November 9, 20223 yr Tried using the beta release and had an immediate issue with X-Plane 12, Cessna 172SP, Garmin 530. It won't let me switch from COM/MIC1 to COM/MIC2. It just flips it back to COM/MIC1. It also auto sets the frequency on the 530 even though I believe I have this disabled. Where is the setting(s) that control how p2atc interacts with the comms/530?
November 9, 20223 yr With last update P2ATC and beta12, I have problems with radio too. P2ATC assignet frequncy, but not accepted this frequency.
November 9, 20223 yr 3 hours ago, kevinbuckley70 said: Tried using the beta release and had an immediate issue with X-Plane 12, Cessna 172SP, Garmin 530. It won't let me switch from COM/MIC1 to COM/MIC2. It just flips it back to COM/MIC1. It also auto sets the frequency on the 530 even though I believe I have this disabled. Where is the setting(s) that control how p2atc interacts with the comms/530? Have you checked out the troubleshooting manuals. The com settings are in p2atc setup in config. The one that comes to mind is coms reverse.
November 10, 20223 yr also getting this. first flight with XP beta 12. latest beta of p2atc. toliss a319. actually, it keeps forcing ground freq onto com 1 and won't switch to the stdby. no matter what I put in stdby, it switches momentarily and then switches back. worked fine on XP beta 11. maybe the same issue? maybe not. Edited November 10, 20223 yr by Mike Berger more info
November 10, 20223 yr Commercial Member Mike, this sounds more like the A319 is not letting P2A change the frequency. Try changing the frequency in the cockpit. Dave
December 4, 20223 yr I have same issue with 2 different planes using XP12 RC2. Something keep assigning the ground frequency. Didn't have this issue with XP11. It could be a XP12 issue. The aircrafts are FlyJSim Q400 Airfoils Lab C172NG Edit : I have disabled co-pilot Option under Speech tab. Both "Respond to radio" and "change frequencies" are unchecked. Making changes in the cockpit get overridden by something. I shutdown P2A and made changes in cockpit and still something keeps overriding it. Edited December 4, 20223 yr by Sims Smith more details System Spec 1: Nvidia RTX 4090, AMD Ryzen 9 7950X3D, Res 5120x1440, HP Reverb G2System Spec 2: AMD Radeon RX 7900XT, Intel I-9 9990K, Res 3840x1080, HP Reverb G2
December 5, 20223 yr Good news! Found the issue. There is tag war with default X-Plane 12 ATC auto tuning which is constantly forcing frequency to "recommended radio freq" even if user manually change it in cockpit or P2A set it to something else. This is the case even if default XP12 ATC is not being used! Make sure untick "Auto-tune recommended frequencies" System Spec 1: Nvidia RTX 4090, AMD Ryzen 9 7950X3D, Res 5120x1440, HP Reverb G2System Spec 2: AMD Radeon RX 7900XT, Intel I-9 9990K, Res 3840x1080, HP Reverb G2
Archived
This topic is now archived and is closed to further replies.