Jump to content

Sign in to follow this  
Gabe777

60 FPS lock - internal or external ?

Recommended Posts

Old and tired topic, but when I use P3Dv4.3 settings to:

Unlimited + Vert Sync ON + TB ON

 

.... the fps still goes up and down as high as mid seventies ?!! It seems incapable of maintaining a max of 60 for strange reason.

 

So, would it better to use nVidia inspector to set 60 fps and vert sync ON ?

I know this is the best solution for limiting to 30, but what about 60 ?

And yes, I do keep 60 fps and do not wish to use 30.

 

Thnx

Share this post


Link to post

Perhaps I’m not understanding this correctly but you appear to be complaining of too high frame rates. Just forget the numbers and enjoy the sim.


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor.
Cheadle Hulme Weather

Share this post


Link to post
4 hours ago, Gabe777 said:

Old and tired topic, but when I use P3Dv4.3 settings to:

Unlimited + Vert Sync ON + TB ON

 

.... the fps still goes up and down as high as mid seventies ?!! It seems incapable of maintaining a max of 60 for strange reason.

 

So, would it better to use nVidia inspector to set 60 fps and vert sync ON ?

I know this is the best solution for limiting to 30, but what about 60 ?

And yes, I do keep 60 fps and do not wish to use 30.

 

Thnx

Hi Gabe-

Try this. Uncheck Vsync/TB, leave unlimited on.

Download Rivatuner here. Set framerate limit to 60fps.

See how that works for you.

Cheers,

Mark

Share this post


Link to post

If your fps are going up and down, your system is not capable of maintaining 60fps. You can lock it at 60 all you want internally or externally - if your system cannot do it- that's it.

If it looks good, turn off the fps counter and enjoy the flight ut I'd venture a guess that if your fps are going up and down you are also getting stutters.

Vic


 

P3D#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 2080ti 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
P3D#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

The issue is not maintaining 60. It is that, even if Vert Sync is ON, my frames can exceed 60. Sometimes as high as 80.

Seems as though P3D vert sync is not really working as it should.

Share this post


Link to post
On 12/31/2018 at 4:05 PM, newtie said:

Hi Gabe-

Try this. Uncheck Vsync/TB, leave unlimited on.

Download Rivatuner here. Set framerate limit to 60fps.

See how that works for you.

Cheers,

Mark

So Rivatuner better than nVidia inspector ?

 

Thnx.... I guess I will try it.

 

P3D vert sync seems busted to me.

Share this post


Link to post

I thought RivaTuner was for AMD cards only. I could be wrong.


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor.
Cheadle Hulme Weather

Share this post


Link to post
On 12/31/2018 at 4:22 AM, Gabe777 said:

Old and tired topic, but when I use P3Dv4.3 settings to:

Unlimited + Vert Sync ON + TB ON

 

.... the fps still goes up and down as high as mid seventies ?!! It seems incapable of maintaining a max of 60 for strange reason.

 

So, would it better to use nVidia inspector to set 60 fps and vert sync ON ?

I know this is the best solution for limiting to 30, but what about 60 ?

And yes, I do keep 60 fps and do not wish to use 30.

 

Thnx

What is your monitor refresh rate?


Matt Wilson

Share this post


Link to post
6 hours ago, Gabe777 said:

So Rivatuner better than nVidia inspector ?

For me, yes. The Inspector FPS limiter worked sometimes, sometimes not.

Rivatuner works differently and at a lower resource using level. Google it for a further explanation.

Cheers,

Mark

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  
×
×
  • Create New...