July 5, 20187 yr Author Yes I have tried that on 2 computers. I use windows extract but I do not even get the extract option when right-clicking. Never had a problem before with this. Did you try to extract the file? Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
July 5, 20187 yr Commercial Member 45 minutes ago, Petermuc3 said: Yes I have tried that on 2 computers. I use windows extract but I do not even get the extract option when right-clicking. Never had a problem before with this. Did you try to extract the file? Have just uploaded new zip file with a different name click Download link Gerald R https://www.multicrewxp.com
July 5, 20187 yr Author Thanks Gerald, I was able to extract that one. Peter Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
July 5, 20187 yr Commercial Member 42 minutes ago, Petermuc3 said: Thanks Gerald, I was able to extract that one. Peter OK, let us know if FSL A320 or A319 require any attention. Gerald R https://www.multicrewxp.com
July 6, 20187 yr Author I only made a short test on the ground. I reinstalled the newest A320X on a different volume as I ran out of space on my systemdisk. F/O is not able to handle heading/v/s weather radar engine IGN/Start switch Thanks for the help Peter Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
July 8, 20187 yr Other commands not working: t cas alt range above/below (sets alt rptg to off instead) disarm spoilers. Thank you, Roman Cheers, Roman Heriban
July 10, 20187 yr Commercial Member On 7/8/2018 at 11:21 PM, sbs9 said: Other commands not working: t cas alt range above/below (sets alt rptg to off instead) disarm spoilers. Thank you, Roman Unzip this file then replace "mcfslA3X.dll in \Prepar3D v4\MCE dlls\ folder. Issues fixed. Also added ability to control Radio 1 (captain's radio set) Nav1, Nav2, Marker, Adf1 and Adf2 buttons for the purpose of identification. I mean using these commands that are already available for other aircraft. Identify nav one listen to markers Identify adf one stop ident nav one stop listening to markers. etc.... Gerald R https://www.multicrewxp.com
July 10, 20187 yr Commercial Member On 7/6/2018 at 2:47 PM, Petermuc3 said: I only made a short test on the ground. I reinstalled the newest A320X on a different volume as I ran out of space on my systemdisk. F/O is not able to handle heading/v/s weather radar engine IGN/Start switch Thanks for the help Peter Issues fixed using this replacement dll HDG and VS working here. Perhaps Roman (sbs9) can confirm. Gerald R https://www.multicrewxp.com
July 10, 20187 yr Thank you, Gerald, outstanding support as always! PNF is now able to perform the whole after landing flow, outstanding! Well, there is one thing I must still do myself - switching off PWS 🙂 I prefer to do critical things myself, thus I use FCUsupport=0 parameter. Maybe I can allow Will to bother with FCU the next flight, we'll see 😉 Roman Cheers, Roman Heriban
July 12, 20187 yr Author Thanks Gerald, is working fine here also. Heading/V/S sometimes yes sometimes no, but that might be my setup. For the time beiing I am only flying the A320X. Funny thing is that the F/O behaves different using IAE or CFM model. In my "runway entry procedure" I have "landing lights on", F/O does that without a problem in the IAE variant, in the CFM she/he moans "not a robot..." and does not turn the landing lights on. Peter Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
July 12, 20187 yr Commercial Member 22 minutes ago, Petermuc3 said: Thanks Gerald, is working fine here also. Heading/V/S sometimes yes sometimes no, but that might be my setup. For the time beiing I am only flying the A320X. Funny thing is that the F/O behaves different using IAE or CFM model. In my "runway entry procedure" I have "landing lights on", F/O does that without a problem in the IAE variant, in the CFM she/he moans "not a robot..." and does not turn the landing lights on. Peter In case the flow for CFM is damaged with some invisible character, suggest the following... Go to \My Documents\Multi Crew Experience\Myvoicescripts\Copilot\Aircraft\FSLabs A320 IAE folder Copy the flow "runway entry procedure", then paste it to \My Documents\Multi Crew Experience\Myvoicescripts\Copilot\Aircraft\FSLabs A320 CFM, overwriting existing one. If editing flows directly, be advised only "Windows Notepad" application that ships with all Windows versions should be used. We have come across issues caused by some users relying on Notepad++, which inserts some invisible characters that cause MCE not to see the end of lines or things like that. Same for editing checklists. Gerald R https://www.multicrewxp.com
July 12, 20187 yr Author Thanks Gerald, I tried it but no success. Peter Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
July 16, 20187 yr Author The A319X seems to be a complete different aircraft. Unfortunately the F/O can only handle a few things; no Overhead, no FCU, not weather radar, flaps yes but wrong, ground cannot open/close doors. Peter Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
July 16, 20187 yr Commercial Member 17 minutes ago, Petermuc3 said: The A319X seems to be a complete different aircraft. Unfortunately the F/O can only handle a few things; no Overhead, no FCU, not weather radar, flaps yes but wrong, ground cannot open/close doors. Peter Maybe MCE not identifying it properly. Open "aircraft.cfg" for A319 and report whatever names have been assigned in those fields [fltsim.0] sim=what_text_do_you_read_here ui_createdby=what_text_do_you_read_here ui_manufacturer=what_text_do_you_read_here Thanks Gerald R https://www.multicrewxp.com
July 16, 20187 yr Author sim = A319 ui_createdby= Flight Sim Labs ui_manufacturer=Airbus Peter Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
Archived
This topic is now archived and is closed to further replies.