ludwigkessler

Ok, thanks Bryan.

BTW I'm using FSX. Rory

Hiya Bryan, I use several FS2Crew products, the best being for Ifly 737. However, on occaision I like to fly the default B747, and so downloaded FS2Crew for this. For quite a while I have used Friendly Panels B747 2D panel which is far better than the original default one. Simple question, is there any way I can adapt FS2Crew for use with this panel? I have tried various things but so far been unsuccessful. I have still been enjoying flying the original panel and FS2Crew but would much prefer to use the Friendly Panels panel. Hope you can help. Rory

Ok, many thanks for all your help! Have to say, I don't think I'll be using the checklist very much, FS2Crew is much much better!

Ok, thanks Bryan. Just a thought though, as I've tried this too, I know little about gau files, but I have all updates installed up to version 2.4 but I have put the gau file from version 1.6 back in and it works, but does doing this basically make the updates useless?

Thanks for the input Klamal. I do not have FSINN installed. Just been doing some experimenting. Uninstalled FS2Crew then reinstalled my original version, which was 1.6, the BEX error doesn't happen in this version, and I can use the checklist manager. The problem starts with update version 2.2,and is still happening in update versions 2.3 and 2.4. Not sure if I should have installed an earlier update than 2.2 but 2.2 was the next available one I saw to install. Rory

Actually, I have been having this same error before I even bought the checklist manager. It wasn't a problem before, as I said, because it normally does it when closing FSX, or when changing aircraft, and usually I don't change aircraft. I'm unsure if it modifies the panel cfg file and will try to find out. The checklist manager program is loaded via the learning centre, and it just opens the 737-800 with the normal panel first but as to why, I don't know but it does tell you that when starting the program and says to load the aircraft of your choice once the program has loaded up. I am not loading any saved situations either. If its unfixable then I'll just stick with FS2Crew as I really like it! I will try uninstalling then reinstalling the FS2Crew version I originally bought and see what happens, I can't remember if this problem started after upgrading to version 2.2 or not. Thanks. Rory

Hiya Bryan, Sorry, I have the latest version, 2.3 and before that updated to 2.2. Think my original version is 2.1, purchased it around christmas time or just after. Rory

Hiya all, I have been getting this error for a while - not usually a problem because it normally happens when I attempt to shut down FSX, but it also occurs when I change the aircraft, ie from the iFly 737 to another aircraft type. However, I have recently purchased SEA's Checklist Manager for the iFly, and the way of loading this means I have to select the ifly of my choice - the 737-800 widescreen version - after already loading the iFly 737-800 normal screen version which the checklist opens by default. When I select the widescreen version, I then get the error which causes FSX to crash. The error is as follows:- Description Faulting Application Path: E:\Program Files\fsx.exe Problem Signature Problem Event Name BEX Application Name fsx.exe Application version 10.0.61637.0 Application Timestamp 46fadb14 Fault Module Name FS2CrewIFly737.GAU_unloaded Fault Module Version 0.0.0.0 Fault Module Timestamp 52ddee79 Exception Offset 60f3e1f0 Exception Code c0000005 Exception Date 00000008 OS Version 6.1.7601.2.1.0.768.3 Locale ID 2057 Extra information about the problem LCID 2057 So, at the moment I am unable to use the checklist program. Is there anything I can try that will fix this? The reason I bought the checklist is for those times when I wish to do the whole startup and button switching myself instead of the FO doing it all the time in FS2Crew. Thanks Rory

Ok, no worries, thanks for the reply Bryan.

