January 4, 20215 yr what airport is this and what addons are you using? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
January 4, 20215 yr you can use https://www.scruffyducksoftware.com/airport-design-editor you will need to open the airport's scenery BGL and adjust the elevation to match the mesh surroundings. Matt NT - AUSTRALIA
January 4, 20215 yr 1 hour ago, williebarry1 said: How do I get rid of this mesh wall? https://imgur.com/a/iLfHEcE Because i seems it´s a typical elevation issue of the Airport u are using, i suggest to look at the developer forum for this specific add-on first if there is known issue or if they may have a solution. Bernd P3D V6 - PC spec: Intel i9-9900 overclocked 5 GHz HT off, 32 GB RAM, GPU Nvidia RTX3090 24GB, 2xM2 SSD, Skalarki HomeCockpit and Jeehell FMGS on a dedicated Server, PF3 for ATC, MCE, GSX, EFB, AS+ASCA+ENV and OrbX
January 4, 20215 yr 1 hour ago, jeansy said: you can use https://www.scruffyducksoftware.com/airport-design-editor you will need to open the airport's scenery BGL and adjust the elevation to match the mesh surroundings. To add to this, the ability to change the airport elevation in ADE is an advanced feature that requires the ADE ProKey (supporting development of this invaluable tool is well worth the $10). The mesh and layout of many default airports in P3Dv5 were revised/updated, and as a result the field elevation of some airports in V5 is slightly different from the elevation in FSX/P3D1-4. When you use a scenery designed for an earlier version of P3D on an airfield that has a revised field elevation in V5, you'll need to use the ADE tool to change the field elevation in the airport file (aka ADE, AFCAD, AFX) to make it match...and if there are flattens or ground polys, they may need changing too. Also, ADE puts the altitude stub file in its former default location in scenery/world/scenery, which no longer has any effect in P3Dv5. It's unclear to me whether the ALT file is needed at all now...but just in case, I move the ALT file from s/w/s to the same scenery folder as the ADE bgl file. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
January 4, 20215 yr Author 2 hours ago, micstatic said: what airport is this and what addons are you using? FTX Global https://library.avsim.net/search.php?SearchTerm=VOBL_P3Dv5&CatID=p3d5scen&Go=Search
January 4, 20215 yr It looks to be very skilfully made, with no mesh walls anywhere. Perhaps there is some added mesh with which it is not compatible. It does not need to be "fixed" with ADE.
Archived
This topic is now archived and is closed to further replies.