June 25, 201213 yr Guys sorry if I got this annoying noise problem with fsx: first of all, these are the characteristics of the PC that should be fairly good: Intel sandy bridge i7 2600K, 8gb ram, video card ati radeon hd 6970 2gb. fsx with the graphics settings to put up almost all the change from 2d to 3d vision with the PMDG 737 NGX is a bit to load the image how can I solve this problem is no solution to significantly improve it where I work fsx.cfg settings or hardware? This is the image to make you realize. http://imageshack.us...2515113879.jpg/ aspect of your response. thanks
June 25, 201213 yr Hi Sebastien, I can't say for certain but it looks like some kind of harware issue to me. How long has this been happening? Does it happen with every plane you load? Have you made any changes recently to FSX or hardware? HowardMSI Mag B650 Tomahawk MB, Ryzen7-7800X3D CPU@5ghz, Arctic AIO II 360 cooler, Nvidia RTX4090 GPU, 32gb DDR5@6000Mhz, SSD/2Tb+SSD/500Gb+OS, Corsair 1000W PSU, LG Ultragear 48"4K, MFG Crosswinds, TQ6 Throttle, Fulcrum One YokeMy FlightSim YouTube Channel: https://www.youtube.com/@skyhigh776
June 25, 201213 yr Looks like something is very wrong with you installation. Did you try reinstalling and ensuring you installed as Administrator. If you did, I recommend opening a ticket with PMDG support. George Morris
June 25, 201213 yr Author Hi Sebastien, I can't say for certain but it looks like some kind of harware issue to me. How long has this been happening? Does it happen with every plane you load? Have you made any changes recently to FSX or hardware? happens with all aircraft.when I put the settings fsx normal is faster to load the image.
June 25, 201213 yr OK, but when did it start Sebastien? As George mentioned, there is something possibly wrong with the installation or hardware setup. I may be wrong, but I can't imagine it's anything else, especially if it happens with everything. But as I asked, when did it first begin? Did it happen after you changed something, or have you only started FSX recently and it has always happened? HowardMSI Mag B650 Tomahawk MB, Ryzen7-7800X3D CPU@5ghz, Arctic AIO II 360 cooler, Nvidia RTX4090 GPU, 32gb DDR5@6000Mhz, SSD/2Tb+SSD/500Gb+OS, Corsair 1000W PSU, LG Ultragear 48"4K, MFG Crosswinds, TQ6 Throttle, Fulcrum One YokeMy FlightSim YouTube Channel: https://www.youtube.com/@skyhigh776
June 25, 201213 yr Author OK, but when did it start Sebastien? As George mentioned, there is something possibly wrong with the installation or hardware setup. I may be wrong, but I can't imagine it's anything else, especially if it happens with everything. But as I asked, when did it first begin? Did it happen after you changed something, or have you only started FSX recently and it has always happened? always is just slow to load the 3D image when I walk fsx settings at maximum.How can I fix it
June 25, 201213 yr You can try to back down the FSX setttings and see if that works. You are probably over taxing your video card. Did you follow all of the recommnedations in the introduction documentation? Again, probably best to check with PMDG support. George Morris
June 25, 201213 yr Hi, Isn't it a bug of DX10 Preview ? Was about to say the same thing.. Check you do not have dx10 preview enabled in the fsx options. Seen this happen too but only when that rubbish was on. 5800X3D - Strix X570-E - 32GB 3600Mhz DDR4 - AMD RX 9070 XT- Samsung 980 Pro x2
June 26, 201213 yr Author Was about to say the same thing.. Check you do not have dx10 preview enabled in the fsx options. Seen this happen too but only when that rubbish was on. BUT WITH THE DISABLED DX10 GRAPHICS NOT MORE POOR?
June 26, 201213 yr BUT WITH THE DISABLED DX10 GRAPHICS NOT MORE POOR? No, when FSX was released back in 2006 the DX10 was just a preview, kind of like a trial to try and show off some of the DX10 features. As it was just a demo, as it were, it is very buggy and hence can cause such issues much like yours. Just switch it off and you won't even notice much of a difference.... apart from of course your NGX flight deck will be fixed! Jordan Gregory MOBO: MSI P67A-C45 (B3) CPU: Intel i5-2500K @ 3.8GHz RAM: 8GB Corsair XMS3 DDR3 @1600MHz GPU: NVIDIA 1GB GTX 560 @ 900MHz CASE: Antec 300 PSU: Rasurbo 650W GaminX HDD: Western Digital Caviar Black 1TB OS: Windows 7 Home Premium 64 Bit
June 26, 201213 yr Author No, when FSX was released back in 2006 the DX10 was just a preview, kind of like a trial to try and show off some of the DX10 features. As it was just a demo, as it were, it is very buggy and hence can cause such issues much like yours. Just switch it off and you won't even notice much of a difference.... apart from of course your NGX flight deck will be fixed! You say that there are differences without dx10.I sincerely known, the 2D view of the cabin details are much sharper and the filter only works with dx10 asinotropo. Asinotropo Without filter air from the outside is full of polygons.
June 26, 201213 yr You say that there are differences without dx10. I sincerely known, the 2D view of the cabin details are much sharper and the filter only works with dx10 asinotropo. Asinotropo Without filter air from the outside is full of polygons. This is where your Catalyst Control Center comes in. try this site: http://fsxtimes.word...2-display-card/ Also, disable bloom in FSX and try the ENBseries shader. Jon Preston
Create an account or sign in to comment