June 7, 20178 yr 6 hours ago, BusheFlyer said: It points to something being screwy somewhere.. my system is way way below yours and not a stutter to be found with high settings. Drivers perhaps? or an unusual graphics card setting? There are a number of people reporting poor performance with really high spec PC's.. it points to something outside of P3D standard settings. The dual cards maybe.. Ya maybe driver Going to do a few tests Darn it its annoying Thanks for your input thou. Mike
June 7, 20178 yr On 3/6/2017 at 0:21 AM, mikeymike said: Stutters here and then slideshiw after 5 min I7 4790k 2x titan sc 6gb each Was fine in v3.4 I have the same problem, 3.4.22 works fin without problems, with the same settings I have stutters and blur. with v4 @1920x1080 CPU i7-7700k oc 4,6 (mult. 46,0 x 100MHz) Noctua NH-D14 cooler GPU MSI GeForce GTX 1070 Gaming X 8G V330-001R MotherBoard: MSI H270 Gaming Pro Carbon Intel H270 So.1151 Dual Channel RAM 16GB Corsair Vengeance LPX schwarz DDR4-3000 DIMM CL15 Dual Kit PSU Corsair CX750M SSD 1000GB Samsung 850 Evo 2.5"
June 8, 20178 yr Number 1 nice thing: Graphics, especially on the plane are excellent - using nvInspector high quality with 1070 SLI. No 2 is great ground and #3 is smoothness. Cheers bs AMD RYZEN 9 5900X 12 CORE CPU - ZOTAC RTX 3060Ti GPU - NZXT H510i ELITE CASE - EVO M.2 970 500GB DRIVE - 32GB XTREEM 4000 MEM - XPG GOLD 80+ 650 WATT PS - NZXT 280 HYBRID COOLER
June 8, 20178 yr 4 hours ago, congstar said: I have the same problem, 3.4.22 works fin without problems, with the same settings I have stutters and blur. with v4 @1920x1080 CPU i7-7700k oc 4,6 (mult. 46,0 x 100MHz) Noctua NH-D14 cooler GPU MSI GeForce GTX 1070 Gaming X 8G V330-001R MotherBoard: MSI H270 Gaming Pro Carbon Intel H270 So.1151 Dual Channel RAM 16GB Corsair Vengeance LPX schwarz DDR4-3000 DIMM CL15 Dual Kit PSU Corsair CX750M SSD 1000GB Samsung 850 Evo 2.5" I reinstalled sim that fixed it a little 4xssaa somethibg causing small stutter every minute or so Dynamic lighting off Speef trees off 3hz 4k tv Etc etc Still testing
June 8, 20178 yr Hi, SSAA is causing low FPS and stutters on my system, so I am using 8XMSAA instead, and wow, great improvement... Also, to avoid slow loading textures going sharps while flying over, put TESSELLATION slider at max to the right. Mike Mike Lab WIN10 / I7-6700K HT ON / GTX980 / 16 GB RAM / 3 x SAMSUNG EVO 1TB SSD / 1 X WD BLACK 2TB HDD / 32" 60hz Monitor @ 2560x1440 / P3Dv4.4 No AM, Locked to 59 FPS, VSync ON, Triple buffering enabled Process Lasso used to unload all other applications than P3D running on core 0
June 8, 20178 yr 13 hours ago, Rob Ainscough said: Yes, full coverage waterblock (I installed and checked proper coverage, pad thickness, mounting). It's impossible to squeeze in a temp probe and I can't find anything that monitors VRM for GPU? Cheers, Rob. You're right, it seems that nVidia don't allow VRM temp monitoring, and as your's is a reference card I doubt there's anything available for that. Power supply up to the job? Is it feeding power from different rails?
June 8, 20178 yr Also, in GPU-Z there's an option in the 'sensors' tab called 'PerfCap Reason'. Try running that whilst P3D is open to see what it says. Its tool tip shows the different reasons available (Power, thermal limit etc)
June 11, 20178 yr On 6/2/2017 at 6:25 PM, Syonco said: I'm also experiencing exactly the same.. My GPU (Titan XP) will boost up to 2100Mhz once loaded into the sim. Shortly after it goes down to idle clock speeds 1400Mhz. My GPU is also water cooled, running from 32-48c. I updated to nVidia's 382.53 and the boost/OC problem has no resolved itself ... my boosting is now consistently high under high loads. Cheers, Rob.
Archived
This topic is now archived and is closed to further replies.