April 8Apr 8 Hi, I would like to configure the "enginecuoiff" on the Honeycomb bravo, but I don't find the command to use in FS2024 command list. Any isea to help me. Thank's a lot Yves Yves SAMUEL ELLX
April 8Apr 8 Have you searched for 'Fuel Cutoff' or similar? Ryzen 7 9800x3D @5.2GHz; ASUS X670-P Motherboard; nVidia 4080 (factory o/c); 32G 5600MHz DDR5 SDRAM; Pimax Crystal Light VR Headset; Quest 3 VR Headset
April 8Apr 8 I haven't tried them, but two on/off command pairs seem worth a try: Toggle Engine 1 (etc) Fuel Valve Set Engine 1 (etc) Fuel Valve In your settings, just type in Search 'Fuel' and you should see all of the options Ryzen 7 9800x3D @5.2GHz; ASUS X670-P Motherboard; nVidia 4080 (factory o/c); 32G 5600MHz DDR5 SDRAM; Pimax Crystal Light VR Headset; Quest 3 VR Headset
April 9Apr 9 Have you checked in the 777 SDK what variables and events are avaliable? I know there's one for the FSX and P3D versions. I guess there's one for the MSFS ones. Edited April 9Apr 9 by Luis Hernandez Best regards,Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9! Lossless Scaling for all my sims. What a godsend...Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there .VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
April 10Apr 10 On 4/9/2026 at 10:20 AM, Luis Hernandez said: Have you checked in the 777 SDK what variables and events are avaliable? I know there's one for the FSX and P3D versions. I guess there's one for the MSFS ones. Hola Luis, You might know so I'll ask in this thread: I've not found a way to save a configuration where after 777 launches to a gate or ramp the parking brake will be on, then turns itself off. That is despite my saving a default configuration with the parking brake on. Is the parking brake on and doesn't turn itself off for you? Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
April 11Apr 11 On 4/9/2026 at 1:20 PM, Luis Hernandez said: Have you checked in the 777 SDK what variables and events are avaliable? I could finally check: there is one in your 777 folder\Documentation\SDK\PMDG_777X_SDK.h. All the variables are there. I guess you're looking for these ones: // Pedestal - Control Stand - Fuel Control #define EVT_CONTROL_STAND_ENG1_START_LEVER (THIRD_PARTY_EVENT_ID_MIN + 520) #define EVT_CONTROL_STAND_ENG2_START_LEVER (THIRD_PARTY_EVENT_ID_MIN + 521) THIRD_PARTY_EVENT_ID_MIN is simply 69632. So, in your case, the numbers would be 70152 for Engine 1; and 70153 for Engine 2. Those are the events you need to trigger. 6 hours ago, Noel said: I've not found a way to save a configuration where after 777 launches to a gate or ramp the parking brake will be on, then turns itself off. That is despite my saving a default configuration with the parking brake on. Is the parking brake on and doesn't turn itself off for you? Hi Noel, the default setting I have doesn't give me parking brakes but chocks on. Does it happen to you too? Best regards,Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9! Lossless Scaling for all my sims. What a godsend...Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there .VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
April 13Apr 13 5 hours ago, yvesamuel said: How can I use these controls in FS 2024? You'll need a utility like FSUIPC or Axes-and-Ohs (AAO) to bind the event to a button or key or trigger it in a script...or I suppose you could always write yourself some custom C code... Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
Create an account or sign in to comment