arnava1304

I can't upgrade until December, but thanks for the help!

yes

-- No success, I've a feeling I'm going to have to live with this issue. Also, what I am calling motion blur might actually be ghost image.

It's 60hz, I've used this monitor for 3 years with no issue. It's an AOC E2250S LCD monitor. Unrelated question, do higher refresh rates help in any way?

Hi. I gave been doing A LOT to my sim lately, so if I have any issues backtracking is near impossible. I have bee getting this wierd issue where I get a sort of 'motion blur' thing. I see multiple of certain objects on screen (trees, buttons, hud readouts...) and it's really grainy for a second. This is amplified when I pan. It becomes normal again once I stop panning for about 0.5-1 seconds. It's a bit of an immersion ruiner. I though it was a gpu or nv issue, but I can rule that out based on my nvi and cfg settings. I have dumped cfgs already, didn't fix. I have an absolute rubbish system, but I'm stuck with it until November. (GTX 750ti, I7-4770, 1TB Toshiba HDD, 16GB DDR5.) Can anyone fix this visual defect? Arnav

Can anyone help me with the error in the attached image, i've installed the latest libraries from the website.

1. It was working fine in P3D 2.5. 2. I uninstalled the products from 2.5 and into 3, resulting in the error above. 3. I uninstalled it from v3 and changed the v3 directory names to trick the installer into installing it into p3d 2.5, resulting in the following when loading the sim: FSUIPC log: 334109 Hook Error: can't find .1427701400 in SIM1.dll 334109 Hook Error: can't find .1427701400 in VISUALFX.dll I running on windows 10 64bit. Now neither p3d v3 nor p3d v2 will run pmdg products. After this, I went back to v3 again, but with no luck. ​

I've only installed it into p3d3 though, not 2.5. I tried uninstalling and running it only in p3d 2.5, but no luck.

Hi, I recently installed v3 but after trying a side by side install of pmdg 738/739/736/737/772/773, neither p3d 2.5 nor p3d v3 work. I followed all install instructions. The sim just partially loads the aircraft and closes, no error. Eventvwr has the following: <code> Fault bucket 128924842659, type 5 Event Name: AppHangB1 Response: Not available Cab Id: 0 Problem signature: P1: Prepar3D.exe P2: 3.0.10.14945 P3: 560b4abe P4: 6c02 P5: 67246336 P6: P7: P8: P9: P10: Attached files: These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Critical_Prepar3D.exe_9c5e911e42754b78c2a26f99b16fcdef92684c18_eafecabe_21b0c0a8 Analysis symbol: Rechecking for solution: 0 Report ID: 4741eacb-74e5-11e5-830c-74d435e46466 Report Status: 0 Hashed bucket: e97123b23051e3be987a073bde400459 </code> <code> The program Prepar3D.exe version 3.0.10.14945 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel. Process ID: 37f4 Start Time: 01d108f100b43f0b Termination Time: 4294967295 Application Path: E:\Lockheed Martin\Prepar3D v3\Prepar3D.exe Report Id: 4741eacb-74e5-11e5-830c-74d435e46466 Faulting package full name: Faulting package-relative application ID: </code> Fsuipc log says: <code> 590610 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.air 597235 Aircraft="Boeing 737-800NGX Thomson Airlines (TUI) Winglets" 600438 Hook Error: can't find .1467084248 in SIM1.dll 600438 Hook Error: can't find .1467084248 in VISUALFX.dll </code> I've spent four hours on this, one thing I haven't tried and don't want to either is uninstalling p3d 2.5.

Anyone?

I have, no luck.

Hi, I recently installed v3 but after trying a side by side install of pmdg 738/739/736/737/772/773, neither p3d 2.5 nor p3d v3 work. I followed all install instructions. The sim just partially loads the aircraft and closes, no error. Eventvwr has the following: Fault bucket 128924842659, type 5 Event Name: AppHangB1 Response: Not available Cab Id: 0 Problem signature: P1: Prepar3D.exe P2: 3.0.10.14946 P3: 560b4abe P4: 6c02 P5: 67246336 P6: P7: P8: P9: P10: Attached files: These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Critical_Prepar3D.exe_9c5e911e42754b78c2a26f99b16fcdef92684c18_eafecabe_21b0c0a8 Analysis symbol: Rechecking for solution: 0 Report ID: 4741eacb-74e5-11e5-830c-74d435e46466 Report Status: 0 Hashed bucket: e97123b23051e3be987a073bde400459 The program Prepar3D.exe version 3.0.10.14946 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel. Process ID: 37f4 Start Time: 01d108f100b43f0b Termination Time: 4294967295 Application Path: E:\Lockheed Martin\Prepar3D v3\Prepar3D.exe Report Id: 4741eacb-74e5-11e5-830c-74d435e46466 Faulting package full name: Faulting package-relative application ID: Fsuipc log says: 590610 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.air 597235 Aircraft="Boeing 737-800NGX Thomson Airlines (TUI) Winglets" 600438 Hook Error: can't find .1467084248 in SIM1.dll 600438 Hook Error: can't find .1467084248 in VISUALFX.dll I've spent four hours on this, one thing I haven't tried and don't want to either is uninstalling p3d 2.5.

With hmf in, 70+ fps. Craaaaazzzzzzyyyyy to ask for 4 digits!!!

Couldnt find it in my gigabyte b85m-d3h bios and it was off in win8.1. Oh well...

+2?

Yaaaaaaasssss!!!!!!! :) :) The long wait is over!!!

Mate... FS9 is dead.

Hi all, I am eager to get into WIN10, but whenever I am on 75% setup, the setup returns to win8.1 each time and gives me an error (0x8007000D - 0x4001C) saying something on the grounds of "The first boot worked but the second failed." (All i computer talk of course ). Can anybody help please.

Pete, I must say that this community would fail competely without your contributions, thanks A LOT.

Hello, I did a flight on Wednesday in the NGX and all was good. Today, I load up p3d and every time I load up a airport outside the USA, I get this error: Fault bucket 73984143801, type 1 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: Prepar3D.exe P2: 2.5.12945.0 P3: 54edcece P4: weather.dll P5: 2.5.12945.0 P6: 54edce46 P7: c0000005 P8: 0003175e P9: P10: Attached files: C:\Users\Arnav\AppData\Roaming\Lockheed Martin\Prepar3D v2\Prepar3D.cfg.txt C:\Users\Arnav\AppData\Roaming\Lockheed Martin\Prepar3D v2\dxdiag.txt C:\Users\Arnav\AppData\Roaming\Lockheed Martin\Prepar3D v2\scenery.cfg C:\Users\Arnav\AppData\Roaming\Lockheed Martin\Prepar3D v2\fdr.dat C:\Users\Arnav\AppData\Roaming\Lockheed Martin\Prepar3D v2\dll.xml C:\Users\Arnav\AppData\Local\Temp\WER66F7.tmp.WERInternalMetadata.xml These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Prepar3D.exe_aeb6c8b2ad8881e294e0a8999661b075de74d9_00000000_15f87b4b Analysis symbol: Rechecking for solution: 0 Report Id: fec39b88-dae6-11e4-82bd-74d435e46466 Report Status: 0 I never fly in the USA so this makes the sim unusable for me. Even when I disable ALL my addon scenery, this error shows up. I've spent 5 hours on this but no luck, please help.

Thanks for the replies, from what I understand, 1,000,000 hours is okay as long as you take frequent breaks.

Thanks, you magnificent doctors! Couldn't agree more.

http://forum.avsim.net/topic/460877-effects-of-flight-simulation-on-health/

http://forum.avsim.net/topic/460877-effects-of-flight-simulation-on-health/