OK.) Of course my scenery database is different from yours.If that's all you are doing then FSUIPC has nothing to do with it unless you start FS and then after loading the plan you start RC.I looks like your scenery database is not correct as the plan appears to be read but stalls on getting scenery information out of RC. Under your data folder RC there are two files of interest here:r4.csv and a4.csv. r4.csv is copied froom r5.csv in your FSX folder and a4.csv is built from that. After starting the scenery database rebuild from within RC4 (and makerwys 4.41 or better is in your FSX folder) the r5.csv file in your FSX folder and your r4.csv and a4.csv files in your rcv4X folder should have current date-time attributes.Let's try this (and don't save anything):In your FSX folder with notepad or wordpad (not Excel) with word wrap off open r5.csv. Search for your KGRB. Here's what you should see roughly:KGRB,0060,44.482426,-88.138084,695,62.070,7700,109.50BDG,150,-2.200,44.487728,-88.125282,0,,KGRB,0180,44.493813,-88.133659,695,182.120,8701,0,150,-2.200,44.481880,-88.133636,500,,KGRB,0240,44.493031,-88.112480,695,242.070,7700,0,150,-2.200,44.487728,-88.125282,0,,KGRB,0360,44.469948,-88.133614,695,2.120,8701,109.90BG,150,-2.200,44.481880,-88.133636,0,,Now close that file and in your RCV4X\data folder do the same for r4.csv and it should look similar:KGRB,0060,44.482426,-88.138084,695,62.070,7700,109.50BDG,150,-2.200,44.487728,-88.125282,0,,KGRB,0180,44.493813,-88.133659,695,182.120,8701,0,150,-2.200,44.481880,-88.133636,500,,KGRB,0240,44.493031,-88.112480,695,242.070,7700,0,150,-2.200,44.487728,-88.125282,0,,KGRB,0360,44.469948,-88.133614,695,2.120,8701,109.90BG,150,-2.200,44.481880,-88.133636,0,,Close that and in that same data file open a4.csv searching for KGRB:KGRB, , 44.4848 ,-88.12946 , 2.2 , 695 , 8701Now this is FS9 but FSX scenery should give similar results. If you wish you can try your destination airport KPTK.r4.csv gives me:KPTK,0040,42.661385,-83.414131,980,47.060,2449,0,75,-6.000,42.663918,-83.411133,0,,KPTK,0091,42.666088,-83.430885,980,93.670,4992,0,100,-6.000,42.666367,-83.421585,0,,KPTK,0092,42.664650,-83.433159,980,93.660,6189,111.10BG,150,-6.000,42.664997,-83.421623,0,,KPTK,0180,42.667049,-83.408401,980,184.160,1856,0,50,-6.000,42.664505,-83.408287,0,,KPTK,0220,42.666451,-83.408134,980,227.060,2449,0,75,-6.000,42.663918,-83.411133,0,,KPTK,0271,42.665344,-83.410088,980,273.660,6189,0,150,-6.000,42.664997,-83.421623,0,,KPTK,0272,42.666645,-83.412285,980,273.670,4992,0,100,-6.000,42.666367,-83.421585,0,,KPTK,0360,42.661961,-83.408173,980,4.160,1856,0,50,-6.000,42.664505,-83.408287,0,,and a4.csv gives me:KPTK, , 42.66495 ,-83.41566 , 6 , 980 , 6189 What we have just checked is that your scenery database was correctly rebuilt. Again, my entries are from FS9 default scenery.If your rebuild did not go well then remember that there are two ways of starting RC as an admin in Win 7. The first is having a shortcut to it with the shortcut advanced properties sett to run as admin. The second is each time to right click on rcv4.exe and then choose run as admin. I don't have Win 7 but look for those security assignments. I also have seen it documented that in Win 7 turning off UAC (user access control) does NOT remove all of those restrictions unlike VISTA.Let us know how you do here with a reply.Without starting FS here's as far as I got in the debug log:debug onRC Version 4.3.3843 June 6, 2006H:\rcv4\rcv4.exe<fs2kplanner> C:\Documents and Settings\Ron Ginsberg\My Documents\Flight Simulator Files\KGRB-KPTK.pln=================================================================================================================================================================================<?xml version="1.0" encoding="UTF-8"?><SimBase.Document Type="AceXML" version="1,0"> <Descr>AceXML Document</Descr> <FlightPlan.FlightPlan> <Title>KGRB to KPTK</Title> <FPType>IFR</FPType> <RouteType>VOR</RouteType> <CruisingAlt>21000</CruisingAlt> <DepartureID>KGRB</DepartureID> <DepartureLLA>N44° 29' 32.66",W88° 7' 44.06",+000695.00</DepartureLLA> <DestinationID>KPTK</DestinationID> <DestinationLLA>N42° 39' 55.21",W83° 24' 37.70",+000980.00</DestinationLLA> <Descr>KGRB, KPTK</Descr> <DeparturePosition>PARKING 3</DeparturePosition> <DepartureName>Austin Straubel Intl</DepartureName> <DestinationName>Oakland Co Intl</DestinationName> <AppVersion> <AppVersionMajor>10</AppVersionMajor> <AppVersionBuild>61472</AppVersionBuild> </AppVersion> <ATCWaypoint id="KGRB"> <ATCWaypointType>Airport</ATCWaypointType> <WorldPosition>N44° 29' 32.66",W88° 7' 44.06",+000695.00</WorldPosition> <ICAO> <ICAOIdent>KGRB</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="MTW"> <ATCWaypointType>VOR</ATCWaypointType> <WorldPosition>N44° 7' 42.58",W87° 40' 47.71",+000650.00</WorldPosition> <ICAO> <ICAORegion>K5</ICAORegion> <ICAOIdent>MTW</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="HIC"> <ATCWaypointType>VOR</ATCWaypointType> <WorldPosition>N43° 34' 29.48",W85° 42' 58.18",+000920.00</WorldPosition> <ICAO> <ICAORegion>K5</ICAORegion> <ICAOIdent>HIC</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="FNT"> <ATCWaypointType>VOR</ATCWaypointType> <WorldPosition>N42° 