Jump to content

Sign in to follow this  
Guest claucdn

737NG 600-700&800-900 - blank displays!

Recommended Posts

Guest claucdn

Hello,I have just re-installed my MSFS together with the PMDG 737NG 600-700 and the 800-900. The problem is that all displays are blank including the autopilot displays, in both 2D and VC everything is just blank! I am using the latest product versions, FS 9.1, "cold&dark" started PMDG and all but no result. Please help!

Share this post


Link to post
Guest tony21ny

i had the same problem about a month ago it was not only with pmdg but also my PSS, and some default. turns out when i uninstalled my fs9 update it removed some of my fonts from flightsim. give it a try with the new FSUIPC if not check your clock display on your default cessna, if that is not thier then you have the same problem i had. Solution go into your windowsfonts folder and reinstall the font (just drag it out then back in again)sorry i cant be more exact on which exact font it is but i just guessed on mine did them like 10 at a time so sry.Maybe one of devs can help you with the font name. good luck!

Share this post


Link to post

hi I had this problem with the new FSUIPC 3.44 ... going back to 3.411 fixed it for me . Rich

Share this post


Link to post
Guest claucdn

I am currently using FSUIPC 3.411. I will try to upgrade it to 3.44 but I don't know it will do any good because I was using 3.411 before.I have noticed that I don't have anything on the radio stack displays either, and also some switches are not working on the main console (eq. baro switch). The FS2004 default planes are working just fine, no issues there. Everything happens only to my PMDG installation. I have both 600-700 and the 800-900 upgrade. The strange phenomenon occurs for all PMDG planes.Please advise. Thank you all for your replies!

Share this post


Link to post
Guest claucdn

I have tried this. No result. Any other ideas? Please advise.

Share this post


Link to post
Guest claucdn

I tried installing FSUIPC 3.44, then I also tried removing PMDG and re-installing it again. But no results. What could it be, any ideas? Any help would be greately appreciated. Thanks!

Share this post


Link to post

Are you using a saved flight for start-up? Could you provide a screen shot of your overhead?Hope it helps,

Share this post


Link to post
Guest claucdn

No, just a random created flight. I will try to remove and reinstall the FS.

Share this post


Link to post

Ok,Before you reinstall could you please provide a screenshot of the overhead. Or check the battery voltage on the Electrical Panel and report back. Hope it helps,

Share this post


Link to post
Guest claucdn

No training mode used, just created a "random" flight not even a plan loaded I said that earlier.Well it looks like re-installation of my MSFS resolved the issue. The phenomenon was similar with the master avionics switch being off. The battery was connected, the engines were running, the air cond was on, the aircraft was powered no doubt about that, only that all the displays were not functional. The overhead panel was the only thing active and working ok. Strange anyway.But now everything is fine. Thanks everybody for your replies!Great product PMDG, the best on the market!PS: any updates forecasted for the 737NG?

Share this post


Link to post

PS: any updates forecasted for the 737NG? It's had more thna it's share ;-). Not too sure, we were told yes but in the sense of another add-on that being the awesome BBJ addition. Of course they have learned some new things since then so it certainly would be worth another addition IMO.Best Wishes,[h4]Randy J. Smith[/h4]http://www.rawbw.com/~bdoolin/shinault/southparkcartmad.gif[h3]PMDG 747![/h3]Caution! Not a real pilot, but do play one on TV ;-)ASUS KV8 DLX | AMD 3200 64 | 1 GIG PC 3200 DDR | GIGABYTE 5700 ULTRA | ViewSonic VP192b 19" |

Share this post


Link to post
Guest eldarion

I'm having this problem second time. First time I think I solved it by reinstalling both FS and PMDG.Screenshots (ready for TO, engines running, forgot to take one of throttle controls):http://www.tac.ee/~johan/ from there scrshot11, scrshot12 and scrshot13using XP, FS2004, PMDG 736/737, FSUIPC latest version (3.44 I think, registered!)

