8 hours ago, Ray Proudfoot said:

@doublebubble, I've tried your AFCAD and traffic in and out is fine. Using the British Airways flight 15 into YSSY at 05:09 local as an example if I set the local time to 05:00 it is generated at 35,000ft 15 miles from the airport so clearly won't get down in time.

Setting the time to 04:40 it's still generated at 35,000ft but it's now 77 miles away so has time to descend and land. If you set the time too close to when aircraft are due in they won't land. They go-around and then land some time later.

I would advise you not to use the Airport View. Instead use Live Traffic with the filter option (if enabled) at the bottom turned off. That allows you to see all Ai in the sim. The BAW15 shows up as enroute and you can see its progress all the way down. Use 4x to speed things up.

I cannot see any reason why Ai won't land at YSSY but without seeing you use P3D and AIG / AIC it's hard to spot where things aren't working for you.

As a final test set YSSY to 14:45 local on Monday 13/9/21. BAW16 is due to depart at 14:50. Does it show and if you right-click on the entry in AIC can you switch to that aircraft and monitor as it taxies, takes-off and departs?

Thanks for the test Ray, followed your test advise using BA15 into YSSY and set the times as suggested, BA15 was not in flight, AIC was still showing it at WSSS, it was not generated into the sim 4x to speed things up BA15 has not moved, in fact there was no traffic at all enroute to YSSY, in Live Traffic (Live Traffic with the filter option (if enabled) at the bottom turned off) I'm not able to find this option or looking in the wrong place. As for BAW16 due to depart @ 14:50 worked perfectly followed it to wheels up, as per the Live traffic board the is not one arrival to YSSY, all departures, as I said this just not related to YSSY its at every airport I choose. there is just generated arrivals, only generated on the arrivals board but not into the sim, yes now looking at an issue with the sim itself, what ever that could be is getting way beyond my intelligence.

 Rod.

Rod,

Thanks for your post. This is baffling. Do you have any other programs running that could manipulate Ai traffic? AiFlow for example?

In P3D check Airline density slider is set to 100% please.

I’m about to go to bed. How do you feel about a Team Viewer session? If you agree can you download the software.

https://www.teamviewer.com/en/download/windows/

I’ll be back online around 09:00 UT tomorrow. It’s now 22:50 UT. Would you be available at 09:00 UT tomorrow? I’ve exhausted all questions. I need to see your P3D install running so I can check things out.

Finally, and you can be doing this whilst I sleep...

Open AIG Ai Manager and from the top menu select Flightplans - Missing Fltsim Titles.

How many entries are shown?

Now select Airports from Ai Manager and enter YSSY. How many flights and flight plans are shown? I have 6206 and 65.

What numbers do you see?

Until tomorrow.

If I may add to this.

I put exactly the same details into my Sim this morning.

The results are strange to say the least.

The aircraft (Speedbird 15) shows in Live Traffic and can be followed all the way to YSSY, where it lands.

It does NOT show in arrivals in Airport view.

The time is odd. I set the time as stated 1845Z and the plane arrives at 1916Z but that translates to 6:16 Local not 5:16 local.

If I then go to the actual airport view where I am waiting for the plane, I see it land but it then disappears.

In Live Traffic there are no parking details.

Does this help or confuse even more?

Ian

7 hours ago, Ray Proudfoot said:

Rod,

Thanks for your post. This is baffling. Do you have any other programs running that could manipulate Ai traffic? AiFlow for example?

In P3D check Airline density slider is set to 100% please.

I’m about to go to bed. How do you feel about a Team Viewer session? If you agree can you download the software.

https://www.teamviewer.com/en/download/windows/

I’ll be back online around 09:00 UT tomorrow. It’s now 22:50 UT. Would you be available at 09:00 UT tomorrow? I’ve exhausted all questions. I need to see your P3D install running so I can check things out.

Finally, and you can be doing this whilst I sleep...

Open AIG Ai Manager and from the top menu select Flightplans - Missing Fltsim Titles.

How many entries are shown?

Now select Airports from Ai Manager and enter YSSY. How many flights and flight plans are shown? I have 6206 and 65.

What numbers do you see?

Until tomorrow.

Sleep tight Ray, I use to have AIFlow installed but deleted it a week ago due to this issue I'm having, P3D Airline sliders are at 100% A Team Viewer might be the answer (I hope) as I'm getting nowhere here, I have just noticed today, I'd first they were but if I go back to using default P3D traffic (activating the default traffic bgl) and deactivate AIG I'm not seeing any default traffic spawning into the sim either, I can use a default aircraft but there is no other traffic on the ground, whether that's related to this I have now idea, if your still up for a team viewer session that's fine not that I've ever had one and don't know how to go about that.

Rod.

