June 24, 20232 yr Since the update I find that the TBM930 is unflyable. Throttle does not respond properly - will not go above about 30% power. I load with aircraft on the runway ready to fly (in theory). I have made no adjustments. I have tried other default aircraft with no problems. Do I need to set other controls such as mixture as an example (I don't think there is a mixture control). Anyone else having this issue? (Probably not else it would have featured). Can anyone suggest a manual for the requirements to get the aircraft underway. It worked fine prior to the update. Thanks for any feedback
June 24, 20232 yr 1 hour ago, hughbutcher said: Since the update I find that the TBM930 is unflyable. Throttle does not respond properly - will not go above about 30% power. I load with aircraft on the runway ready to fly (in theory). I have made no adjustments. I have tried other default aircraft with no problems. Do I need to set other controls such as mixture as an example (I don't think there is a mixture control). Anyone else having this issue? (Probably not else it would have featured). Can anyone suggest a manual for the requirements to get the aircraft underway. It worked fine prior to the update. Thanks for any feedback Yes1 - I have found that as well - very frustrating - but I usually just restart the whole process and it works - but very time consuming when the whole thing has to be reloaded and I should be flying
June 24, 20232 yr I just did a ground engine run on the TBM & the throttle worked perfectly. Throttle is a Honeycomb Bravo.
June 24, 20232 yr Throttle worked for me too. But I have had no luck getting click and scroll interactions working reliably today. Restarts etc, no difference. The sim is as good as unplayable for me at the moment – this issue affected every aircraft I have tried. So much for all the flying I've had planned for the weekend. 🙄
June 24, 20232 yr 16 minutes ago, lupedelupe said: But I have had no luck getting click and scroll interactions working reliably today Check your “Lens Correction” in settings. It needs to be off or what you describe occurs. -B Edited June 24, 20232 yr by btacon
June 24, 20232 yr 2 minutes ago, btacon said: Check your “Lens Correction” in settings. It needs to be off or what you describe occurs. -B Lens correction is off. I have the blue highlight so I know when something is interactive, and clicking with the highlight active I'd normally expect an action. Not so today.
June 25, 20232 yr Author Hi, Thanks for the feedback. Pleased to report that after many restarts - including a task manager generated shutdown - the aforementioned problems have gone. This includes 'white dots' which had appeared for the first time in my experience. Someone mentioned 'Lens Correction'. I checked that it had been set Off. Thanks for all replies and suggestions
Archived
This topic is now archived and is closed to further replies.