May 31, 20242 yr Tried the new 320Neo(v2) and cannot push or pull the AP knobs. I had no trouble in the previous Neo. Is there a trick I'm missing ? Jim
May 31, 20242 yr Edited subject to be more clear 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
June 1, 20242 yr You mean the knobs on fcu right? I don't have any issue with them.. I'm able to push to get the dots managed mode and pull to see the values.. Maybe your mouse settings have to be checked in assistance or control options.. Vinod Kumar i9 10900K 5.3 Ghz, RTX 3090, 32GB RAM, Win 11. Alpha-Yoke, Bravo-Throttles, TM Joystick, TM-Rudder, 48" 4K TV.
June 1, 20242 yr Commercial Member 58 minutes ago, anitelite said: Is there a trick I'm missing ? Go into Options, General Options, Accessibility, And try switching between Legacy and Lock Mode.
June 1, 20242 yr Or restart the Sim after the first load of the A320 NEO V.2.. cheers 😉 08.2024 new PC is online : ASUS ROG STRIX X670E-F GAMING WIFI Mainboard, AMD Ryzen™ 9 7950X3D Prozessor, G.Skill DIMM 64 GB DDR5-6000 (2x 32 GB) Dual-Kit, MSI GeForce RTX 4090 VENTUS 3X E 24G OC Grafikkarte, 2x WD Black SN850X NVMe SSD 4 TB - Drive C+D, WD Gold Enterprise Class 12 TB for storage HDD, Thermaltake Toughpower GF3 1000W PC - Power supply, Thermalright Phantom Spirit 120 EVO CPU Aircooler with 7 Heatpipes, Design Meshify 2 White TG Clear Tint Tower-Case, 3x 4K monitors 2x32 Samsung 1x27 LG 3840x2160, Windows11 Prof. 23H2 - now Windows11 Prof. 25H2 Flightsimulator Hardware: Honeycomb Throttle Bravo, Logitech Extreme 3D Pro, Logitech Flight Joke System, XBox Controller, some Thrustmaster stuff, Winwing CDU Panels.
June 1, 20242 yr Author ok folks. I'm needing some help here. I can easily program a simple destination into the old autopilot system in the A320Neo and the push pull knobs on the FCU function without issue. I can push or pull with the mouse and the behavior is as expected. So whats different on the V2 flavor ?? I did notice that when programming the same dep/destination on the newer V2 flight management system that the screens are a little different and that I had to clear a discontinuity, but other than that I can see no real difference. Except that I am still unable to push or pull the FCU knobs. So could I get a simple step by step on a sample flight that you've been able to successfully enter and use the FCU knobs? Maybe that's what I'm missing. Many thanks. Jim
June 3, 20242 yr If the push pull has worked on some other airbus like fbw or fenix then the issue is not with your mouse settings... For the ini320 just like any other airbus, after you program the mcdu and the init B page and after you set the initial cruise altitude, and fill out the perf page, the heading, speed and V/s windows should show --- ie managed mode.. If you pull out any of them you should be able to set a value.. Vinod Kumar i9 10900K 5.3 Ghz, RTX 3090, 32GB RAM, Win 11. Alpha-Yoke, Bravo-Throttles, TM Joystick, TM-Rudder, 48" 4K TV.
June 3, 20242 yr Pull is when cursor shows down arrow when you hover on top of that knob.. Push is up arrow.. Vinod Kumar i9 10900K 5.3 Ghz, RTX 3090, 32GB RAM, Win 11. Alpha-Yoke, Bravo-Throttles, TM Joystick, TM-Rudder, 48" 4K TV.
Archived
This topic is now archived and is closed to further replies.