Jump to content
Sign in to follow this  
Followers 0
frmeyer

GNS 530W for V35B Bonanza

By frmeyer, in RXP GNS 530W/430W V2

Recommended Posts

frmeyer    1

frmeyer
Posted

hi guys

I like to buy  GNS 530W for V35B Bonanza,but in P3dv3 is a 430 installed.

does it overwrite this GNS 430 or is it not possible ,

and also i like to use it in the real air duke as well , it's a g500 in there

thanks muller

 

 

 

Share this post

Link to post
Share on other sites

Indy511    686

Indy511
Posted
3 hours ago, muller23 said:

ok

I bought it and its overwritten the GNS 430

my knobs are not align as it should ,
how do i correct this ,because is hard to dial in things is not stabil
otherwise unit function as is should

http://www.mediafire.com/file/o9n2mzfsjc1icqg/nobs are not correct here.jpg

thanks

 

 

Shift+4 gives option to turn off 3D knobs.

 

 

Share this post

Link to post
Share on other sites

Bert Pieke    7,585

Bert Pieke
Posted
On 6/6/2018 at 7:54 PM, muller23 said:

and also i like to use it in the real air duke as well , it's a g500 in there

thanks muller

 

 

 

For the Piston Duke, I found that the best solution is to install the RXP 530 as a GPS 500 (no radios).  It looks and works great.. and the radios are separate in the panel.

Bert

Share this post

Link to post
Share on other sites

frmeyer    1

frmeyer
Posted
1 hour ago, Bills511 said:

Shift+4 gives option to turn off 3D knobs.

shift+4 doesn't work here,witch option panel is this

thanks

Share this post

Link to post
Share on other sites

frmeyer    1

frmeyer
Posted
52 minutes ago, Bert Pieke said:

For the Piston Duke, I found that the best solution is to install the RXP 530 as a GPS 500 (no radios).  It looks and works great.. and the radios are separate in the panel.

thanks Bert for the advice

Share this post

Link to post
Share on other sites

frmeyer    1

frmeyer
Posted

v35B

got it solved,not working with shift+4

but this here from main panel p3dv3

3d knobs fix    , vehicle /instrument panel /control windows it bring the panel up

works like charm here

 

real air duke v2

my xp GNS 530 in the duke is inside the g500 housing ,how to fix this ,only the pop up works not the real version

http://www.mediafire.com/file/uxxoyxdg7i5bue1/real air.jpg

 

thanks

 

 

 

 

Share this post

Link to post
Share on other sites

Bert Pieke    7,585

Bert Pieke
Posted

In the panel.cfg file:

gauge19=rxpGNS2!GPS_500_1, 40, 650, 370, 274,VC_settings

and

[Window01]
position=8
window_size=0.30, 0.38
visible=1
ident=15531
gauge00=rxpGNS2!GPS_500_1, 0, 0, 100, 100,Popup_Settings
window_pos= 0.660, 0.260

 

In the GNS.ini file:

[GPS_500_1.VC_Settings]
; show screen only gauge if true.
nobezel = true
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; auto-resize dimension (width,height)
refsize =
; left mouse button popup ident  (ex: GPS_PANEL or 225).
popleft = 15531
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright =

[GPS_500_1.Popup_Settings]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; auto-resize dimension (width,height)
refsize =
; left mouse button popup ident  (ex: GPS_PANEL or 225).
popleft = 15531
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright =

  • Like 2

Bert

Share this post

Link to post
Share on other sites

frmeyer    1

frmeyer
Posted (edited)

hi Bert

do have to add or replace this in RealityXP.GNS

[GPS_500_2]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 2
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = false
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = false
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars).
UseLegacyVars = false
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice =
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GPS_500_2.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; auto-resize dimension (width,height)
refsize =
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popleft =
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

 

with this here

[GPS_500_1.VC_Settings]
; show screen only gauge if true.
nobezel = true
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; auto-resize dimension (width,height)
refsize =
; left mouse button popup ident  (ex: GPS_PANEL or 225).
popleft = 15531
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright =

[GPS_500_1.Popup_Settings]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; auto-resize dimension (width,height)
refsize =
; left mouse button popup ident  (ex: GPS_PANEL or 225).
popleft = 15531
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright =

thanks

Edited by muller23

Share this post

Link to post
Share on other sites

Bert Pieke    7,585

Bert Pieke
Posted

Just add my piece.. no idea why you have GPS 500_2 settings.. but I'm reasonably sure they will not interfere.  Maybe JeanLuc can elaborate..

