November 29, 20169 yr I recently purchased 737NGX Captains Reboot for P3, and have the default 737 installed. I've run the setup wizard, have the icon on my desktop and enabled FS2Crew. However, when I open P3 its nowhere to be found. I've tried installing multiple times and have completely deleted antivirus software, with no luck. I have also purchased the Airbus A319 from FS2Crew and was able to install that successfully. Have only 1 problem, I'm unable to manually set the autopilot. Using the mouse I can see that the button is being pushed for the Airspeed, Heading, and Altitude, but I'm unable to change the #'s. Tried left and right clicking. Any help would be much appreciated! Thanks in advance Mark Nelson
November 29, 20169 yr I recently purchased 737NGX Captains Reboot for P3, and have the default 737 installed. I've run the setup wizard, have the icon on my desktop and enabled FS2Crew. However, when I open P3 its nowhere to be found. I've tried installing multiple times and have completely deleted antivirus software, with no luck. Hello, The Fs2crew reboot is for the PMDG 737 NGX and doesn't work with the default fsx 737. So it's normal you cannot find anything when you start the default 737. but I'm unable to change the #'s What do you mean by #'s ? Romain Roux Avec l'avion, nous avons inventé la ligne droite. St Exupéry, Terre des hommes.
November 29, 20169 yr Ok sorry.Please have a look at these two topics and see if it is related to your issue: http://www.avsim.com/topic/491640-no-panel/ http://www.avsim.com/topic/491851-pressing-c-key-doesnt-bring-up-the-panel-anymore/ Romain Roux Avec l'avion, nous avons inventé la ligne droite. St Exupéry, Terre des hommes.
November 29, 20169 yr Commercial Member You need to assign a Key to AUTOFEATHER ARM/OFF to open the Main FS2Crew Panel. I use the "N" key for that. Please read the manuals and the SOP tutorials: http://www.support.fs2crew.com/help/manuals/#pageid=pmdg_737_ngx_reboot Best, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
November 30, 20169 yr Author You need to assign a Key to AUTOFEATHER ARM/OFF to open the Main FS2Crew Panel. I use the "N" key for that. Please read the manuals and the SOP tutorials: http://www.support.fs2crew.com/help/manuals/#pageid=pmdg_737_ngx_reboot Best, Sorry but I'm not seeing AUTOFEATHER in the FS2Crew panel. Can you walk me through that a little? Mark Nelson
November 30, 20169 yr Hello, Autofeather arm/off is a assignable key in the fsx commands menu. You should really have a look at the manuals and tutorials as Bryan said, they explain with screenshots what to do. Romain Roux Avec l'avion, nous avons inventé la ligne droite. St Exupéry, Terre des hommes.
November 30, 20169 yr Commercial Member Indeed, the manuals are a must. Here's another shot of Autofeather Arm Off http://www.support.fs2crew.com/help/manuals/#pageid=opening_and_closing_the_main_panel5 B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
November 30, 20169 yr Author This is getting seriously frustrating. Maybe I'm not explaining this very well. I assumed when I downloaded the program it would show it in "Vehicles" on the P3D screen or somewhere in P3D?? But I don't. I assigned the Autofeather a keyboard assignment, but I'm confused on how that helps since I can't find the program to begin with. I have read the manual. Mark Nelson
November 30, 20169 yr Hi, Fs2crew is link to the NGX. So what you won't find the program externally anywhere. What you have to do is start P3D, launch a flight with the NGX and then, if you press the key assigned to autofeather arm/off, you will see a popup panel appears which is the Fs2crew main panel.This is why we send you to check if you have assign a key to that feature in the P3D menu. Now, if when you press that key while you are in the cockpit of the NGX, chances are that the panel.cfg of the NGX have not been correctly updated for some reason, that's why I gave references to other topics were we exchanged on that matter.Send me your panel.cfg by pm, I'm gonna check it for you if you want. Romain Roux Avec l'avion, nous avons inventé la ligne droite. St Exupéry, Terre des hommes.
