Nice

That worked! Thank You! :lol:

Hello, Afte some tiem i am trying to refine my MD11 knowladge and skills. So reading FMC manual i found out about those CLB THRUST and ACCEL altitudes. After some time I tried one flight and I tried to alter those values mentioned above but what ever I input I get error OUT OF RANGE or soemthing like that....so I am confused as I follow the manual and I am not typing in altitued that are said in manual that are minimums that is 1000ft above ground...so I am confused since nowhere I cant found what is caousing this error and confused since i did not violate minimums prescribed in manual. SO what I missed? BTW could somebody indicate me to some good sorces on how to deal with those noise abatament procedures and finding those data on charts and properly interpreting that data. Thank YOU! Daniel

As far as I know USB2 has 4 conection points inside of the port. 2PowerSuppy +5V,-5V and 2 Data transfer contacts. For the USB3 I am not sure if there was any change in suply power but I know that USB3 has slightly diferent port construction then USB2. It has kind of 2modes One for USB3 compatible devices and second one for USB2 devices.. Moust of devices are still moustly USB2 standard so if it has conector USB2 when you plug that kind of device in USB3 port it will work becosue it will conect in USB2 mode becouse as I said before the USB3 is diferent inside that means that USB2 device will slide in postition for USB2 devices and so will only have contact with wires that you can find in USB2 port that meaning it shouldnt provide more power becosue it also could destroy device itself..If you are about to conect USB3 device (USB3 standard suported usally some external SSD and external storage devices) will, due its conector design, achive USB3 conection....that as how I am informed about USB...

Hey I had same problem when i was tryig to replace the fsx.cfg file with this one tweeked using this tool http://www.venetubo.com/fsx.html.....the problem is when you downlaod this modified cfg the OS know that is not from your PC not created on your pc and so it blocks it and it won run it. You can see that when you right click on it and look at that window under securityv tab(I thin so) on the bottom there is some tick box about that you allow to run this even if it is not from your PC...or something like this...go ahead and check your cfg if it has soemthing like this in its propreties window...if it does have or doesnt try following...this two steps fixed problem in my case....1) go to C:\Users\your user name\AppData\Roaming\Microsoft look there for FSX folder right click propreties/security tab/edit/ and thick Full Control box For all User names or grups that you see on that list now apply those changes this step do also for your root FSX instalation folder....2)now navigate to your FSX.cfg file open it in notepad select all/copy then close it and delete the cfg file the in the same folder create same file with same file type and same name and paste in it the lines that you hava copied before..and save changes...now it should work in my case it worked..

Oh well after many email between me and Saitek support asking them if they have any solutions and even sending them one email telling them about our frustration about switching responsibilities...telling us to complain to microsoft when we complain to microsoft they send us back to joystick maker and so on...so wrote them email expalinig everything even shoved them this thread(gave them link) so they can see how many people have this problem and also asked them if they know about this problem they jsut answered this: "For the moment we do not know when the new drivers will be relesead. But once having this information, we will post it on our web site." Thank you for your understanding. So we gona wait and hope for the best....

rara_bb thank you! Problem Fixed...FSUIPC calibration I have put there direct mode

Could anybody help me setting up FSUIPC...i Have menaged to assign via FSUPIC all the axis like elevators ailerons ruder but I am having problems with throtle lever..I am using Saitek Wirelles Cyborg evo and it has this big throtle lever on the base of the joystick..so when i got to FSUIPC assignments and move the throtle axis when i move it tu full forward it reads value up to 16384 i hink so whne i return it to normal postiion all the way back( starting point) it reads -16384....now could somebody guide me how to set this throtle axis? Thank you!

I think tht pirates and legitimate users deserve help caouse do you think that in all this crisis all people can aford spending money in virtual 767???do you think that parents of some kid would be able to buy him in such times virtual 767??I dont think so.This is a game so not all people want to waste their money to virtual 767 if is there cracked one.

Nicely said!

I know but before when for e.g in load menager i put 75000lbs of fuel and click save and load plane and check fuel i see 75000lbs FOB.thnx on your answer No offence but I hate selfih people!you are then only one devoloper so far that i know for fs that takes extra registration for support.Now what if people how fisrt download cracked to test it how works etc.caouse he wont spend money on thng that is not good and then recive hell of bugs and 0 support.and when they test plane and IF THEY come on problem and search help they recive directions how to spend money first.I know..now this crisis make things even worse people want buy software so they crack them and devoloper are loosing money and are searching the way how to take out money from people.Put things on internet makes them public and everybody can see tehm and get them soner or later somebody will crak them.Look at PMDG they are not that so selfish with answers.I dont know why you have problems with kind-hearted person.No ofence DShutt!!!!I am just trying to tell you that you cant win against pirates and to stop being selfish.Somebody might buy your product if you be more kind person and show them taht you have great support and you enjoy making pople happy when they use your product.Without taking money on hard way!!

i have lvel d 767 and after some months of nice flights witg 767 i started to have some strange problems.when i want to configure it via level d 767 confi manager e.g short haul 75000 lbs of fuel i save settings.close the config start my fs9(running on xp sp3 32 bit)load aircraft press fly now and when it loads and when i check on overhead for fuel qty i see that is fully loaded.press ALT buton go to aircraft fuel and payload and I see that all tanks are 100% FULL insted configured as in config manager for short haul.i reinstaled plane many times thinking ok somethong got corupt i will reinstal it but that doestn work sitil it load full.also when i select it from menu in aircraft desreption on the right side of it it also writes configured for short haul flight but it is not.no changes with fuel.any ideas what went wrong??

