I've got a weird situation going on whereby my PFD, ND & Eicas displays in the VC mode are blurry or hard to read. All other panels including the overhead, and center console are fine at 1920 X 1080 resolution. When I switch to 2D mode, the gauges are real crisp and the resolution is great. Anybody know what could be causing this to happen as I have never experienced this before. Regards,jack

A screenshot could help a lot for us to help you. I haven't seen any blurryness in my displays but if you zoom out they are a bit.. pixelated, if it's the right word.And just another thing: Signing your post with your full name would be appriciated.Matja

I wish I knew how to upload a screen shot. Unfortunately, this is all the info I have, however, what is strange is the other screens around the PFD, ND & Eicas which are all in the middle and all blurry, are fantastic.....Very strange. Regards,jack noulet

Try turning down the brightness on the displays, that might help.

I've got a weird situation going on whereby my PFD, ND & Eicas displays in the VC mode are blurry or hard to read. All other panels including the overhead, and center console are fine at 1920 X 1080 resolution. When I switch to 2D mode, the gauges are real crisp and the resolution is great. Anybody know what could be causing this to happen as I have never experienced this before. Regards,jack

This might help,Make sure under settings for your graphics under the first tab that you have Global Textures to very high.Josh Katz

Thanks everyone for your suggestions. I tried all of the above and it's only the PFD, ND & Eicas screens that are blurry. All others are crystal clear and this only happens in the VC mode and not in the 2D. The only other blurry is the control column that has the MD-11 logo on it. This never happened before and I was wandering if by chance something might be wrong with my gauge files for the PFD, ND & Eicas!! Also, when in VC mode and I click any of the 3 panels to enlarge them, they all come up with perfect clarity. This seems really odd to me. Anymore ideas?? Regards,jack noulet

Are you using the ENB Series MOD (HDR-PLUG-in)?

Are you using the ENB Series MOD (HDR-PLUG-in)?

No Dan, I am not using the ENB MOD or have I added anything other than increasing the Global Scenery to Max setting and decreasing the monitor brightness. Regards,jack noulet

Decrease the DU brightness, is what i intended to suggest earlier. The controls are to your left.

Decrease the DU brightness, is what i intended to suggest earlier. The controls are to your left.

Dan, Please excuse my ignorance, but I'm having a little difficulty locating where the DU brightness is! Could you assist me further as I would appreciate it..Thanks and Regards,Jack noulet

My mistake, I must have been thinking 747, the controls are on the display control panel (SDCP) in the center console:

Thanks Dan,I'll give it a shot and let you know.Regards,jack noulet

Dan,Thanks for the graphic. I tried your suggestion and I'm still at a loss as to what may be causing this phenomenal..Regards,jack noulet

One other question that I have and that is: Are the three main displays notably the PFD, ND and the Engine monitoring screen driven by a separate gauge file and if so, could this possibly have been corrupted??Regards,jack noulet

One other question that I have and that is: Are the three main displays notably the PFD, ND and the Engine monitoring screen driven by a separate gauge file and if so, could this possibly have been corrupted??Regards,jack noulet

Jack!, can