Bert

Share this post

Link to post
Share on other sites

frmeyer    1

frmeyer
Posted
1 hour ago, Bert Pieke said:

Just add my piece.. no idea why you have GPS 500_2 settings.. but I'm reasonably sure they will not interfere.  Maybe JeanLuc can elaborate..

GPS 500_2 settings. is from my ini file

Share this post

Link to post
Share on other sites

Bert Pieke    7,585

Bert Pieke
Posted
Just now, muller23 said:

GPS 500_2 settings. is from my ini file

Understood.. just add my sections and let me know how it works!

Bert

Share this post

Link to post
Share on other sites

frmeyer    1

frmeyer
Posted

not yet, i replaced the the files in panel.cfg

 

and added the other once in the ini after

only the pop up is working not the real one ,look add the ini

[GPS_500_2]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 2
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = false
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = false
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars).
UseLegacyVars = false
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice =
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GPS_500_2.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; auto-resize dimension (width,height)
refsize =
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popleft =
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

[GNS_530_2]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 2
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = false
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars).
UseLegacyVars = false
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice =
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GNS_530_2.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; auto-resize dimension (width,height)
refsize =
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popleft =
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

[GNS_530_1]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = false
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars).
UseLegacyVars = false
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice =
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GNS_530_1.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; auto-resize dimension (width,height)
refsize =
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popleft =
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

[GPS_500_1.VC_Settings]
; show screen only gauge if true.
nobezel = true
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; auto-resize dimension (width,height)
refsize =
; left mouse button popup ident  (ex: GPS_PANEL or 225).
popleft = 15531
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright =

[GPS_500_1.Popup_Settings]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; auto-resize dimension (width,height)
refsize =
; left mouse button popup ident  (ex: GPS_PANEL or 225).
popleft = 15531
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright =

[GPS_500_1]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = false
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = false
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars).
UseLegacyVars = false
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice =
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GPS_500_1.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; auto-resize dimension (width,height)
refsize =
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popleft =
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

 

that one is the panel.cfg

// Panel Configuration file
// RealAir Simulations Beechcraft Turbine Duke V2 2014 Update
// Panel and Gauge Programming by Sean Moloney
// Copyright (c) 2014 RealAir Simulations

// ===============================================================================
// IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN
// BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY
// EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY
// VALUE FROM 'Window03' TO 'Window 09'.
// ===============================================================================

[Window Titles]
Window00=Main Panel
Window01=GPS
Window02=Blank

[Window00]
file=2D_Help.bmp
size_mm=1024, 95
position=6
BACKGROUND_COLOR=0,0,0
visible=1
ident=MAIN_PANEL

[Window01]
position=8
window_size=0.30, 0.38
visible=1
ident=15531
gauge00=rxpGNS2!GNS_530_2, 0, 0,100,100
window_pos= 0.660, 0.260

[Window02]
size_mm=1,1
position=0
visible=0
ident=15600
BACKGROUND_COLOR=0,0,0
gauge00=RASDuke!Blank, 0, 0, 1, 1

[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$RAS_Duke_CFG
background_color=1,1,1

gauge01=Config!Options, 1020, 1023, 1, 1
gauge02=Config!RealView, 1021, 1023, 1, 1
gauge03=Config!RadioLayout, 1027, 1023, 1, 1

gauge04=RASDuke!InitVars, 1022, 1023, 1, 1
gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1
gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1
gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1

gauge08=RASDuke!NavCom1, 1, 2, 509, 61
gauge09=RASDuke!NavCom2, 1, 64, 509, 61
gauge10=RASDuke!ADF, 4, 127, 332, 49
gauge11=RASDuke!Xpndr, 7, 243, 305, 57
gauge12=RASDuke!Autopilot, 5, 177, 292, 62
gauge13=RASDuke!DME, 4, 305, 256, 46
gauge14=RASDuke!KA285_Annun, 512,2,337,108
gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245
gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259
gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86
gauge18=RASDuke!Master_Warn, 893, 1, 130, 129

