November 17, 20205 yr What's the consensus on this scenery? Never thought much about it, but I find myself flying the Q400 now much more often. thanks 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
November 17, 20205 yr 1 hour ago, micstatic said: What's the consensus on this scenery? Never thought much about it, but I find myself flying the Q400 now much more often. thanks https://fselite.net/reviews/skyline-simulations-billy-bishop-toronto-city-airport-fsx-p3d-the-fselite-review/ I chose the Canadasim version and it has the best building textures IMO, but doesn't have winter ground textures. Arguably, the FSimStudios' one is the best of the three available options due to the all-season usability.Edit: Ha! I see that even MFSG created a version... Turns out that Billy Bishop Toronto City Airport is just as popular with developers as Tenerife! Edited November 17, 20205 yr by F737NG AMD Ryzen 5800X3D; MSI RTX 3080 Ti ; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440 x 1440) Fulcrum One yoke; Thrustmaster TCA Captain Pack Airbus edition; MFG Crosswind rudder pedals; miniCockpit FCU; CPFlight MCP 737; Logitech FIP x3; TrackIR MSFS; Fenix A320; A2A PA-24; HPG H145; PMDG 737-600; AIG; RealTraffic; PSXTraffic; FSiPanel; REX AccuSeason Adv; FSDT GSX Pro; FS2Crew RAAS Pro; FS-ATC Chatter
November 17, 20205 yr Author @F737NG Thanks for the reply. Is the FSimstudios one compatible with V5? I couldn't find much in terms of pictures of the Canadsim version. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
November 17, 20205 yr 42 minutes ago, micstatic said: @F737NG Thanks for the reply. Is the FSimstudios one compatible with V5? I couldn't find much in terms of pictures of the Canadsim version. Canadasim has *lots* of pictures of CYTZ over on Simmarket. It was a one-off scenery by an aspiring pilot, so there's no follow-up. It also does need some work using Airport Design Editor to exclude the default buildings. I don't know about FSimStudios' version, unfortunately. Worth asking them on their Facebook page or emailing them directly if no-one else has an answer on here. AMD Ryzen 5800X3D; MSI RTX 3080 Ti ; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440 x 1440) Fulcrum One yoke; Thrustmaster TCA Captain Pack Airbus edition; MFG Crosswind rudder pedals; miniCockpit FCU; CPFlight MCP 737; Logitech FIP x3; TrackIR MSFS; Fenix A320; A2A PA-24; HPG H145; PMDG 737-600; AIG; RealTraffic; PSXTraffic; FSiPanel; REX AccuSeason Adv; FSDT GSX Pro; FS2Crew RAAS Pro; FS-ATC Chatter
November 17, 20205 yr I highly recommend the SimAddons version, also v5 compatible. [email protected] | 32gb RAM | EVGA GTX1080 8gb | Mostly P3Dv5 (also IL2:BoX, DCS, XP11)
November 18, 20205 yr Author With SimAddons does Dynamic Lighting work? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
February 1, 20224 yr Author Wanted to circle back around on Toronto City YTZ. What's everybody using? Is SimAddons the only one working in V5? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
February 1, 20224 yr 2 hours ago, micstatic said: Wanted to circle back around on Toronto City YTZ. What's everybody using? Is SimAddons the only one working in V5? I have SimAddons version for P3Dv5 and it’s very good. Also, Ralph offers top notch support. Cheers, Pete Pete Solov - Lake in the Hills 3CK and Schaumburg Regional 06CProud AOPA Member - PPL 2001Real World Piper Cherokee Pilot
February 1, 20224 yr 4 hours ago, micstatic said: Wanted to circle back around on Toronto City YTZ. What's everybody using? Is SimAddons the only one working in V5? Bought Skyline CYTZ just the other day. Seems to work without any problems in v5.3 HF2. Will take a proper look at the scenery and share some pics this evening. AMD Ryzen 5800X3D; MSI RTX 3080 Ti ; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440 x 1440) Fulcrum One yoke; Thrustmaster TCA Captain Pack Airbus edition; MFG Crosswind rudder pedals; miniCockpit FCU; CPFlight MCP 737; Logitech FIP x3; TrackIR MSFS; Fenix A320; A2A PA-24; HPG H145; PMDG 737-600; AIG; RealTraffic; PSXTraffic; FSiPanel; REX AccuSeason Adv; FSDT GSX Pro; FS2Crew RAAS Pro; FS-ATC Chatter
February 1, 20224 yr I've been using the entire SimAddons scenery packs since the days of FSX...admittedly, the buildings are somewhat dated in P3D v5, but, the sceneries all work well with good lighting and several with sloped runways. Can't comment on the Skyline Simulations one...although I bought their KCVG a few years back...never again will I support this developer. There is a review on YouTube if you haven't already seen it (seems to have several of the same installation issues as KCVG): I really enjoy flying the Majestic Q400 into/out of CYTZ...I've been looking at the Fsimstudios as a possible upgrade (only because the SimAddons looks dated) and I like their CYVR and CYLW versions better than SimAddons (albeit, without the sloped runways).
February 1, 20224 yr Author So I bought the Skyline. Right now I would say that the Simaddons city scenery is better. But the Skyline airport itself seems more modern. Only negative with the skyline airport is the DL is a huge frame hit. Even with a 3090. So if we could blend the best of both, that would be a dream! 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
February 2, 20224 yr 11 hours ago, micstatic said: Only negative with the skyline airport is the DL is a huge frame hit Yes. VRR and a G-Sync compatible monitor make this bearable during take-offs and approaches, however, Toronto still ends up being one of the worst places performance-wise to fly in P3D. (Though to be fair, I'm running 100 AI aircraft and FT's CYYZ at the same time). Daytime is a lot better. AMD Ryzen 5800X3D; MSI RTX 3080 Ti ; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440 x 1440) Fulcrum One yoke; Thrustmaster TCA Captain Pack Airbus edition; MFG Crosswind rudder pedals; miniCockpit FCU; CPFlight MCP 737; Logitech FIP x3; TrackIR MSFS; Fenix A320; A2A PA-24; HPG H145; PMDG 737-600; AIG; RealTraffic; PSXTraffic; FSiPanel; REX AccuSeason Adv; FSDT GSX Pro; FS2Crew RAAS Pro; FS-ATC Chatter
February 2, 20224 yr Author 9 hours ago, F737NG said: Yes. VRR and a G-Sync compatible monitor make this bearable during take-offs and approaches, however, Toronto still ends up being one of the worst places performance-wise to fly in P3D. (Though to be fair, I'm running 100 AI aircraft and FT's CYYZ at the same time). Daytime is a lot better. I agree that Toronto can be tough. Though in my experience I've found YYZ tough, but the city area not as bad. The dynamic lighting for is only a hit when the aircraft is immediately at the gate area and fully under the cast of the lights. Otherwise I don't have an issue. I have a few other airports like this where developers have non optimized fx files for the DL. In many cases inibuilds issued replacement lights that completely fixed the problem. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
February 2, 20224 yr Author the other aspect missing in skyline scenery is the centerline lighting on 08, TDZ approach lighting, and the fact the other runway is now closed. How hard is it to manually add centerline and approach lighting? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
February 3, 20224 yr Author On 2/1/2022 at 3:10 AM, F737NG said: Bought Skyline CYTZ just the other day. Seems to work without any problems in v5.3 HF2. Will take a proper look at the scenery and share some pics this evening. do you have the jetways working? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
Archived
This topic is now archived and is closed to further replies.