August 5, 201114 yr Hi, Although manual states that NGX is fully compatible with FSUIPC it seems that FSUIPC commands listed below don't work with NGX: Spoilers Arm On Spoilers Arm Off Spoilers On Spoilers Off Gear Up Gear Down Is it a bug? Above commands work perfectly with 747X & MD11. PS. Please, do not advise to not use FSUIPC because it is necessery to fly 747X & MD11 with my yoke. Czarek Niedzinski Intel i7 2600K @ 4.6 GHz | Asus P8Z68-V Pro | 2x4GB Corsair DDR3 @ 1860 MHz | EVGA GeForce GTX 295 | Corsair 850TXEU - 850W | Windows 7 Ultimate 64bit
August 5, 201114 yr Noticed the same thing here. My spoilers actually work but backwards. I think you just need to create a profile for the NGX to get this stuff to work properly. Mark. Mark CYYZ
August 5, 201114 yr Commercial Member All mechanical systems are custom and any action has to be filtered. E.g. is the hydraulic system pressurised ? Etc.) Please create your PMDG key commands and THEN you can assign buttons to those key commands from FSUIPC. ==================================== E M V Precision Manuals Development Group ====================================
August 5, 201114 yr Author This is a kind of workaround (there isn't for example gear up or spoilers disarm PMDG commands) but I can live with this. Czarek Intel i7 2600K @ 4.6 GHz | Asus P8Z68-V Pro | 2x4GB Corsair DDR3 @ 1860 MHz | EVGA GeForce GTX 295 | Corsair 850TXEU - 850W | Windows 7 Ultimate 64bit
August 5, 201114 yr This is a kind of workaround (there isn't for example gear up or spoilers disarm PMDG commands) but I can live with this. CzarekI have a button mapped in FSX for gear up, works great. I have my spoiler mapped to an axis on my yoke in FSX, works fine. George Morris
August 5, 201114 yr Author yeah, but i can't find FSX command GEAR UP - there is only GEAR UP/DOWN... Czarek Intel i7 2600K @ 4.6 GHz | Asus P8Z68-V Pro | 2x4GB Corsair DDR3 @ 1860 MHz | EVGA GeForce GTX 295 | Corsair 850TXEU - 850W | Windows 7 Ultimate 64bit
August 5, 201114 yr Not at my setup, but I believe that's the correct mapping. When I toggle switch up, landing gear goes up. George Morris
August 5, 201114 yr Author ok, I have managed this issue in EMV way, thx. Czarek Intel i7 2600K @ 4.6 GHz | Asus P8Z68-V Pro | 2x4GB Corsair DDR3 @ 1860 MHz | EVGA GeForce GTX 295 | Corsair 850TXEU - 850W | Windows 7 Ultimate 64bit
August 6, 201114 yr Czarek, could you please elaborate how exactly you did it?I don't want to use "toggle gear" for this, but "gear up" / "gear down" (2-way switch on my yoke), Thanks,Jörn
August 6, 201114 yr i would like to use gear up and gear down on separate command and don't succeed with fsuipc!it would be great you explain, czarek!thanks,Bernard Benard DEVEAUTOUR pmdg's 747 and 737 ngx fan!
August 6, 201114 yr Author It seems with NGX we have to live with GEAR UP/DOWN toggle command only. As EMV said "All mechanical systems are custom and any action has to be filtered. E.g. is the hydraulic system pressurised ? Etc. I'm affraid the separate up & down commands are not modelled neither in NGX nor FSX... The same with spoilers arming - we have to use toggle only. PS. For gear operations I use one of the quadrant levers - using FSUIPC I send keystokes "G" when the lever will be placed in lower or upper position. There isn't the same like separate comands, but it works when you don't mistake the initial position. Czarek Intel i7 2600K @ 4.6 GHz | Asus P8Z68-V Pro | 2x4GB Corsair DDR3 @ 1860 MHz | EVGA GeForce GTX 295 | Corsair 850TXEU - 850W | Windows 7 Ultimate 64bit
August 6, 201114 yr I'd like you also point to LINDA, where several functions are already included and more to come... Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
Create an account or sign in to comment