UGCX Scenery Updates Slow

[BillGradwell 1]

Hello Support

Virtually everytime UGCX requires to update the scenery folder when you start P3Dv4.5 or P3Dv5 

Takes a long time to update. My PC and internet connection is on top end  

Seems to take extra long when getting to the Orbx Vector files

Regards Bill Gradwell

[Manuel82 147]

Hey Bill,

Question, Can you open your Ultimate Ground Crew X.INI file using Notepad, located here:

C:\Users\<username>\AppData\Roaming\Ultimate Ground Crew X

And can you tell us what setting you have for these two entries under the [UGCX] section?

BGLFileSizeLimit=???

LogScenRdrDetails=???

ReadDeActScenAreas=???

How many GB? you have of vector data?

Cheers,

Manuel

 

[byork 2,258]

Orbx Vector is quite huge.

But you should be prompted if you want to re-load the scenery database if UGCX detects your scenery has changed.... is that not happening?  Are you not being asked if you want to regenerate the scenery database?

 

 

Edited June 23, 2020 by byork

[DWadsworth 13]

Guys, my problem is that the scenery is NOT being updated, even though I have edited several .bgls.  The log shows that the custom scenery add-on is detected, but the .bgls are not being read.  Secondly, UGCX marshalling could not find the North Cargo parking at DD KSEA. 

BGLFileSizeLimit=5

LogScenRdrDetails=0

ReadDeActScenAreas=1

Log file:

