January 10, 20206 yr happy new year to all. While the x-mas break i´ve build my A-320 homecockpit. When i was finished few days ago i started my P3D PC again and everything seems as usual before. But after 1 Minute the FPS starts to "switch" from 30 to 28 every second. Really, you can wind your clock on this. It´s really like a ticking clock. 30..28..30...28..30..28. The FPS are limited to 30. I´ve changed nothing of the setup of my P3D PC. The only change is that is use a 42"TV-screen at a resolution of 1920 x 1080 which is the same resolution as i used with my normal PC-Monitor before. I allready have cleared the shadercash, sceneryindex and i´ve deleted the P3D-config and builded a new one. No change. The weird thing is that it doesn´t matter if i change my graphicsettings in P3D. Even if i put everything to lowest this "ticking" of the FPS apears. If i unlimit the FPS with lower settings i get 130 FPS and the tiking then is 130 128 130 128. The outcome of this clocklike FPS drop is that i have a precise stutter in P3D every second. Like a hickup. My System is an overclocked I9 9700K, HT off, no AM, RTX 2080. And before x-mas my sim was running as smooth as butter with high settings. It even makes no difference at which airport or with which add-on active or not. Does anyone have a clue what could be the reason for this FPS "ticking". Edited January 10, 20206 yr by BerndB typo Bernd P3D V6 - PC spec: Intel i9-9900 overclocked 5 GHz HT off, 32 GB RAM, GPU Nvidia RTX3090 24GB, 2xM2 SSD, Skalarki HomeCockpit and Jeehell FMGS on a dedicated Server, PF3 for ATC, MCE, GSX, EFB, AS+ASCA+ENV and OrbX
January 10, 20206 yr 2 hours ago, BerndB said: The FPS are limited to 30. I´ve changed nothing of the setup of my P3D PC. The only change is that is use a 42"TV-screen at a resolution of 1920 x 1080 which is the same resolution as i used with my normal PC-Monitor before. I allready have cleared the shadercash, sceneryindex and i´ve deleted the P3D-config and builded a new one. No change. The weird thing is that it doesn´t matter if i change my graphicsettings in P3D. Even if i put everything to lowest this "ticking" of the FPS apears. If i unlimit the FPS with lower settings i get 130 FPS and the tiking then is 130 128 130 128. The outcome of this clocklike FPS drop is that i have a precise stutter in P3D every second. Like a hickup. "The only change ..." I'd start looking there for the problem/answer. BTW, 9700s don't have HyperTreading. -J 13700KF | RTX 4090 @ 1440 | 64GB DDR5 | 2 x 1TB SSDs | 1TB M.2 NVMe
January 10, 20206 yr Are you running with the native resolution of your monitor? Edited January 10, 20206 yr by micstatic edit 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
January 10, 20206 yr As you guess, it is pretty word not allowed sure related to the use of the TV instead of the monitor. To make this sure, simply put your monitor back once to see if this cures the hickups. If yes, you can start with trying to find why this TV results in a hickup. If the hickup remains after going back to the monitor, something else is wrong... I guess it is somehow related to what you use in your Prepar3d settings, your nVidia profile and the refresh rate of the TV vs. refresh rate of the monitor. Question 1: are TV and monitor connected with the same cable? Question 2: observe the NCP when switching from the monitor to the TV, what general settings are automatically adjusted? Greetings, Chris AMD Ryzen 7 9800X3D, 2x32GB DDR5 6000MT/s RAM, MSI RTX 4090 Ventus 3X, Windows 11 Home, MSFS2024
January 10, 20206 yr 35 minutes ago, Twenty6 said: "The only change ..." I'd start looking there for the problem/answer. BTW, 9700s don't have HyperTreading. According to his signature, he uses a 9900K, not a 9700K, guess it was a typo... Greetings, Chris AMD Ryzen 7 9800X3D, 2x32GB DDR5 6000MT/s RAM, MSI RTX 4090 Ventus 3X, Windows 11 Home, MSFS2024
January 10, 20206 yr Desktop wallpaper slideshow? I had an inexplicable stutter every 10 seconds at one point. Turned out to be the slideshow even though the sim was in (simulated) full screen so the desktop was entirely covered. Use you CPU and GPU monitors to ser if you can find an underlying culprit for a 1 second tick. [email protected] - ROG Strix Z790-E - 2X16Gb G.Skill Trident DDR5 6400 CL32 - MSI RTX 4090 Suprim X - WD SN850X 2 TB M.2 - XPG S70 Blade 2 TB M.2 - MSI A1000G PCIE5 1000 W 80+ Gold PSU - Liam Li 011 Dynamic Razer case - 58" Panasonic TC-58AX800U 4K - Pico 4 VR HMD - WinWing HOTAS Orion2 MAX - ProFlight Pedals - TrackIR 5 - W11 Pro (Passmark:12574, CPU:63110-Single:4785, GPU:50688)
January 11, 20206 yr Author 9 hours ago, AnkH said: According to his signature, he uses a 9900K, not a 9700K, guess it was a typo… It was indeed a typo, but anyway i found the cause and the issue is gone. It was the last update of GSX. I´am using a lua script from captpero which semi automates the GSX process from refuling to Boarding and vice versa and add cabin announcements etc. It seems that the script was damaged by the latest GSX update somehow. I´ve reinstalled this script and everything is fine again. Thank you all for your ideas and hints. Cheers Bernd P3D V6 - PC spec: Intel i9-9900 overclocked 5 GHz HT off, 32 GB RAM, GPU Nvidia RTX3090 24GB, 2xM2 SSD, Skalarki HomeCockpit and Jeehell FMGS on a dedicated Server, PF3 for ATC, MCE, GSX, EFB, AS+ASCA+ENV and OrbX
Archived
This topic is now archived and is closed to further replies.