1 hour ago, IanHarrison said:

If I may add to this.

I put exactly the same details into my Sim this morning.

The results are strange to say the least.

The aircraft (Speedbird 15) shows in Live Traffic and can be followed all the way to YSSY, where it lands.

It does NOT show in arrivals in Airport view.

The time is odd. I set the time as stated 1845Z and the plane arrives at 1916Z but that translates to 6:16 Local not 5:16 local.

If I then go to the actual airport view where I am waiting for the plane, I see it land but it then disappears.

In Live Traffic there are no parking details.

Does this help or confuse even more?

Ian

Can't get anymore confused than I am now Ian, it's more than likely something on my side but what I have no idea now.

Rod.

2 hours ago, IanHarrison said:

If I then go to the actual airport view where I am waiting for the plane, I see it land but it then disappears.

In Live Traffic there are no parking details.

I suspect that happens when there are no suitable gates for it to park. Default YSSY by any chance?

No idea about it landing an hour later.

58 minutes ago, doublebubble said:

P3D Airline sliders are at 100% A Team Viewer might be the answer (I hope) as I'm getting nowhere here, I have just noticed today, I'd first they were but if I go back to using default P3D traffic (activating the default traffic bgl) and deactivate AIG I'm not seeing any default traffic spawning into the sim either, I can use a default aircraft but there is no other traffic on the ground, whether that's related to this I have now idea, if your still up for a team viewer session that's fine not that I've ever had one and don't know how to go about that.

Rod.

100% is great. With Team Viewer I’ll send you an invitation via email in an hour.

Check Scenery\World\Scenery for TrafficAircraft.bgl. If it’s enabled then there may be a problem with the Client version of v4. Do you have the client.msi file? Log onto your LM account and see if you can download it. Hopefully it’s available and not just the full v4.x package.

12 minutes ago, Ray Proudfoot said:

I suspect that happens when there are no suitable gates for it to park. Default YSSY by any chance?

No idea about it landing an hour later.

100% is great. With Team Viewer I’ll send you an invitation via email in an hour.

Check Scenery\World\Scenery for TrafficAircraft.bgl. If it’s enabled then there may be a problem with the Client version of v4. Do you have the client.msi file? Log onto your LM account and see if you can download it. Hopefully it’s available and not just the full v4.x package.

Morning Ray, I actually did a reinstall of the P3DV4.5 HF3 client and content yesterday in desperation, TrafficAircraft.bgl is not enabled. Team Viewer invite no problem, looking forward to it.

Rod.

Edited September 14, 20214 yr by doublebubble

Hi Rod. That will save some time. Can you enable it and check for default Ai please.

5 minutes ago, Ray Proudfoot said:

Hi Rod. That will save some time. Can you enable it and check for default Ai please.

Yep, enabled, all default are in the list, I am able to select and use it but there are no other default aircraft spawned in the sim.

Rod.

25 minutes ago, Ray Proudfoot said:

I suspect that happens when there are no suitable gates for it to park. Default YSSY by any chance?

 

No. Fully updated payware YSSY from FlyTampa.

21 minutes ago, doublebubble said:

Yep, enabled, all default are in the list, I am able to select and use it but there are no other default aircraft spawned in the sim.

Rod.

Strange. Let's see how a Team Viewer session goes. If you've installed it click on the Remote Control option on the left and send me your ID and password in a PM.

15 minutes ago, IanHarrison said:

No. Fully updated payware YSSY from FlyTampa.

Even stranger.

5 minutes ago, Ray Proudfoot said:

Strange. Let's see how a Team Viewer session goes. If you've installed it click on the Remote Control option on the left and send me your ID and password in a PM.

Even stranger.

Ok Ray.

Rod.

Rod, just to confirm your AI Manager stats look fine. If an aircraft shows up with NO PAINT it won't appear in P3D. No such instances of that with BA aircraft.

Sadly I wasn't able to resolve the problem of so few AIG Ai landing at various airports. I checked all the obvious things and Rod had them configured just fine.

In the end I had to admit defeat. I suggested he uninstall his current v4.5 and install a fresh copy to a separate folder to the previous one. I also suggested he create a user account in his own name as perhaps the default of "user" was causing an issue.

Those two actions should create new files without him losing any existing ones but I did list the files he needs to save prior to this. A basic install of v4.5 followed by FlyTampa YSSY and AIG Ai is all that is needed to get the new version running and a test can then be made. Hopefully it fixes the problem.

Check this out Ray, WHOO HOO, we're up and away AND landing, a full reinstall of P3D did the trick and I even have default traffic back, not that I'm using them, obviously there was something wrong with the aircraft side of things and I can only put it down to something within UTLive which created the problem as it was the only traffic addon I've ever used, never again. Thanks for your time.

Rod.