September 29, 201312 yr When selecting the F-86 aircraft the program will run fine until I select the same aircraft but different skin, or when, for instance, selecting A2A Cessna Skyhawk after the F-86. Prepar3d application will crash. I have scanned my computer and it is free of malware ect. Here is the fault I get: Problem signature Problem Event Name: APPCRASH Application Name: Prepar3d.exe Application Version: 1.4.4747.0 Application Timestamp: 50253a53 Fault Module Name: StackHash_7695 Fault Module Version: 6.1.7601.18229 Fault Module Timestamp: 51fb1072 Exception Code: c0000374 Exception Offset: 000ce753 OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 7695 Additional Information 2: 769595e197b302907825ec7509292c5a Additional Information 3: d418 Additional Information 4: d4188def81a6890fddfb219876e49256 Beechcraft Sundowner
September 29, 201312 yr What is your OS and PC specs. Is the Milviz F86 approved for P3D? Best Regards, Vaughan Martell PP-ASEL KDTW
September 29, 201312 yr Author OS is WIN 7 i7 940 @ 2.93 GHz 8 Gig RAM Milviz is approved to operate within Prepar3d Beechcraft Sundowner
September 29, 201312 yr What I would do first is: Reboot the PC. Start P3D with the default Mooney Bravo. Load your aircraft. Do your flight. Exit P3D. Reboot your PC. See if you ever get an error this way. Best Regards, Vaughan Martell PP-ASEL KDTW
September 29, 201312 yr Author Thank you for the suggestion. I tried it and this did not fix issue Beechcraft Sundowner
September 30, 201312 yr While Milviz allows their aircraft to be used in P3D they offer no technical support if you do. I always get a "P3D has stoped working" error message when I close P3D after using the Sabre in it. gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
September 30, 201312 yr When selecting the F-86 aircraft the program will run fine until I select the same aircraft but different skin, or when, for instance, selecting A2A Cessna Skyhawk after the F-86. Prepar3d application will crash. I have scanned my computer and it is free of malware ect. Here is the fault I get: I get almost the same error too when changing the Sabre to another skin or aircraft: Problem signature: Problem Event Name: APPCRASH Application Name: Prepar3D.exe Application Version: 1.4.4747.0 Application Timestamp: 50253a53 Fault Module Name: StackHash_bf79 Fault Module Version: 6.1.7601.18229 Fault Module Timestamp: 51fb1072 Exception Code: c0000374 Exception Offset: 000ce753 OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 3081 Additional Information 1: bf79 Additional Information 2: bf79afaa322b3e9c27eb95430ab77679 Additional Information 3: 72cd Additional Information 4: 72cd47a8e32d26f7155a0beac189acf1 I cannot see this going away until Milviz supports P3D. gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
September 30, 201312 yr If you do not select another aircraft after a flight:If you just do this:Reboot the PC.Start P3D with the default Mooney Bravo.Load your aircraft (any aircraft).Do your flight in that aircraft.Exit P3D.*** Do you get a crash here?Reboot your PC.Note:IMO, you have not given enough information about your set up for anyone to help very much.The error message you have does not point to Milvix as the failing module that caused your problem. Have you seen any other pilots reporting your problem? Best Regards, Vaughan Martell PP-ASEL KDTW
September 30, 201312 yr Author Done what you have suggested and I get no crash. Application crashes only when the MILVIV F-86 is selected. The application will crash when attempting to select another aircraft or skin after using the F-86 or when, flying the F-86, selecting to exit program. My system: Dell Studio XPS 435 MT i7 940 @2.93Ghz 12 gig RAM NVIDIA GTX 460 WIN 7 64 bit Beechcraft Sundowner
September 30, 201312 yr I need to know about this statement .."Application crashes only when the MILVIV F-86 is selected"If you just do this:Reboot the PC.Start P3D with the default Mooney Bravo.Load the MILVIV F-86.Do your flight in the MILVIV F-86.Exit P3D.*** Do you get a crash here?Reboot your PC. Best Regards, Vaughan Martell PP-ASEL KDTW
September 30, 201312 yr Author yes, I get the crash after using the F-86 and exiting program as well. Followed your suggestion. Application continues to crash. I did this: Reboot the PC. Start P3D with the default Mooney Bravo. Load the MILVIV F-86. Do your flight in the MILVIV F-86. Exit P3D. *** Do you get a crash here? Yes. Reboot your PC Beechcraft Sundowner
October 1, 201312 yr You have not given enough information about your set up (PC/hardware/running software/network etc.for anyone to help very much.The error message you have does not point to Milviz as the failing module that caused your problem. Have you seen any other pilots reporting your problem? Best Regards, Vaughan Martell PP-ASEL KDTW
October 1, 201312 yr Also, Check here to make sure you have updated gauges (software Update) for the F86.Milviz support forum:North American F-86 Support Forumhttp://www.milviz.com/forum/viewforum.php?f=70 Best Regards, Vaughan Martell PP-ASEL KDTW
November 13, 201312 yr Got the same problem. Anyone know a fix? Simmerhead - Making the virtual skies unsafe since 1987!
November 14, 201312 yr Moderator Just OOC - AFTER using the F-86 and BEFORE exiting P3D - what happens if you reload the default Mooney and then exit? Still crash? Vic RIG#1 - I9 14900K MSI Pro z790 RTX 5070Ti 40" 4K Monitor 3840x2160
Create an account or sign in to comment