andy a

Thank you all very much for your replies. As a few others are also experiencing the same problem intermittently, probably some bug lurking around. The external view shows no signs of overheating, chocks are away, and the push back function, initiated via the EFB is fine. I've tried tapping the toe brakes too, but to no avail. All wheels are turning, but the Bus isn't moving. It's like when you have a car driver trying to get traction on a snowbound road, high revs, but no traction. I'll just ask the Pax to get off and give the think a push to get it rolling!😉 Again, my thanks to all Regards Andy

Hi folks I bought the Fenix A320 MS2020 a couple of weeks ago, and I'm happy with it, apart from a taxi problem on 2 occasions. The push back, and taxi from the gate to the runway hold position goes without any issue. The aircraft is stopped, with parking brake on. I get "line up" from atc, I release the parking brake, advance throttles appropriately, but, in spite of the nose wheel and main gear wheels all turning, the aircraft does not move. This has only happened twice, out of 10 flights...and ground conditions are dry. The toe brakes are only used minimally. I can't think of any reason why wheels are not "gripping". Has anyone experienced this problem? Regards Andy

Thank you very much indeed for your prompt assistance. Kind regards Andy

Because of a couple of problems over the past week, I want to uninstall/ reinstall MS2020. Can someone please tell me how to redownload MS2020 from Microsoft Store? I have located MS2020 in my "Order History" but I can't see anything to click on to begin the Download process. I'm afraid I find MS Store a bit difficult to negotiate, and I would appreciate some advice.

No I dont have stream deck. I can change NAV freq with mouse.

Hi Icantfly, Thank you so very much for your reply. Success!! I followed your instructions and changed ILS frequency ok. Your English is not pathetic.I have so much admiration for those whose native language is not English, but who can communicate perfectly well 😊 Best Wishes Andy

I am 81, and I don't know if this is such a "stupid" post that it does not warrant a reply. If that is the case I apologise. However, I would really like to fly this aircraft, and I would greatly appreciate any assistance. Regards Andy

I haven't really used MS2020 much since I purchased it at launch. I have started flying it now, but I have a problem with the C172 GNS530 & GNS430 in the analogue version.When I try to dial in the ILS frequency by pressing the "Push C/N" button, the digits only change in the COM section. Can someone advise if this is a bug? I don't think I'm doing anything wrong, as I've used the GNS430 in other sims. Regards Andy

Thank you very much indeed gore54. Your info worked just fine. Thank Goodness for helpful people like you. Kind regards Andy

Although I know nothing about electronic circuitry, my field of expertise stopped at the mains power point , I kind of figured that would be the case. Andy

That's interesting Al. I had tried a few hours ago to use a PS2 to USB adaptor to connect the Saitek Quad, but to no avail. Regards Andy

Nothing wrong with the Logitech G Saitek Quadrant..I was the problem! I had made mapping errors, but now all ok. Thanks Regards Andy

Thank you for your reply devgrp It's really the Flaps, Throttle and Spoilers I want to use with the levers. I'll try to get a PS2 to USB adaptor. Regards Andy

Thank you for your reply. I bought the ProFlight Yoke system a few years ago. I'll try the adaptor you mention. Regards Andy

I have a Logitech G Saitek ProFlight Yoke System with Throttle Quadrant, which works ok in P3D and X-Plane 11. The Throttle Quadrant does not show in MS2020 Control Options however. It is connected to the Yoke by a PS/2 plug, and I wonder if the problem could be overcome by buying the separate Logitech G Throttle Quadrant which is powered by a usb connection. I dont want to spend £50 on another Throttle Quadrant if the issue may not be resolved. Can anyone advise please?

Happy New Year from Scotland!

Some folks on the Forum seem to have very good flights with no problems, while others, like you and I, have difficulties. The scenery in the sim is splendid, but I have reverted back to P3Dv5 as a temporary measure, in order to enjoy some flying using my Logitech controls. I hope you get things sorted out.

Like you, I have Logitech (Saitek) Yoke, Throttle Quadrant and Rudder Pedals. In the MS Controls section, Pics appear of Yoke and Rudder Pedals, but not of the Quadrant. However,for me, Throttle Control and Rudder Pedals work ok, but not the flaps. I think I read somewhere on the Forum that Logitech have to play a little catch-up for compatibility in MS2020. I'm assuming that your Quadrant plugs into the port on the Yoke, same as mine, and you Pedals into a usb port on your pc. Sorry I can't offer any more.

I agree with bobcat999. I was really thinking there must be something I was doing wrong, when I read on the forum of all the folks having great flights. I stepped back from MS2020 and went back to P3Dv5( not perfect I know), for a few weeks, simply to enjoy complete flights. Yesterday I installed the latest update from MS2020 and I was amazed at the scenery over Manhattan, then the AP switched itself off and the aircraft went into a dive. Although I've been simming since FS2000, I'm not a techie and I rely on tips and hints from members, and of course from You tube tutorials( a big thanks to them). However I do feel a bit cheated by the overall function of what was sold as a Flight Simulator...the "Microsoft" badge was a big incentive for me to buy it.

Yes it is challenging, but like you, I enjoy it too. A pleasant change for me from the big passenger jets. Love the sound of the turboprop, particularly in reverse thrust.

Ok, thank you for the info. Although I purchased the Majestic Dash 8 Q400 for P3Dv4 2 years ago, I only changed over to the v5 for Dash8 a couple of days ago. I have just enjoyed a flight and everything was A-Ok. a great aircraft! 😊

Thank you, I'm pleased it's sorted too. Just a thought , in 2000 I was allowed entry into the U.S and Canada much quicker than I entered the Majestic website😀

Good Morning, Yes "JFL" letters were included in the copy/paste. After numerous attempts I left it for a while, then went back, and at the 3rd attempt...success!! Downloaded/installed and issue resolved. Again, thank you for your replies. Kind regards Andy

Thank you for your reply. I had actually visited that site prior to posting here. Unfortunately it does not recognise my Order No from Just Flight..could be I need some Devine Intervention😉

I feel a bit silly posting this message, but I am unable to find Majestic software website. I contacted their support as I was having an issue with the Majestic Dash 8 Q400 P3Dv5 They have told me to Download/Install version 1.021 rev.2 dll fix from Support->User Area on their website. The problem is when I google Majestic Software I am onto a Kingdom Hall website. Can someone please direct me to the correct site Thank you