Should i take i5 or intel core2quad Q8400 moustly i pla to use fsx with Win7 home premium.also how fsx will perform with this procesors??

Make pls A380 i am so mad about that aircraft i wish that one day somebody will mako some good a380 simulation.I mean how made high quality a380 WILCO tryed but bugs etc.So i think PMDG can make it best!!

I have solved the problem!!!Solution:All sound in FSX put to 0 and control the volume of FSX i mixer that comes with Win7 there you can control the volume of every program or game.To get to mixer click to small speaker icon i right botom corner and then click mixer and you will fin volume for FSX there you control itNOTE: To adjust volume you have to run fsx !!!!!!!!That is how worked for me!!

Hello,I have instaled FSX Deluxe on my Acer ASPIRE 7520 under Win7 ultimate 64 bit.LEt say no problems with FPS but problems with sound.When you switch from cockpit to spot or some another camera from outside the sound change ti sound of engines how they sound from outside of plane.But when you return to cockpit you should hera them diffrent i mean how they sound from inside.But win7 doesnt make that difrence caouse when you return to cockit win7 plays double sound in same time one from inside and another one from outside.Now you can imagine how much noise i have inside cabin which is bad when you fly on VATSIm or IVAO caouse you cant hear ATC!!But i have noticed when you shout down all engines and restart them in air the sound comes back but if change agin camera the problem returns.This problems ocurs on addons and defoult one.I have also something noticed.When i have uninstaled FSX and instled agin withaut instaling SP1 and SP2 the sound is normal you can switch camera how muchyou want but if you instal SP1 the problem emerges!!!!So please help me guys to resolve this one!!!Again my config:ACER ASPIRE 7520Windows 7 Ultimate(64-bit)Microsoft Flight Simulator X Deluxe

I have serched but found nothing so please keep posting replys thank you all!!!

I would like to know about any tips how to improve fps in fs9.so tell me guys evrything you know about it!

I will try it and tell you results

Hi to all,Recently I have downloaded you Nice PMDG MD-11 product and i was so happy until i told me that i have to instal update for Fs9.Ok no problem i go to Microsoft site find fs91update(contains 160 new model bridges and how can somebody please tell me where is conection betwen MD-11 and 160 new bridges??)anyway i instaled somehow update after some problem with type error 34 but solved and instaled correctly.I start my Fs9 and he crates some new database and i created flight with cesna flight loaded and that i exit from Fs and restarted comuter runed again setup and again i told me that i must update Fs9.Acording to him i have somehow still FS 9.0 and he doesnt want to install cause of that and i did the update!!Where is problem???So what has gone wrong?!!!!Or I need some agian stupid update!??

Oh i am bored of that sentence:"first you need to learn how to crowl then how to run"you canot use that sentence in fs because when i stasted playing fs 2 years ago first flight was LFPG-KJFK with 747 and it was sucesful because you must know your plane good as your girlfrend it is beter to learn a matery by understending it not tn learn like a song because if you dont sing that song every day you will forgot the words and that can hapen to you if you so learn Fmc to be honest i newer read the manuals i more like more to learn with experiments and practical and that how i learned how to fly pmdg 747 and how to program fmc.i thing that you must reset mcp alt and you must enter the alt at that you want to be at that point also make sure that if des is big you must be at greater distance from another point.

Yes I see yellow dot on PF as for main i will try it again and i will let you know

It is nothing interfiring with fs2c and i dont use yojstick for comand i use keybord also i have noticed now when FO says that he is ready for PF i then pres PF and then in mannual i tays that i need to press main buton to go trought it but when i press main buton nothing hapens and i eait for 1 min than ipress againn and in manal it says that capt should then confirm something and that cpt an fo are going to make some read outs but nothing i dont hear nothing and after waiting some time then gnd engenier will call and ask for the fuel and i have not stil finished my PF and yellow dot is turned on PF??what is going wrong???

-MCP want to gisplay-when to pres butonf PF and when it is presed should i then more pres it or what-FO didnt set RTO and seatbelts sign-FO didnt make engine sturt up corectly he try it to start all 4 engines in one time!!-hey dont close all dors like cargo etc.. when gnd enginer say that is redy for presuration and that all doors are closed in fact they are not all closed!!In one word it is hapening strange things.Also i am runing Fs9 without full screan you knw just in a window because i am in same time reading manual and i am going step by step.

I have tryed to fly with this fs2crew i have runuing fs9 in window and in the left side i have opened manual for fs2c and i am duing everthing step by step but i dont get it some things!!Like when to press PF on main of fs2c and whaen i presed whot should hepen should i use main buton for pf also the FO didnt set brakest to rto and seatbelts to auto the MCP doesnt wont to open when i pres main buton when i am starting engines it starts all at once.What i am doing wrong???I know tht maybe to help me requireslot of typing

can you apply just brakes?are normal brakes work