// ===============================================================================
// IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN
// BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE
// IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY
// CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22'
// ===============================================================================

gauge19=rxpGNS2!GNS_530_2, 1,607,502,416
gauge20=RASDuke!Blank, 0, 0, 1, 1

gauge21=RASDukeTv2_Sound!Sound, 1,1,2,2,./SimObjects/Airplanes/RealAir Duke Turbine V2/Panel/Sound/RASDukeTv2_Sound.ini
gauge22=RASDuke!Sound_Manager, 1,1,3,3

gauge23=RASDuke!Pressurisation, 1024, 1023, 1, 1
gauge24=Config!ModelOptions, 1020, 1023, 1, 1



Day=255,255,255
Night=225,117,89
Luminous=200,200,101

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

 

thanks

Share this post

Link to post
Share on other sites

Bert Pieke    7,585

Bert Pieke
Posted

You did not make the changes to the panel.cfg file that I suggested you make..

Bert

Share this post

Link to post
Share on other sites

frmeyer    1

frmeyer
Posted

ok,this is when real xp is loaded

// Panel Configuration file
// RealAir Simulations Beechcraft Turbine Duke V2 2014 Update
// Panel and Gauge Programming by Sean Moloney
// Copyright (c) 2014 RealAir Simulations

// ===============================================================================
// IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN
// BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY
// EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY
// VALUE FROM 'Window03' TO 'Window 09'.
// ===============================================================================

[Window Titles]
Window00=Main Panel
Window01=GPS
Window02=Blank

[Window00]
file=2D_Help.bmp
size_mm=1024, 95
position=6
BACKGROUND_COLOR=0,0,0
visible=1
ident=MAIN_PANEL

[Window01]
position=8
window_size=0.30, 0.38
visible=1
ident=15531
gauge00=rxpGNS2!GNS_530_2, 0, 0,100,100
window_pos= 0.660, 0.260

[Window02]
size_mm=1,1
position=0
visible=0
ident=15600
BACKGROUND_COLOR=0,0,0
gauge00=RASDuke!Blank, 0, 0, 1, 1

[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$RAS_Duke_CFG
background_color=1,1,1

gauge01=Config!Options, 1020, 1023, 1, 1
gauge02=Config!RealView, 1021, 1023, 1, 1
gauge03=Config!RadioLayout, 1027, 1023, 1, 1

gauge04=RASDuke!InitVars, 1022, 1023, 1, 1
gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1
gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1
gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1

gauge08=RASDuke!NavCom1, 1, 2, 509, 61
gauge09=RASDuke!NavCom2, 1, 64, 509, 61
gauge10=RASDuke!ADF, 4, 127, 332, 49
gauge11=RASDuke!Xpndr, 7, 243, 305, 57
gauge12=RASDuke!Autopilot, 5, 177, 292, 62
gauge13=RASDuke!DME, 4, 305, 256, 46
gauge14=RASDuke!KA285_Annun, 512,2,337,108
gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245
gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259
gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86
gauge18=RASDuke!Master_Warn, 893, 1, 130, 129

// ===============================================================================
// IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN
// BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE
// IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY
// CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22'
// ===============================================================================

gauge19=rxpGNS2!GNS_530_2,40,650,370,274
gauge20=RASDuke!Blank, 0, 0, 1, 1

gauge21=RASDukeTv2_Sound!Sound, 1,1,2,2,./SimObjects/Airplanes/RealAir Duke Turbine V2/Panel/Sound/RASDukeTv2_Sound.ini
gauge22=RASDuke!Sound_Manager, 1,1,3,3

gauge23=RASDuke!Pressurisation, 1024, 1023, 1, 1
gauge24=Config!ModelOptions, 1020, 1023, 1, 1



Day=255,255,255
Night=225,117,89
Luminous=200,200,101

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

http://www.mediafire.com/file/6w95pb823djiw6s/fits in.jpg

but inside no functions or the g500 buttons  ,only when i pop up the unit works ,is there any trick to fit the whole gns 530 in there

thanks

 

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...