Share this post


Link to post

Beats me. You do have enough juice in the battery so it's not that problem. Do you have the avionics on? One way to check is to assign a key in the FS key assignment table to the AVIONICS TOGGLE and try while in the NG.Hope it helps,

Share this post


Link to post
Guest eldarion

already tried it. the vor/adf indicator turns on-off when switching avionics

Share this post


Link to post
Guest 2302rs

Try the following:Do s search in your FS9/modules folder for files containing in the filename. You should get 2 or 3 results.Delete them ALL (or move them to a different folder, but out of the FS9 root folder!).Now reinstall the latest fsuipc version and re-activate it if you use the full version.That worked for me, hope it helps you too.

Share this post


Link to post
Guest mats01

Hello, I also have the same problems with 737NG addon!!!And I was installing the PMDG 737 as follow:1. Install the PMDG_737_THE_NEXT_GENERATION_V1-3_Full Version (First Install) first!!2. Install the PMDG_737_800_900 V1.1 file !!3. Install the PMDG_737_800_900_Service_Update_14. Final Install PMDG_737_800_900_Model_UpdateBut no help even after install the last version of FSUPIC 3.44Do have anyone or PMDG staffs can help to solve this problems?My flight sim version is ver9.1Yours,MATS

Share this post


Link to post
Guest eldarion

could you write the file name again? and reinstalling 736/737 didn't work for me either (didn't reinstall fsuipc)

Share this post


Link to post
Guest 2302rs

You may have old fsuipc "remnants" corrupting the new version. Get rid of every file having fsuipc in its name and reinstall the newest version.Takes about 15 seconds. :-)

Share this post


Link to post

Matts,Why did you install the 1.1 service update if you have version 1.1 of the 800/900 package? That may contribute to your problem. Try running the PMDG removal tool, Go in and delete the FSUIPC.dll from your FS9/modules folder after running the removal tool. Then install the PMDG 737 600/700 Ver 1.3, the 800/900 Ver 1.1 and the 600/700 optional model update and see if the problem is gone. You may have to update the FSUIPC.dll if you are running FS9.1 as the one that installs with the PMDG 737 is not current and can cause the FSUIPC version error message. RegardsPaul Gollnick :-cool Technical Operations/Customer Operational SupportPrecision Manuals Development Groupwww.precisionmanuals.comhttp://www.precisionmanuals.com/images/forum/devteam.jpg

Share this post


Link to post
Guest mats01

>Matts,>>Why did you install the 1.1 service update if you have version>1.1 of the 800/900 package? That may contribute to your>problem. Try running the PMDG removal tool, Go in and delete>the FSUIPC.dll from your FS9/modules folder after running the>removal tool. Then install the PMDG 737 600/700 Ver 1.3, the>800/900 Ver 1.1 and the 600/700 optional model update and see>if the problem is gone. You may have to update the FSUIPC.dll>if you are running FS9.1 as the one that installs with the>PMDG 737 is not current and can cause the FSUIPC version error>message. >>Regards>Paul Gollnick :-cool >Technical Operations/Customer Operational Support>Precision Manuals Development Group>www.precisionmanuals.com>http://www.precisionmanuals.com/images/forum/devteam.jpgDear Mr.Paul Gollnick, I was already following the method you leave for me. But Still can't see anythings on PFD,ND,ECIAS,etc and no fuctions for any switchs. I did delete the FSUPIC after running the PMDG removal tool and the last FSUPIC.dll 3.44 but not a registration version!! Any advice? Please help......

Share this post


Link to post
Guest eldarion

I think I've got an idea that's causing these problems. It might be PSS's airbus. I did a complete reinstall to FS2004, then installed 736/737 NG and it worked fine. Then I installed PSS A319/320/321/330/340 package that worked OK. But then trying to fly B736 again, all displays were blank.

Share this post


Link to post
Guest eldarion

no offence, but I'm quite experienced concerning computers (sry about the grammar). I confirmed having the latest (3.45) FSUIPC.I copied all PSS files manually to their correct locations so the installer couldn't overwrite anything. Before this 736NG worked fine (with a registered version of FSUIPC). After a short flight with a PSS airbus, installed the "cold & dark" flight to FS/flights/others and tried 736NG again. after switching battery and applying ground power the displays were blank. exited FS and reinstalled the original default flight. displays remained to stay blank.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  
×
×
  • Create New...