November 30, 20169 yr Commercial Member Romain is right. FS2Crew is literally "embedded" directly inside the PMDG 737. Therefore, it will not appear as a "vehicle" because it's not its own vehicle. Rather, it's physically a part of the PMDG 737 in this case. Here's a Froogle video that might help you... but the SOP manuals are really a must. B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
December 1, 20169 yr Author Program files(x86)>Lockheed Martin>Prepar3Dv3>SimObjects>Airplanes>PMDG 737-800NGX>panel. Not seeing panel.cfg I have: hud panel panel_4_3 panel VC HIGH panel VC LOW panel WIDE PMDG_NXG main 43 PMDG_NXG main wide PMDG_NXG OVHD wide PMDG_NXG raidios Mark Nelson
December 1, 20169 yr Hi, The text file "panel" is the panel.cfg. Only the extension is hidden as a Windows option. In this file that you can open with the block note, you should find the following lines: [Window Titles] ... window20=FS2Crew Main Panel window21=FS2Crew Secondary Panel And lower in the file, you should the corresponding definitions of these windows: [Window20] size_mm=1069, 51 window_size= 0.5567, 0.0425 window_pos=0.00,0.05 visible=0 ident=1000 zorder=100 sizeable=1 gauge00=FS2Crew2010\Versions\PMDG737NGXRB\Gauges\FS2CrewNGXRB!FS2Crew_MainPanel, 0,0,1069,51 gauge01=FS2Crew2010\Versions\PMDG737NGXRB\Gauges\FS2CrewNGXRB!FS2Crew_Audio, 20,20,5,5 gauge02=FS2Crew2010\Versions\PMDG737NGXRB\Gauges\FS2CrewNGXRB!FS2Crew_VoiceMain, 10,10,5,5 [Window21] size_mm=402, 639 window_size= 0.2093, 0.5325 position=3 visible=0 ident=1001 zorder=105 sizeable=1 gauge00=FS2Crew2010\Versions\PMDG737NGXRB\Gauges\FS2CrewNGXRB!FS2Crew_SecondaryPanel, 0,0,402,639 Can you check that? Romain Roux Avec l'avion, nous avons inventé la ligne droite. St Exupéry, Terre des hommes.
December 1, 20169 yr Author Is this what your looking for? // // // PMDG 737NGX - Wide Screen // // Current with Build: 1.10.6461 /////////////////////////////////////////////////////// [Window Titles] window00=Main Panel window01=Lower Main window02=CDU (Left) window03=Aft Electronic Panel window04=Fire Protection window05=Forward Overhead window06=Aft Overhead window07=Overhead Lights window08=Lower DU window09=MCP (full) window10=Radios window11=Zoomed Left Outboard DU window12=Zoomed Left Inboard DU window13=Zoomed Upper DU window14=Zoomed Lower DU window15=Zoomed Right Inboard DU window16=Zoomed Right Outboard DU window17=CDU (Right) window18=Minipanel window19=Light Sensor window20=FS2Crew Main Panel window21=FS2Crew Secondary Panel [VIEWS] VIEW_FORWARD_WINDOWS=MAIN_PANEL,MINIPANEL VIEW_FORWARD_DIR=10.000, 0.000, 0.000 VIEW_FORWARD_ZOOM=0.8 //-------------------------------------------------------- // // Main panel // [Window00] file_1024=PMDG_NGX_main_wide.bmp size_mm=1920, 1200 window_size= 1.000, 1.000 position=7 visible=1 ident=MAIN_PANEL Mark Nelson
December 1, 20169 yr Yes. It is in the "panel" file, isn't it? So it looks fine. If you launch a flight with the NGX and press the key you have assigned to Autofeather arm/off, then you should see the Fs2crew main panel popping up. Romain Roux Avec l'avion, nous avons inventé la ligne droite. St Exupéry, Terre des hommes.
Archived
This topic is now archived and is closed to further replies.