58' 0.37",W83° 44' 49.16",+000770.00</WorldPosition> <ICAO> <ICAORegion>K5</ICAORegion> <ICAOIdent>FNT</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="PSI"> <ATCWaypointType>VOR</ATCWaypointType> <WorldPosition>N42° 42' 3.09",W83° 31' 57.95",+001148.00</WorldPosition> <ICAO> <ICAORegion>K5</ICAORegion> <ICAOIdent>PSI</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="KPTK"> <ATCWaypointType>Airport</ATCWaypointType> <WorldPosition>N42° 39' 55.21",W83° 24' 37.70",+000980.00</WorldPosition> <ICAO> <ICAOIdent>KPTK</ICAOIdent> </ICAO> </ATCWaypoint> </FlightPlan.FlightPlan></SimBase.Document>================================================================================================================================================================================= <get_departure_information> KGRB </get_departure_information> KGRB <get_arrival_information> KPTK </get_arrival_information> KPTKFLIGHT PLAN======================================================================================================================================================================title KGRB to KPTK filed_altitude 21000 DEPARTURE========================================================================================================================================================================ID ELEV MSA LAT LON TA TL NOTAMS NoATCSpdRst MagVar CENTER/SECTOR/FAA?KGRB 695 2600 44.4848 -88.12946 18000 0 N False 2.2 316 / 3280 /YFSS Wx Brf CD GND TWR DEP ARR UNICOM 11880 12410 12175 12190 11870 12655 11940 0 RQST RWY HD LAT LON ALT LENGTH WIDTH FREQ RADIAL Center LAT Center LON End LAT End LON 6 62.07 44.48243 -88.13808 695 7700 150 10950 60 44.48773 -88.12528 44.48245 -88.1381 18 182.12 44.49381 -88.13366 695 8701 150 0 180 44.48188 -88.13364 44.49381 -88.13364 24 242.07 44.49303 -88.11248 695 7700 150 0 240 44.48773 -88.12528 44.49301 -88.11246 36 2.12 44.46995 -88.13361 695 8701 150 10990 360 44.48188 -88.13364 44.46995 -88.13364 CENTER===========================================================================================================================================================================RVSM CENTER# SECTOR# FREQ MagVar FAA?Y 316 3280 13470 2.2 NARRIVAL==========================================================================================================================================================================ID ELEV MSA LAT LON TA TL NOTAMS HOLD ID MagVar CENTER/SECTOR/FAA?KPTK 980 2800 42.66495 -83.41566 18000 0 N PSI 6 323 / 3506 /YWx Brf GND TWR DEP ARR UNICOM 12545 12190 12370 12490 12490 0 RQST RWY HD LAT LON ALT LENGTH WIDTH FREQ RADIAL Center LAT Center LON End LAT End LON 4 47.06 42.66138 -83.41413 980 2449 75 0 41 42.66392 -83.41113 42.66138 -83.41413 9L 93.67 42.66609 -83.43089 980 4992 100 0 88 42.66637 -83.42159 42.66613 -83.43089 9R 93.66 42.66465 -83.43316 980 6189 150 11110 88 42.665 -83.42162 42.6647 -83.43316 18 184.16 42.66705 -83.4084 980 1856 50 0 178 42.66451 -83.40829 42.66705 -83.40841 22 227.06 42.66645 -83.40813 980 2449 75 0 221 42.66392 -83.41113 42.66645 -83.40813 27L 273.66 42.66534 -83.41009 980 6189 150 0 268 42.665 -83.42162 42.66529 -83.41009 27R 273.67 42.66665 -83.41228 980 4992 100 0 268 42.66637 -83.42159 42.66661 -83.41228 36 4.16 42.66196 -83.40817 980 1856 50 0 358 42.66451 -83.40829 42.66196 -83.40816 ALTERNATE========================================================================================================================================================================ID ELEV MSA LAT LON NOTAMS MagVar CENTER/SECTOR/FAA? 0 0 0 0 N 0 381 / 203 /NWx Brf GND TWR DEP ARR UNICOM 0 0 0 0 0 0 RWY HD LAT LON ALT LENGTH WIDTH FREQ RADIAL Center LAT Center LON End LAT End LONCOD==============================================================================================================================================================================ID ELEV MSA LAT LON NOTAMS MagVar CENTER/SECTOR/FAA? 0 0 0 0 N 0 381 / 203 /NWx Brf GND TWR DEP ARR UNICOM 0 0 0 0 0 0 RWY HD LAT LON ALT LENGTH WIDTH FREQ RADIAL Center LAT Center LON End LAT End LON 4 CHECKPOINTS===================================================================================================================================================================CK# ID TYPE LAT LON ALT FREQ HD CENTER/SECTOR/FAA?/FREQ DIST TOT D KGRB A 44.4848 -88.12946 316 / 3280 / Y / 125.55 1 MTW V 44.11666 -87.66666 650 11100 137.8598 316 / 3280 / Y / 125.55 29.71217 29.71217 2 HIC V 43.56667 -85.7 920 11760 110.5102 316 / 3259 / Y / 120.85 91.27909 120.9913 3 FNT V 42.96667 -83.73333 770 11690 112.0562 323 / 3506 / Y / 126.75 93.15786 214.1491 4 PSI V 42.7 -83.51667 1148 11100 149.1392 323 / 3506 / Y / 126.75 18.62465 232.7738 KPTK A 42.66495 -83.41566 323 / 3506 / Y / 126.75 4.926787 237.7005 PROFILE DESCENT================================================================================================================================================================== StartProf Desc ID RESTR ALT RESTR ALT SPEED PHP MTW ----------- 0 ----------- 0 0 HIC ----------- 0 ----------- 0 0 FNT ----------- 0 ----------- 0 0 PSI ----------- 0 ----------- 0 0 KPTK ----------- 0 ----------- 0 0 </fs2kplanner> <write_callsigns>

