lewismorrison22

Ok i'll give it a try

Hi, I currently have a Saitek x52pro, and P3D v3.2. My problem: My rudder and pitch axis work flawlessly. However when I try to roll, for the first 80% of joystick movement the yoke moves a minuscule amount, and for the remaining 20%, the yoke leaps to full left and right. I have this problem on ALL carenado and Alabeo products and I have found no solution yet, it is quite frustrating. I think the problem only started when I got my X52, this does not make sense as all other aircraft work fine with it (PMDG, A2A, aerosoft.) I have tried re calibrating it is P3D, but this does nothing. I have null zones and sensitivity set to min, and max, respectively. Any help is appreciated, Lewis.

Hi, I currently have a Saitek x52pro, and P3D v3.2. My problem: My rudder and pitch axis work flawlessly. However when I try to roll, for the first 80% of joystick movement the yoke moves a minuscule amount, and for the remaining 20%, the yoke leaps to full left and right. I have this problem on ALL carenado and Alabeo products and I have found no solution yet, it is quite frustrating. I think the problem only started when I got my X52, this does not make sense as all other aircraft work fine with it (PMDG, A2A, aerosoft.) I have tried re calibrating it is P3D, but this does nothing. I have null zones and sensitivity set to min, and max, respectively. Any help is appreciated, Lewis.

I have installed 20+ other add-ons that are not compatible with P3D with the migration tool, all have worked flawlessly. Thanks for your helpful advice though. :wink:

OK so I installed Wilco Airbus Vol 2 with the FSX migration tool, then installed the A380 mega-merge, this works perfectly in fsx, but the clickspots in P3d do not work? Any Ideas? Im lost If you're interested, here is the merge: https://www.dropbox.com/s/pja55rjrachs0c2/A380%20Super%20Pack%20FSX%20V1.zip?dl=0

Thanks for all the responses guys, It was because I put 0 in step climb

Never heard of anything like this... might be time for a reformat ^_^

Ok, I've tried to figure this out but I can't so I'm hoping someone on here will be able to help... So, when I'm programming the FMC for a long flight and there are planned step climbs, I go to the way point in which I must climb and put in the new altitude followed by an 'S' for example, I may put '/370S' and this works as it should, i.e. it will change all the following way point to 37000FT. The problem I face is with the auto step climb feature. It simply does not work when I turn the feature on. So here is a quick example. Im flying LAX - DXB. My initial altitude is 370, with a step to 390 - I programme the FMC appropriately and will have 370 set in the MCP. However, when I reach the SC point, nothing happens. The MCP does not change and the aircraft does not climb. I've also tried putting 390 in the FMC before the SC point, but the aircraft still does not climb automatically. I am at a loss. Any help is greatly appreciated. Lewis

I'm with you on this. Perhaps because the aircraft was so old, there was a problem with the pressurisation, resulting in a slow decompression, subsequently the crew realises that they are being starved of oxygen and so process to descend, unfortunately it may have been too late resulting in the flight crew passing out. Just peculiar ion though as with Helios the 737 kept flying until it ran out of fuel... The A320 had plenty of fuel when it went down.

According to google, and to FEDEX virtual, the max paload of the MD11F is around 200,000lbs, however I can only go as high as 170,000lbs in the load manager. Screenshot: http://gyazo.com/3a2...16ea669ef43b9c4 Regards. Lewis

According to google, and to FEDEX virtual, the max paload of the MD11F is around 200,000lbs, however I can only go as high as 170,000lbs in the load manager. Screenshot: http://gyazo.com/3a2d73ab7745c278d16ea669ef43b9c4 Regards. Lewis

Problem solved thanks so much

So i got fs2crew for the NGX and followed all of the steps regarding speech recognition, and for the most part it works correctly, however, there is a problem in which my voice commands will do things outside of flightsim, for example, if i say start engine 2, the start menu will open. Please help. Thanks Lewis

Ohh thanks Thought it may have been due to a maintenance issue with the 380

Why re BA operating a 777-300ER to LAX? I thought they only operated 380s now?? http://gyazo.com/823c36f5164ee6b9d29bbef4a090defa

I am truly shocked at the images I am seeing online, God help those pore families... :(

LOL ITS ABOUT TO GO DOWN

How do I set the B200 to cold and dark? surely there must be an option??

The speed nor altitudes are showing up on the PMDG 777 leg page?? http://gyazo.com/fc34e5715f19677aea16f6b698283057 anybody?

Hi, I just needed your guy's help on somthing. I know how to figure out the current active runway(s) fomr the metar and everything but I'm unsure of one thing, say your arriving at EGLL, and the current runways in use are 27L/R, how do i know which one is being used for departures and which one is used for arrivals? I would like to know this for every airport please -Lewis

FTX global textures are just refusing to load and I can't take it anymore!!! Here is a video: https://www.youtube.com/watch?v=vPay0pXdvVs#t=0 Specs: i7 4770k @3.5ghz GTX 660 12Gb Ram 2TB HDD 7200 Thanks you

can someone please tell me what i'm doing wrong?

FTX central acts normal I click on the region and then apply region and it says successful however nothing appears in flight sim When I get home in about 4 hours I will. Alena quick video showing the process which I go through and tun yo guys can tell me where I am going wrong, Thanks Goethe help guys and by the way, I think my cup speed is 3,5ghz

Thanks for the reply guys, I do to think my system specs are an issue though bit if it helps, the. Here: I7 4770k Gtx 660 12gb ram Installed on a 1tb 7200 hdd As for belynz, he is a very good youtube that provides a variety of different guides An it would be great if someone could link me with a good tweak guide. Thanks. -Lewis

I have been playing flight simulator for a while now and have many different addons. My problem is this: I have FTX Global and FTX Vector but my flight sim looks nothing like the screenshots, I have done Belynz's tweak guide, i have gon into FTX Central to enable it but it never seems to work. I will attach some screenshots of my settings, what my sim looks like and what I think it should look like. Also, the distnce always looks blurry even though MAXLODRADIUS is in 6.5 in the config... Please help.. I just want it to look good. What Mine Looks like (Gatwick): http://gyazo.com/bb393d40d5e48bc625778db9844396f9 My settings: http://gyazo.com/2276aab4794c07220e2af405f541c3e7 My scenery library: http://gyazo.com/242d006e5f97425a0b0c56dfc4aec3c2 What I think it should look like... http://fsfiles.org/flightsimshotsv2/images/2013/06/11/moOTZ.jpg http://www.pcpilot.net/central/images/gallery/4745.jpg http://xsimreviews.com/wp-content/uploads/2013/05/20130510-141152.jpg http://www.petford.net/flightsim/auckland.comparison.07ftx.jpg Someone please help. Thanks