------------------------ INITIALIZATING FS MODULE ------------------------ 
            It's a supported Flight Simulator:        [11]...
            Hooking to the Flight Simulator's MAIN window procedure...
            Registering CUSTOM windows messages...
            Reading the INITIALIZATION file...
            Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths...
            Reading settings from the FSX.CFG or PREPAR3D.CFG file located here: 
            C:\Users\dbw93\AppData\Roaming\Lockheed Martin\Prepar3D v5\Prepar3D.cfg 
            The Flight Simulator's frame rate LIMIT is 0 fps...
            **WARNING!** - The module has detected that your 'ADVANCED ANIMATIONS' setting is currently OFF!, this could affect the ramp agents movements!
            Creating our timer...
            Current language ID:    [409]    
            Current sound pack:         US        
            Retrieving UGCX module's version...
            Running UGCX module's version: Version: 2.0.0.0
            Attempting to connect to the Flight Simulator...
            CONNECTED! to Flight Simulator...
            Mapping Flight Simulator's events...
            Setting up data definitions...
            Registering delayed events...
            Initializating scenery reader system...
            Verifying the Flight Simulator's SCENERY configuration...
            Reading the SCENERY.CFG file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\Scenery.cfg]  
            Reading the ADD-ONS.CFG file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\add-ons.cfg]  
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\12bPilot\SODE\P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\Aerosoft\Aerosoft CRJ Professional\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\P3V5 Orbx Library\p3dv5\Global BASE Pack\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\P3V5 Orbx Library\p3dv5\Global Buildings HD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\P3V5 Orbx Library\p3dv5\Global openLC North America\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\P3V5 Orbx Library\p3dv5\Orbx Libraries\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\P3V5 Orbx Library\p3dv5\Orbx ObjectFlow\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\AIG-AIM\AIGAIM - OCI\OCI-Configuration\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [F:\P3V5 Orbx Library\p3dv5\Global Vector\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the ADD-ONS.CFG file, located in: 
            [C:\Users\dbw93\AppData\Roaming\Lockheed Martin\Prepar3D v5\add-ons.cfg]  
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Cloudberry - Oakland KOAK\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Custom Scenery\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Flightbeam - KDEN\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Flightbeam - KPDX\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Flightbeam - KSFOHD\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FsDreamTeam KDFW\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FsDreamTeam KIAH\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FsDreamTeam KLAS\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FsDreamTeam KLAX_V2\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FsDreamTeam KMEM\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FsDreamTeam KORDV2\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FSUIPC6\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Global_AI_Ship_Traffic_V2\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Seattle X\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\T2G KMCO\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FeelThere EJets\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MCE\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Navigraph Simlink\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\RAASPRO\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Spotlights\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\UGCX\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\AI Lights Reborn Professional Edition\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\ActiveSkyP5\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FsDreamTeam Addon Manager\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Seattle City X\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\SXAD HOBBY_P3Dv5\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\SimElite Solutions Time Zone Fixer\add-on.xml]  
                    This is a VALID! add-on.xml file...
                    SCENERY component detected!...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\SODE\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'ADD-ON.XML' file, located in: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\FsDreamTeam Exclude\add-on.xml]  
                    This is a VALID! add-on.xml file...
            Reading the 'SCENERY_ADD-ONS.XML' file, located in: 
            [C:\ProgramData\Lockheed Martin\Prepar3D v5\scenery_add-ons.xml]  
            Unloading the scenery index from memory...
            Updating the INITIALIZATION file...
            Creating aircraft's profile FONT...
            Module's initialization sequence COMPLETED!
------------------------------------------------------------------------------- 
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\md-83-88.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\dbw93\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\MaddogX83.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
--------------------------- FLIGHT PLAN FILE INFORMATION --------------------------- 
            Flight plan's file path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Files\VTS 8320 Taxi.fxml] 
            Event's type: FLIGHT PLAN - LOADED 
            Aircraft's Model Name: [Fly The Maddog X MD-83 - Everts Air Cargo (N965CE | 2013)] 
------------------------------------------------------------------------------- 
        GPS System - Nearest airport's ICAO ID: [PAFA]...
        Checking for updates, contacting FS2Crew server... 
        Updates check COMPLETED!... 
----------------------- UGCX API ----------------------- 
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- 
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xgs 
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xwb 
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Starting the speech recognition's engine...
                Starting the voice recognition's engine...
                Language ID: 409...
                Creating the ISpRecognizer object...
                Creating the ISpRecoContext object...
                Defining the SR notification callback...
                Setting SR event types...
                Creating the ISpAudio object...
                Setting the input stream for the SR...
                Activating the SR engine...
                Creating the ISpRecoGrammar object...
                Loading the specified CFG grammar file...
                Activating the rule ID: 1...
                The voice recognition's engine has been STARTED...
        Starting the Text-To-Speech engine...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
----------------------- LOADING SCENERY AND GRAMMAR ----------------------- 
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
        Searching for the NEAREST airport...
        The NEAREST airport's ID:        PAFA 
        Located at the Region's ID:         
        The NEAREST airport's BGL file's path is: 
        F:\Lockheed Martin\Prepar3D v5\Scenery\0101\scenery\APX08080.bgl 
        Searching for the CURRENT parking's information...
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading the sound pack based on the CURRENT region and language: [US]... 
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xgs 
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xwb 
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Loading the speech recognition's grammar...
        DEACTIVATING the grammar... 
        Retrieving a handle to the PB ROUTE NAMES dynamic rule... 
        Adding ALL airport's items to the loaded CFG grammar... 
        Adding ALL dialogues to the loaded CFG grammar... 
        Commit grammar changes... 
        ACTIVATING the grammar... 
        Loading process has been COMPLETED!
------------------------------------------------------------------------------- 
------------------------ SIMULATION STARTED ------------------------ 
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\md-83-88.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\dbw93\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\MaddogX83.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
            Aircraft's Model Name: [Fly The Maddog X MD-83 - Everts Air Cargo (N965CE | 2013)] 
------------------------------------------------------------------------------- 
------------------------ SIMULATION STOPPED ------------------------ 
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
------------------------ SIMULATION STARTED ------------------------ 
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\md-83-88.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\dbw93\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\MaddogX83.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
            Aircraft's Model Name: [Fly The Maddog X MD-83 - Everts Air Cargo (N965CE | 2013)] 
------------------------------------------------------------------------------- 
------------------------ SIMULATION STOPPED ------------------------ 
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
------------------------ SIMULATION STARTED ------------------------ 
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\md-83-88.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\dbw93\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\MaddogX83.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
            Aircraft's Model Name: [Fly The Maddog X MD-83 - Everts Air Cargo (N965CE | 2013)] 
------------------------------------------------------------------------------- 
        GPS System - Nearest airport's ICAO ID: [KSEA]...
            The Airport's Chart Viewer window has been CLOSED!...
        The NEAREST AIRPORT is now more than 3.0 nm AWAY! 
----------------------- UGCX API ----------------------- 
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- 
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xgs 
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xwb 
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Starting the speech recognition's engine...
                Starting the voice recognition's engine...
                Language ID: 409...
                Creating the ISpRecognizer object...
                Creating the ISpRecoContext object...
                Defining the SR notification callback...
                Setting SR event types...
                Creating the ISpAudio object...
                Setting the input stream for the SR...
                Activating the SR engine...
                Creating the ISpRecoGrammar object...
                Loading the specified CFG grammar file...
                Activating the rule ID: 1...
                The voice recognition's engine has been STARTED...
        Starting the Text-To-Speech engine...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
----------------------- LOADING SCENERY AND GRAMMAR ----------------------- 
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
        Searching for the NEAREST airport...
        The NEAREST airport's ID:        KSEA 
        Located at the Region's ID:         
        The NEAREST airport's BGL file's path is: 
        C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Seattle X\Seattle X\scenery\Seattle-Tacoma Intl KSEA.BGL 
        Searching for the CURRENT parking's information...
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading the sound pack based on the CURRENT region and language: [US]... 
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xgs 
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xwb 
                        F:\Lockheed Martin\Prepar3D v5\Ultimate Ground Crew X\SoundSets\US.xsb 
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Loading the speech recognition's grammar...
        DEACTIVATING the grammar... 
        Retrieving a handle to the PB ROUTE NAMES dynamic rule... 
        Adding ALL airport's items to the loaded CFG grammar... 
        Adding ALL dialogues to the loaded CFG grammar... 
        Commit grammar changes... 
        ACTIVATING the grammar... 
        Loading process has been COMPLETED!
------------------------------------------------------------------------------- 
------------------------ SIMULATION STOPPED ------------------------ 
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
------------------------ SIMULATION STARTED ------------------------ 
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- LOADED AIRCRAFT INFORMATION --------------------------- 
            CURRENT aircraft's AIR file path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\md-83-88.air] 
            Reading the AIRCRAFT's PROFILE path: 
            [C:\Users\dbw93\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\MaddogX83.cfg] 
            The AIRCRAFT's PROFILE has been read COMPLETELY!
            Reading the AIRCRAFT.CFG file's path: 
            [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX83\aircraft.cfg] 
            The AIRCRAFT.CFG file has been read COMPLETELY!
            Aircraft's Model Name: [Fly The Maddog X MD-83 - Everts Air Cargo (N965CE | 2013)] 
------------------------------------------------------------------------------- 
------------------------ SIMULATION STOPPED ------------------------ 
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
 