hello!ok.. tried ray's flight plan and it gave the same error.i am definitely running makerwys from within radar contact, and admin privileges are enabled. it looks like the timestamps in rcv4x/data for a4.csv and r4.csv are correctly updating when i do this.i also checked per ronzie's instructions the entries in those files and they look very similar to his, other than slight differences in the data values which are probably to be expected, for example:KPTK, , 42.66533 ,-83.4175 , 4 , 980 , 6190 to see if my scenery is at issue i uninstalled the handful of scenery layers i've added in recent times and rebuilt in fsx, then ran makerwys again in rc, but it still gives the error.jd, i will email the log and .pln file ...i'm not sure if it really shows anything different than the one i posted, it just stops after this section: <get_departure_information> KGRB </get_departure_information> KGRB <get_arrival_information> KPTK </get_arrival_information> KPTKthanks for all the help guys. i'm thoroughly puzzled.cheers,-andy crosby

Andy,Is this with a 3rd party aircraft or a default one? Might be worth trying a default one if you haven't already done so.Also, don't run anything else like weather programs. Just FSX and RC4. See if that makes a difference.

Andy,Is this with a 3rd party aircraft or a default one? Might be worth trying a default one if you haven't already done so.Also, don't run anything else like weather programs. Just FSX and RC4. See if that makes a difference.

the error happens on import (the progress bar shows 3 dots each time)... so it occurs even if i don't have fsx or anything running at all.. it isn't getting far enough to the point where i can start the connection to fsx.i also reproduced it while having fsx loaded with the deafault ultralight and realair duke turbine.cheers,-andy crosby

the error happens on import (the progress bar shows 3 dots each time)... so it occurs even if i don't have fsx or anything running at all.. it isn't getting far enough to the point where i can start the connection to fsx.i also reproduced it while having fsx loaded with the deafault ultralight and realair duke turbine.cheers,-andy crosby

did you send me the log, and the .pln?have you changed any files in the \data directory? adding/changing a frequency, adding a runway?send me your rcv3.dat file from the root directory of rc. and the keyboard.dat file.