Just now, flyblueskies said:

Yes I do. Basically, follow the directions I gave (delete the last two lines) and they should work. I didn't convert all of the commands...I mainly use communication frequencies, heading, and altitude.

Cool, i definitely will try this instead of using multiple softwares , thanks a lot for your inputs and help mate

I’m a real-world Airbus pilot, and over the last few years, I’ve gradually developed automation routines that perfectly replicate the multi-crew actions we perform in the cockpit during daily operations.

It’s fascinating to consider that the Airbus was engineered from the ground up to be flown by a two-person crew; yet, as flight sim enthusiasts, we often try to handle it alone—a practice that is highly unrealistic and, frankly, even dangerous.

I host almost daily livestreams on my YouTube channel, FSPRIMO, demonstrating these multi-crew operations, including all the actions and triggers I’ve programmed using VoiceAttack.

I can now even automate tasks within the FMS—actions typically delegated to the Pilot Monitoring during flight—all by utilizing LVARS and FSUIPC.

I can’t imagine my simulation setup without this tool anymore.

The best part is that I can apply this setup to both the Toliss A320 (X-Plane) and the Fenix A320 (MSFS 2024).

https://youtu.be/KPiw5Qu_E5M?si=dTOKPF9W57IVtRq-

2 hours ago, TadeuPrimo said:

I’m a real-world Airbus pilot, and over the last few years, I’ve gradually developed automation routines that perfectly replicate the multi-crew actions we perform in the cockpit during daily operations.

It’s fascinating to consider that the Airbus was engineered from the ground up to be flown by a two-person crew; yet, as flight sim enthusiasts, we often try to handle it alone—a practice that is highly unrealistic and, frankly, even dangerous.

I host almost daily livestreams on my YouTube channel, FSPRIMO, demonstrating these multi-crew operations, including all the actions and triggers I’ve programmed using VoiceAttack.

I can now even automate tasks within the FMS—actions typically delegated to the Pilot Monitoring during flight—all by utilizing LVARS and FSUIPC.

I can’t imagine my simulation setup without this tool anymore.

The best part is that I can apply this setup to both the Toliss A320 (X-Plane) and the Fenix A320 (MSFS 2024).

https://youtu.be/KPiw5Qu_E5M?si=dTOKPF9W57IVtRq-

Wow that’s awesome, are you using the msfs agent plugin for that ?

@Parme Just wanted to check and see if you were able to use MSAgent in Voice Attack?

Edited August 7Aug 7 by flyblueskies

On 8/7/2026 at 6:59 PM, flyblueskies said:

@Parme Just wanted to check and see if you were able to use MSAgent in Voice Attack?

hi, im gonna try now, i have been working, but ill update you on how it goes :D

On 8/7/2026 at 6:59 PM, flyblueskies said:

@Parme Just wanted to check and see if you were able to use MSAgent in Voice Attack?

i dont get it to work, it says it recognizes it but follows with (starts with set heading to) but nothing happens in cockpit,....

2 hours ago, Parme said:

i dont get it to work, it says it recognizes it but follows with (starts with set heading to) but nothing happens in cockpit,....

I'll see if I can add some more screenshots. After importing the MSFS Agent VAP file, I modified them so that I simply say 'Heading' * (Heading 125, for example). I find this works with most planes, but I would try it first with a simple Asobo plane, such as the 172.

Edited Monday at 12:16 AM4 days by flyblueskies

Here are my heading settings:

The first line in the Execution Box:

Double click on the second line as shown above to display the window below:

The second line in the execution box:

Double click on the second line as shown above to display the window below:

The last line in the execution box:

Double click on the second line as shown above to display the window below:

9 hours ago, flyblueskies said:

Here are my heading settings:

The first line in the Execution Box:

Double click on the second line as shown above to display the window below:

The second line in the execution box:

Double click on the second line as shown above to display the window below:

The last line in the execution box:

Double click on the second line as shown above to display the window below:

Well everything is set and the plugin recognizes the command but nothing changes in the sim, so I wonder if there is a connection problem , I’ll need to check the debugwindow

9 hours ago, flyblueskies said:

Here are my heading settings:

The first line in the Execution Box:

Double click on the second line as shown above to display the window below:

The second line in the execution box:

Double click on the second line as shown above to display the window below:

The last line in the execution box:

Double click on the second line as shown above to display the window below:

Got it to work with heading and altitude now ! Thanks alot! But , a question, if I want to add simconnect evens that’s not supported by the plugin do you know if that is possible, for example ENGINE_AUTO_SHUTDOWN?

1 hour ago, Parme said:

Got it to work with heading and altitude now ! Thanks alot! But , a question, if I want to add simconnect evens that’s not supported by the plugin do you know if that is possible, for example ENGINE_AUTO_SHUTDOWN?

I'm glad you got it working! Unfortunately, I have not tried adding other simconnect events like this. So, I don't have any suggestions. If you do find a way, please post here. I would be interested in that as well.

2 hours ago, flyblueskies said:

I'm glad you got it working! Unfortunately, I have not tried adding other simconnect events like this. So, I don't have any suggestions. If you do find a way, please post here. I would be interested in that as well.

Yeah so basically it’s open source someone out there has probably done it, I’ll do some research

On 8/10/2026 at 12:44 PM, flyblueskies said:

I'm glad you got it working! Unfortunately, I have not tried adding other simconnect events like this. So, I don't have any suggestions. If you do find a way, please post here. I would be interested in that as well.

i have one question tho, AP_ALT_VAR_SET_ENGLISH doesnt seem to work on the GS1000, it just increments the altitude by 1000, have you got that working?

3 hours ago, Parme said:

i have one question tho, AP_ALT_VAR_SET_ENGLISH doesnt seem to work on the GS1000, it just increments the altitude by 1000, have you got that working?

I'd have to give that a try. Most of my recent flying has been done with the Black Square Baron. Which plane are you using, and I'll give that a try (assuming I have it).

Just now, flyblueskies said:

I'd have to give that a try. Most of my recent flying has been done with the Black Square Baron. Which plane are you using, and I'll give that a try (assuming I have it).

cessna 172 G1000

thanks