heathrowspotter

Reinstalling scenery and content has fixed the issue. There must have been a file corrupt or missing somewhere but the issue is fixed. Thank you everyone for your help and suggestions!

I am currently reinstalling P3D scenery and content, hopefully this is the fix I have been looking for.

Yes there is nothing in there because I deleted it and it has rebuilt itself therefore there is no scenery in that cfg. However the problem is still occurring therefore it must be an issue somewhere within that CFG.

So far I have only been testing at airports I have scenery for. I have disabled ORBX completely and travelled to an airport I do not have scenery for in this case Belfast City EGAC and this is how it looks http://prntscr.com/rnsn3x This is completely default P3D.

I do not have vector installed I have tried deleting my scenery.cfg, allowing it to rebuild itself, however the problem did not go away. I do not use fsaerodata or any addon mesh product that I am aware of. This is the scenery.cfg that P3D rebuilt:

Yeah I have done all of that and no luck. It seems to be an issue with global as this is happening at every airport I have across the world. However with all orbx products uninstalled the problem still occurs however it will just look slightly different however there will still be a clash.

Update: the issue is not just within Luton I have just discovered this issue is across all my airports across the world even outside of Europe there seems to be an overlap.

Hello everyone, I've come across an issue with my UK2000 Luton 2020HD. There are no markings on the runway and taxiways. The scenery was working absolutely fine until I opened FTX Central and udpated to the new orbx central and updated my orbx libraries, global and england. There are areas of the scenery where the markings are coming through slightly. This is what the scenery looks like: http://prntscr.com/rng5sq Areas where the markings are showing through: http://prntscr.com/rng6jn So far I have tried deleting the EGGW BGL'S from the ORBX\Scenery folder, moving UK2000 Luton above all orbx entries in the scenery library. I have tried reinstalling Luton completely, verifying all the orbx files in orbx central, I have resyncronised the simulator in orbx central. I have also unticked all ORBX entries in the library to see if the issue persists and it did however some of the markings re-emerged however there was still some sort of clashing occurring as shown below: http://prntscr.com/rngaik I have no previous versions of Luton installed and I have ORBX Global, FTX EU England and OpenLC Europe. I am out of ideas and was wandering if anyone has had a similar issue or if anyone could possibly shed light on a possible resolution. Thanks.

Solved. The issue was I had way too many liveries installed for the -800WL NGX therefore if anyone else encounters this issue, simple solution is to go to PMDG operations centre, highlight loads of unneeded liveries and remove them. I think TomatoShade was overloaded with liveries. Hope this helps anyone else with this issue in the future.

Hello all, Recently I decided to give TomatoShade a go after seeing various screenshots of what in can do in terms of aircraft reflections. I watched the tutorial video provided by Norshuttle on youtube and ran into a problem when it comes to the dynamic reflection maker. I would like to apply a reflector preset to the NGX -800WL but it showing up on the list on the left. PMDG 777 and 747 seems to be working fine, all liveries are showing and so on and same goes for the FSLabs A320, all liveries and variants are showing on the aircraft list on the left. But no PMDG 737 is properly showing, it shows me the 900NGX and 800NGX house liveries and nothing else. When I go to apply a preset to these it makes me choose a file instead of when clicking on 'Open a profile' a list showing like on all my other aircraft. When I choose the files for the NGX I get an error message saying "The selected profile was not saved for the currently selected aircraft model". It is giving me a headache and I can't seem to find anyone else with the same issue and I am out of ideas. Thank you

I have solved the issue now. What happened was the default power setting for nvidia cards is set to power saving so I went into nvidia control panel and changed the power setting to prefer max performance now it works like a dream

Hello everyone, yesterday I received an ASUS Dual GTX1060 6G that I had on order. This would replace my faulty MSI GTX970. I had done research and this GTX1060 is supposed to be better than my 970. I install the card and install all the up to date drivers etc... Then I restart and load up p3d, I loaded up the NGX at Gatwick with UK2000, FTX England, REX soft clouds, REX4 textures and AS16. I am only getting 4-15FPS. Previously with my 970 in this situation I would be getting 30-40fps. I turned some settings down, now I get 5-20fps but it varies massively so it would go 20 then down to 8 so it is stuttering all the time. I then turned everything all the way down I am still getting the same result. I then did a few tweaks to see if something might change still nothing. So I then loaded up the Q400 at ESSA just to see if it could of been an issue with EGKK or something but no still same result. This isn't just p3d though, I load up Eurotruck Sim to see if I am getting FPS drop on their and I am previously with my 970 I would get 60-100fps on ultra settings but now I am getting 15-20 fps. I go on youtube and find someone with exact same pc specs as me testing their p3d and they arent having the same issue I am. Please help! Specs: Intel i5 4690K 3.5ghz quadcore CPU, ASUS DUAL GTX1060 6G 6GB, 8GB RAM, Windows 7 64bit.

Hello, I recently purchased an EVGA GTX 1050TI 4GB. I went to run fsx after doing some tweaking and installing and a few restarts and did a connected flight deck in the aerosoft airbus A320. I was getting around 12-20 frames at Gatwick with UK2000 and ORBX global. We flew down to GCLP and my frames were around 12-20 for the whole flight. My friend on the other hand was getting 30-40 with FTX Open LC europe and REX4 textures UK2000 EGKK with integrated graphics however he has an I5 4690K processor but no graphics card. We both looked at each others settings in the cruise and I set mine the same as his and I was getting the same frames. The frames stayed the same even if I turned all my settings up. This morning we loaded up at Gatwick in the A319 to fly over to LEBL. This time I am getting 2-10 frames. Specs: GTX1050TI 4GB, Processor intel pentium E6000, 4GB RAM, 1GB Motherboard PLGA775, 500W Power supply and 500GB hardrive (I have used about 300GB) please help! Harry

Done its addon manager which is the issue

Ah although my p3d opens my addons for example ezdok, active sky, gsx and fsuipc are not working is there a way of adding them back to the dll.xml without screwing it up