 

[BillGradwell 1]

Hello Manuel

BGLFileSizeLimit=5

LogScenRdrDetails=0

ReadDeActScenAreas=1

How many GB? you have of vector data? 

I do not know - it is the standard ORBX Vector files for both V4.5 and v5 

Cheers,

Bill Gradwell

[Manuel82 147]

9 hours ago, BillGradwell said:

BGLFileSizeLimit=5

LogScenRdrDetails=0

ReadDeActScenAreas=1

Hey Bill,

Try to set the "BGLFileSizeLimit" entry to 2, like this:

BGLFileSizeLimit=2

Let me explain, this entry tells UGCX to skip all BGL files greater than 2 MB, this is special, because most BGL files containing airport data is lower than 2 MB, in this way, the scan process can be speeded up, since, most BGL files containing vector data will be big in size, slowing down UGCX's reading process.

After modifying the UGCX.ini file, save the changes, then restart P3D, and force UGCX to rebuild scenery index files.

Cheers,

Manuel

[Manuel82 147]

Hey Dave,

12 hours ago, DWadsworth said:

 [C:\Users\dbw93\Documents\Prepar3D v5 Add-ons\Custom Scenery\add-on.xml]  
                    This is a VALID! add-on.xml file...

Which airport's ID represents this scenery area?, or a better question: Which airport's ID should UGCX be reading?.

12 hours ago, DWadsworth said:

       The NEAREST airport's ID:        PAFA 
        Located at the Region's ID:         
        The NEAREST airport's BGL file's path is: 
        F:\Lockheed Martin\Prepar3D v5\Scenery\0101\scenery\APX08080.bgl 

Seems like it's reading this airport's ID: PAFA. I think this is the wrong airport's ID right?, if that's the case, you can exclude it, in case it's not the correct airport's ID...

12 hours ago, DWadsworth said:

Secondly, UGCX marshalling could not find the North Cargo parking at DD KSEA.

Does it displays a message or error in screen telling you that it couldnt find it?, can you take a screenshot?

Cheers,

Manuel

[DWadsworth 13]

Manuel,  most of this is my fault after installing HF2.  Scenery priority seems to be hosed at the moment.  I also had some problems with ORBX after the HF2 update.  Thanks for your response.

[BillGradwell 1]

Hello Manuel

Thanks for tip. Did not work - still takes a long time to update. Remember as said my PC is no slow coach. When it hits the ORBX Vector files it stays there for some time.

Regards Bill Gradwell

[Manuel82 147]

On 6/22/2020 at 1:29 PM, BillGradwell said:

Virtually everytime UGCX requires to update the scenery folder when you start P3Dv4.5 or P3Dv5 

Takes a long time to update. My PC and internet connection is on top end  

Seems to take extra long when getting to the Orbx Vector files

We has been working on an update. I had to finally get ORBX Global Vector, and after installation, I saw why it takes sooo much time. I just modified UGCX to skip automatically all ORBX Global Vector scenery areas, so it doesn't scan it.

Manuel