October 21, 201312 yr This is for my old card. New one arrives in half an hour. -------------------------------------------------------------------------------------------------------------------- Old GTX 580 i7 3770K at 4.5 PMDG 737 NGX FSX EGLL 27L FSX Grey and Rainy weather scenario With frame rate unlocked FSX tweaks: UsePools=0 AffinityMask=14 HIGHMEMFIX=1 8XS Combined VC 45 8XS Combined 2 x SGSS VC 45 8XS Combined 4 x SGSS VC 41 artefacts outside view with BP=0 8XSQ Combined VC 45 8XSQ Combined 2 x SGSS VC 44 8XSQ Combined 4 x SGSS VC 42 artefacts outside view with BP=0 Battlefield 3 Strike at Karkland Frame rate ranged from 47 - 78. Most of the time at 65.
October 21, 201312 yr Okay chaps, this is the result... Scenario is PMDG 737, at EGLL runway 27L. Weather is FSX grey and rainy. Frame rate is set to unlimited. I'm using BP=0, AF=14 and of course HIGHMEMFIX. I should mention, with frame rate unlimited, some scenarios result in artefacts when panning in an outside view, due to the massive amount of data the GTX 580 has to deal with as a result of BP=0. GTX 580 8XS Combined 2 x SGSS VC 45 8XS Combined 4 x SGSS VC 41 artefacts outside view, when panning. 8XSQ Combined VC 45 8XSQ Combined 2 x SGSS VC 44 8XSQ Combined 4 x SGSS VC 42 artefacts outside view when panning. BF3 Strike at Karkland. 47-78, mostly 65. New EVGA GTX 770. 4 GB Duel BIOS. 8XS Combined VC 45 8XS Combined 2 x SGSS VC 47 8XS Combined 4 x SGSS VC 45 No artefacts with the GTX 770. Due to the 4 GB memory perhaps. 8XSQ Combined VC 46 8XSQ Combined 2 x SGSS VC 45 8XSQ Combined 4 x SGSS VC 46 artefacts outside view when panning. BF3 Strike at Karkland. 96-120 Mostly 105. :Shocked: So... 3 or 4% increase in performance without SGSS. And 10% increase in performance with SGSS. BF3 an astonishing 90% increase in performance!
October 21, 201312 yr Okay chaps, this is the result... Scenario is PMDG 737, at EGLL runway 27L. Weather is FSX grey and rainy. Frame rate is set to unlimited. I'm using BP=0, AF=14 and of course HIGHMEMFIX. I should mention, with frame rate unlimited, some scenarios result in artefacts when panning in an outside view, due to the massive amount of data the GTX 580 has to deal with as a result of BP=0. GTX 580 8XS Combined 2 x SGSS VC 45 8XS Combined 4 x SGSS VC 41 artefacts outside view, when panning. 8XSQ Combined VC 45 8XSQ Combined 2 x SGSS VC 44 8XSQ Combined 4 x SGSS VC 42 artefacts outside view when panning. BF3 Strike at Karkland. 47-78, mostly 65. New EVGA GTX 770. 4 GB Duel BIOS. 8XS Combined VC 45 8XS Combined 2 x SGSS VC 47 8XS Combined 4 x SGSS VC 45 No artefacts with the GTX 770. Due to the 4 GB memory perhaps. 8XSQ Combined VC 46 8XSQ Combined 2 x SGSS VC 45 8XSQ Combined 4 x SGSS VC 46 artefacts outside view when panning. BF3 Strike at Karkland. 96-120 Mostly 105. :Shocked: So... 3 or 4% increase in performance without SGSS. And 10% increase in performance with SGSS. BF3 an astonishing 90% increase in performance! Hey thanks for those results it makes thinking about cards a lot easier when you see other peoples experiences. The GTX 770 is it good card and basically a respin of the 680 which was a beast in its own right. Can you do an extended flight at 4xSGSS and tell me how that goes something like an hour to an hour and a half in that weather scenario you described. What was it called grey and raining? Or could I send you a custom weather scenario? How do I extract that from FSX? I ask because I have a few custom saved ones that were created by opus that I really like. C.
October 21, 201312 yr Okay chaps, this is the result... Scenario is PMDG 737, at EGLL runway 27L. Weather is FSX grey and rainy. Frame rate is set to unlimited. I'm using BP=0, AF=14 and of course HIGHMEMFIX. I should mention, with frame rate unlimited, some scenarios result in artefacts when panning in an outside view, due to the massive amount of data the GTX 580 has to deal with as a result of BP=0. GTX 580 8XS Combined 2 x SGSS VC 45 8XS Combined 4 x SGSS VC 41 artefacts outside view, when panning. 8XSQ Combined VC 45 8XSQ Combined 2 x SGSS VC 44 8XSQ Combined 4 x SGSS VC 42 artefacts outside view when panning. BF3 Strike at Karkland. 47-78, mostly 65. New EVGA GTX 770. 4 GB Duel BIOS. 8XS Combined VC 45 8XS Combined 2 x SGSS VC 47 8XS Combined 4 x SGSS VC 45 No artefacts with the GTX 770. Due to the 4 GB memory perhaps. 8XSQ Combined VC 46 8XSQ Combined 2 x SGSS VC 45 8XSQ Combined 4 x SGSS VC 46 artefacts outside view when panning. BF3 Strike at Karkland. 96-120 Mostly 105. :Shocked: So... 3 or 4% increase in performance without SGSS. And 10% increase in performance with SGSS. BF3 an astonishing 90% increase in performance! hello . are you using vsync in these tests ? cheers Faisal Altheyab
October 21, 201312 yr Yes I am using V-Sync, however I have a 120 Hz monitor. So not near 120 frames per second, so i could get away with V-Sync off without fear of tearing. Something I'll try perhaps tomorrow.