Hi all, Although I use FS2Crew with the Wilco A320, I have only recently started using it with the iFly 737-800. These are only minor things really but was wondering if its just how it is or if I'm not pressing something. 3 things, all to do with announcements. 1, " Lets start setting up " gets no reply, and the same for " Out for the walkaround " and " Back from the walkaround" non of these gets a reply. Only minor I know but would have thought at least the back from walkaround would have got a response. I am on version 2.2 and have just installed but not yet run, version 2.3. Any thoughts? Cheers, Rory

Ok ron, thanks. I've downloaded the audio editor. I've made a start on editing and it sounds ok. There's still quite a few folders to alter though.Rory

I thought it would be a lot simpler to do :( I dont have an audio editor unfortunately or I would go for the easy option of editing the wavs. thanks anyway!Rory

Hiya guys,I did try a search on this forum - altering call signs, and changing call signs, but it came up with nothing! I'd like to change one of the call signs in RCv4, from Emerald harbor Air to just Emerald Air, which is the VA I've started flying for. Please can someone tell me which files to edit?Many thanksRory Hamer

Oh, ok. Many thanks for the reply Bryan.Rory

Hi,I have recently now bought the Airbus special edition and evolution upgrade (reluctantly, as only bought the airbus A320 fs2crew version last oct!). However, I read on here a post about increasing the cab volume slider in the FS2Crew main?? I am unable to find this "main". I only seem to have the FS2Crew start centre and cant find anything on that. I've looked in the FS2Crew folder in FSX and gone through it all and cant find it. So, please can you tell me where it should be?Many thanks,Rory

I dont really like jumping into another persons topic, but I bought the evo series 1 for FSX about 4 days ago and have issues which I want to share and see if either anyone else has similar or if there's any fix. I was more than happy with the original Airbus vol 1 and am about to go back to it. With the Evo, at least for me there are several issues. first the weather radar doesnt seem to work, I turn in on and it does a sort of scan for about 3 secs then winks off and thats it, nothing else, I can no longer hear the APU powering up, the seatbelt and no smoking signs dont make a ding sound anymore when being turned on, finally, more troubling is that there is no "minimums" annunciated, nor any altitude callouts on approach to the threshold, ie, 50...40...30 etc, and finally there is no "retard, retard" annunciated. I have done four flights and these issues are present in all of them. Any thoughts on this? Sorry, just realised this is a post for FS9 and not FSX, so please feel free to move it!Rory

Wonderful! Ok Bryan, thanks. I may just go back to the original Airbus vol 1 then. To be honest,despite perhaps all the hype about the Evolution, I've noticed little difference in it and the original one.Rory

Hiya,I have FS2crew A320 edition for FSX and not the FS2crew airbus special edition. Do I need an upgrade to use my version with the Wilco Airbus Evolution Vol 1 which I have just bought? I've looked for one for my version but can only see an upgrade for the special edition.Many thanksRory

Guys,In RC5, will we be able to select an IAP Approach when initially setting up RC, ie, when selecting the flight plan? The reason I ask is, at the moment when wanting to select IAP this can only be done after contacting Approach who tell you which runway is in use but by the time you manage to select IAP Approach, the controller is usually badgering you to either turn to his assigned heading or to descend to his new altitude. It would be easier to be able to select it at the beginning for those of us who know we want to fly a full instrument approach.Regards,Rory

Sorry, it was the makerwys.exe 4.51 that fixed it. I then updated fsuipc from 4.70 to the latest as a matter of course.Rory

Hiya Ronzie,Your advice has fixed the issue, so many thanks. I dont understand though, why the problem occurred in the first place, as I've not added any new scenery or airports for a long time. Once again, thankyou, your step by step advice was excellent.Rory

More info - have also checked FS's R5 file and EGLC doesnt appear there either.rory

Hiya chaps,I tried to do a flight from EGCC to EGLC earler, but RC doesnt recognise this airport. I've rebuilt the database but still no show. I've checked the modification date in the a4 and c4 within the Data folder and it shows that the rebuild was done. On checking the R4 file in the Data folder, I cannot find EGLC listed there. I'm using FSX with all updates, also Aerosofts VFR London scenery which adds scenery for London City EGLC also.Please can someone tell me how I can add the required info? I dont fly often into City Airport, but I'm sure the last time I did so, there wasn't a problem.Thanks,Rory

Understood. thanks for your help.Rory