February 5, 20179 yr Something to do with meshes// afcads. Aircraft sinks through the taxiways and runways. Googled around a bit, no other amsterdams installed, scenery library is as flytampa says to be. Something annoying happens everytime I buy a new flytampa scenery, can someone help. Arnav Agarwal
February 6, 20179 yr Sounds like you already asked about this over in FT's support forum and you also say your scenery library is in order in regards to FT but still I would like to ask if you have an entry for Amsterdam landclass in your scenery library? Reason I ask is a friend of mine had a similar issue and in his case it was caused by the landclass entry wasn't in his scenery library. This is what it looks like in my case checking my scenery.cfg file. [Area.176] Title=FlyTampa-Amsterdam_LC Local=F:\Program Files (x86)\Lockheed Martin\Prepar3D v3\FlyTampa\Amsterdam_LC Active=TRUE Required=FALSE Layer=176
February 6, 20179 yr Beside what Richard says , check also if you have an Alt EHAM bgl in you scenery/world/scenery folder... 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
February 6, 20179 yr Author Sounds like you already asked about this over in FT's support forum and you also say your scenery library is in order in regards to FT but still I would like to ask if you have an entry for Amsterdam landclass in your scenery library? Reason I ask is a friend of mine had a similar issue and in his case it was caused by the landclass entry wasn't in his scenery library. This is what it looks like in my case checking my scenery.cfg file. [Area.176] Title=FlyTampa-Amsterdam_LC Local=F:\Program Files (x86)\Lockheed Martin\Prepar3D v3\FlyTampa\Amsterdam_LC Active=TRUE Required=FALSE Layer=176 yup, I have it. Beside what Richard says , check also if you have an Alt EHAM bgl in you scenery/world/scenery folder... Do you mean dummy eham bgl? Arnav Agarwal
February 6, 20179 yr yup, I have it. Do you mean dummy eham bgl? Yes, that one. I advice you to reinstall the scenery . 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
February 6, 20179 yr Author Yes, that one. I advice you to reinstall the scenery . Tried that, no results. Arnav Agarwal
February 6, 20179 yr If you have UTX Europe installed then you have to "check status of repositioned airport" in the options tab and if EHAM is listed there, disable it....... AMD Ryzen 7800x3d, Asus ROG Strix RTX4090, Asus x670e-e, G-Skill F5-6000J3038F16GX2-TZ5NR
February 6, 20179 yr Author If you have UTX Europe installed then you have to "check status of repositioned airport" in the options tab and if EHAM is listed there, disable it....... No UTX No UTX Ftx global + OLC + Vector (AEC EHAM disabled) Arnav Agarwal
February 6, 20179 yr I had this exact issue. Be sure that you have to Amsterdam LC active and below the Amsterdam folder. Also above any Orbx etc. Also check that everything is configured properly within Orbx Vector. I personally do not use the product but have heard it can cause issues like this.
February 6, 20179 yr Author I had this exact issue. Be sure that you have to Amsterdam LC active and below the Amsterdam folder. Also above any Orbx etc. Also check that everything is configured properly within Orbx Vector. I personally do not use the product but have heard it can cause issues like this. Tried all of that Arnav Agarwal
February 7, 20179 yr Tried all of that Not sure what else to suggest. I am sure another AVSIM user will be able to assist you further. Good luck!
February 7, 20179 yr Author Somehow... the problem fixed itself. Well to anyone else who gets this... good luck and welcome to the glamorous world of ESP!!!!!!!!!! Arnav Agarwal
February 7, 20179 yr Somehow... the problem fixed itself. Well to anyone else who gets this... good luck and welcome to the glamorous world of ESP!!!!!!!!!! sure you didnt do anything getting this problem
February 8, 20179 yr Author sure you didnt do anything getting this problem nope not much... Arnav Agarwal
Archived
This topic is now archived and is closed to further replies.