October 21, 201312 yr Yes I am using V-Sync, however I have a 120 Hz monitor. So not near 120 frames per second, so i could get away with V-Sync off without fear of tearing. Something I'll try perhaps tomorrow. Vertical tearing happens no matter what speed your monitor is. If you have trackIr, it can be really apparent as you pan left and right. But then again. I have not had more than 75Hz for a long time so I could be talking our of my arse. But without vsync, tearing will happen no matter what my fps are. Charles.
October 22, 201312 yr Author I can report the same improvements for FSX with my new GTX 760 4GB dual bios, it will self OC to 1250mhz. Good powerful GPU. I have 30FPS locked now everywhere, but very high stutter with PMDG 777, I don't know why, I hope PMDG will optimize this great plane. Regards, Albert Miu CPU: Intel i7 4790k @4.6Ghz GPU: ASUS GTX 1080 8GB OC Motherboard: Asus MAXIMUS VI Hero RAM: Corsair Vengeance Pro 16GB 1866mhz PSU: EVGA SuperNOVA 850W G2 Case: Corsair VENGEANCE C70 Cooler: Corsair Hydro Series H110 Monitor: BENQ 1920x1080 Windows: 10 x64 Professional X-Plane 11 Group: Facebook
October 22, 201312 yr Do you have it locked at 30 in bad weather too ? Sent from my Galaxy Nexus using Tapatalk Faisal Altheyab
October 22, 201312 yr Author PMDG 777 overcast 1024x1024 clouds 30FPS locked min 28-29 Here is a picture from my sim, bad weather, overcast. It's from my facebook page that's why it's pixelated. I use 8XS Combined 4 x SGSS Regards, Albert Miu CPU: Intel i7 4790k @4.6Ghz GPU: ASUS GTX 1080 8GB OC Motherboard: Asus MAXIMUS VI Hero RAM: Corsair Vengeance Pro 16GB 1866mhz PSU: EVGA SuperNOVA 850W G2 Case: Corsair VENGEANCE C70 Cooler: Corsair Hydro Series H110 Monitor: BENQ 1920x1080 Windows: 10 x64 Professional X-Plane 11 Group: Facebook
October 22, 201312 yr Vertical tearing happens no matter what speed your monitor is. If you have trackIr, it can be really apparent as you pan left and right. But then again. I have not had more than 75Hz for a long time so I could be talking our of my arse. But without vsync, tearing will happen no matter what my fps are. Charles. I'm not an expert on VSync either. The way I understand tearing, in regard to VSync, is that it occurs more commonly when your frame rate exceeds you monitors refresh rate. Given that my refresh rate is 120 Hz, I would see no/minimal tearing below 120 FPS. I have tried briefly without VSync a while back, and didn't see any tearing as I recall. I mean it is well known, that one way to reduce tearing with Vsync off, is to increase graphical settings so as to reduce frame rate, lower than refresh rate. Anyway, I will try it later and let you know. I'm sure you're probably right. It's not something I've researched.
October 22, 201312 yr Author As you can see from my previous post I have steady 30 FPS, but I have stutters when mouse arrow is on the screen! This mouse problem is killing me, I hope PMDG will resolve this issue. I don't have this problem with other developers and other aircrafts run like knife through butter, silky smooth. When it comes to NGX and 777 mouse cursor takes all the joy!! Regards, Albert Miu CPU: Intel i7 4790k @4.6Ghz GPU: ASUS GTX 1080 8GB OC Motherboard: Asus MAXIMUS VI Hero RAM: Corsair Vengeance Pro 16GB 1866mhz PSU: EVGA SuperNOVA 850W G2 Case: Corsair VENGEANCE C70 Cooler: Corsair Hydro Series H110 Monitor: BENQ 1920x1080 Windows: 10 x64 Professional X-Plane 11 Group: Facebook
October 22, 201312 yr As you can see from my previous post I have steady 30 FPS, but I have stutters when mouse arrow is on the screen! This mouse problem is killing me, I hope PMDG will resolve this issue. I don't have this problem with other developers and other aircrafts run like knife through butter, silky smooth. When it comes to NGX and 777 mouse cursor takes all the joy!! Actually all add-ons suffer from frame rate drop with mouse cursor on screen. Not sure why you get stutters. It is worse in PMDG aircraft, I agree. They may be able to improve it, but not fix it, It's an FSX bug. Vertical tearing happens no matter what speed your monitor is. If you have trackIr, it can be really apparent as you pan left and right. But then again. I have not had more than 75Hz for a long time so I could be talking our of my arse. But without vsync, tearing will happen no matter what my fps are. Charles. Well, as I said I would, I have tested with no VSync. I saw no tearing at all. No different to with it on. Went mad with different add-ons. No tearing.
October 22, 201312 yr Author Well, then, let's hope they will improve like Q400! Regards, Albert Miu CPU: Intel i7 4790k @4.6Ghz GPU: ASUS GTX 1080 8GB OC Motherboard: Asus MAXIMUS VI Hero RAM: Corsair Vengeance Pro 16GB 1866mhz PSU: EVGA SuperNOVA 850W G2 Case: Corsair VENGEANCE C70 Cooler: Corsair Hydro Series H110 Monitor: BENQ 1920x1080 Windows: 10 x64 Professional X-Plane 11 Group: Facebook
Create an account or sign in to comment