oal331

Today, i noticed something that may has relation with the above problems. I was line-up and after 40% N1 i push TOGAThe Master Caution tunred on and i rejected. I saw DOORS at F/O six packs and at Overhead that FWD Left & Right Overwinds Doors was on.I saw in external, nothing was on, all doors closed.I also saw at FMC that i didn't have any Failures Automatic on, all Failures are off. Just in case, i pushed to reset all failures and also the serviceI start my flight form PMDG's Original Cold & Dark panel state. After i didn't notice any problems, i continued take off and my flight without any other problems regards Eddie

I also had the same problem yesterday. I made i flight from LGKR to LGAV at FL390 (was the Optimum Level)I load FSX and PMDG's 737-800 with it's default situation as coming preset, with all on, engines running etc, ready to fly.I don't have any failures active.I also have the AES. I tryed the Alternate system, without success. Only the manual was working.After land, i was trying to reset all failures with no success, after reset, in next seconds it was active again. Regards Eddie

I also had a FSX crash, during takeoff, when by mistake pressed "X" in my keyboard.......Eddie

Hi,today i noticed this thread and i have to say that is unfair not having some important Greek Airports in your products. As you have the option to "read data" from Vatsim, i can't see why not include these metars to your weather s/w. Other freeware s/w, (of course simple enought, not comparared with yours as i know) they support some of these airports, giving the correct current metar.As you know Greece has almost mild clima, so almost all the airports they don't have some difficult situations, exept LGIO (IOANNINA). LGIO is established in a mountain, close to a lake and many winter days they have snow, low visibility, low clouds, fog etc, so it's the perfect destination, as it does not have ILS, just an ARC VOR approach.Please, make a second thought and give us the metars missing, at least reading the weather from Vatsim's data.ThanksEddie

Helloi'm interesting about it.But i have some questions, before... 1)Why are you selling it?2)Is it compatible 100% with Cpflight's radios and panels? Is it 100% scale of the original sizes?3)As i can see, your's does not have the dzus rails like the one in Aerodeck's site, but other rail system. This one, as i can see in photos has some empty areas, without rails, why is this?4) Can you give me the total cost with shipping to Greece?Please can pm me at my email address (oal331 [at] gmail [dot] com)Best regardsEddie Armaos

Very very nice setup!!!You have everything you want to fly close to you in an ergonomical home cockpit.Very nice job, very nice prototype idea for all in one cockpit!!Enjoy it!!Eddie ArmaosAthens-Greece

I don't know about outside view, but for the PFD/ND instrumkents a 19" wide monitor is the best solution to give you the right size for these displays (at least in my 737NG cockpit). For the Eicas i have a 15" normal TFT monitor.If you are talking about 737 visit Engravity's site and check forums about MIP and best monitors.RegardsEddie ArmaosAthens - Greece

If you don't speak and read german language, do not select Fsbus, because there is no support in English speaking forums :-(Fsbus is only one person, working for his cockpit and offering his works to Fs community, but there is no support and many problems are remaining as is for a long period. His software is very friendly and easy to use.In other hand Opencockpit's s/w is more complicated but with more capabilities, a perfect support and you have all the options you want for the electronics: to make them, to buy the pcb's only, to buy all the parts needed or to buy them finished and tested.As George said, make a search in this forum and make your choice.Eddie ArmaosAthens-Greece

Yes there is haigh voltage.When i open my first PSONE tft monitor for FMC i saw a warning label about high voltage!Take care!!Eddie

I made these from aluminium in a local workshop and the quality is perfect. I have many of these and it's easy to order more in case i will need more in the future.regardsEddie Armaosoal331 (@) gmail.comAthens-Greece

I want to share with you, my last good news, about aircraft fasteners replica.I'm a new owner of Engravity's Overhead and it is really an excellent product, i recommend to every 737 cockpit builder.I was looking for the aircraft fasteners replica, but the ones Engravity is selling are out of my budget, for a complete 737NG cockpit, as i need many of them also for AFT overhead, pedestal etc.So i made many of these fasteners, and the result is perfect!! The fasteners are designed for a standard M4 screw and i only have to paint them in Boeing's grey color RAL7011.http://forums.avsim.net/user_files/158078.jpgEddie Armaos

Thank you Rob,you was very helpful !!Best regardsEddie ArmaosAthens-Greece

Hello Rob,i saw your work and it's amazing!I admire people can make mechanical constructions.Before 2 years I made sone some of this panels for MCP, EFIS and RADIOS with a laser cut and engrave, but it was more expensive and a had some problems with the paint quality.So, your approach is better because you do the job by yourself and with an one-off investmenet for the dzus, but how you are thinking to do the lettering? By engrave the plexies som-how, or with sticker letters? And how about backlight?Finally your paint is very smooth in the plexi's surface, what kind of paint are you using and how you paint the plexi?best regardsEddie ArmaosAthens-Greece

Hi,i will propose to use one TFT monitor 19" wide instead of 2 small 9".This approach is very-very economic as you need one TFT about 200euros and only one VGA out.See here a post i made in engravity's forum about:http://www.737cockpit.com/index2.php?optio...viewtopic&t=241i attached the ACER's specs to check themhttp://forums.avsim.net/user_files/157456.jpgregardsEddie

In a few days i will have also available the MCP & dual EFIS panels in the same format, as the radios panels. All the needed parts are available in almost all electronic shops.http://forums.avsim.net/user_files/152076.jpghttp://forums.avsim.net/user_files/152078.jpghttp://forums.avsim.net/user_files/152079.jpghttp://forums.avsim.net/user_files/152080.jpgBest regardsEddie ArmaosAthens-Greece