October 13, 20214 yr Hi, just to check if others experienced the same... Yesterday I pushed the latest "Dev" version and when I loaded the A320NX and tried to switch the batteries ON on the Overhead panel, no buttons/ switches/rotaries... were cllickable there ... I reloaded MFS, the A320NX, but nothing worked... I then decided to install the Experimental version and it worked fine. Maybe a glitch with that particular Dev version ? Edited October 13, 20214 yr by jcomm Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
October 13, 20214 yr I [very] occasionally get this with the Dev version (or the Escape menu doesn't come up). A quick reload of the aircraft usually does the trick.
October 13, 20214 yr Could it be the non-legacy click system introduced with SU5? You can turn that off somewhere in the menus. AMD Ryzen R9 9950X3D | Asus Astral RTX 5080 OC | 32 GB DDR5 6000 CL30 | 3440x1440 G-Sync | Logitech Pro Throttles Rudder Yoke Panels | Thrustmaster T.16000M FCS | TrackIR 5 | Oculus Rift S
October 13, 20214 yr Author Yep, Republic3D, that's what I thought too, and since I have set it to Legacy for quite a while, I went checking, and it was in Legacy. I even changed to the new ( post-SU5 ) setting and tried again, but still no go. Only thing that worked was installing the "Experimental" version. With that version I can click and operate everything again. Meanwhile there were probably other updates ( the Dev version is also very dynamic ) so, I'll try again tonight 🙂 Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
October 13, 20214 yr FYI, I'm flying the Dev version right now (updated it a couple of hours ago). No issues with using the mouse. Did you try the full clean install steps as per this: https://docs.flybywiresim.com/fbw-a32nx/installation/ (scroll down a bit for the clean install instructions). ...jim ASUS Prime Z790-E, Intel i9 13900K, 32Gb DDR5 Ram, Nvidia 3090 24Gb, Samsung 970 EVO Plus 500 GB and 1 TB, Samsung Odyssey G9 Ultrawide 49" G-SYNC Monitor.
October 13, 20214 yr Author Well, just downloaded the latest Dev version and all back to normal now.... Thank you guys ! Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
Archived
This topic is now archived and is closed to further replies.