February 25, 201214 yr Hi guysHave posted on their support forum, but not getting much feedback there. Guess they're closed for the weekend;-)http://forum.simflight.com/topic/70921-another-zero-traffic-problem/Can any MTX users please have a look at either the dll.xml or exe.xml to see if there should be any MTX entries there. I don't have any.Whatever I do, I just can't get ANY My TrafficX AI to show up. Can get FSX default AI, so it's not an FSX fault.Any/all ideas welcome;-) Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)
February 25, 201214 yr HelloMyTraffic X has no entries in dll.xml or exe.xmlThe only entry is in your FSX.cfg which you can set either through the MyTrafficX Communicator program or by manually adding it.SimObjectPaths.0=SimObjectsAirplanesSimObjectPaths.1=SimObjectsRotorcraftSimObjectPaths.2=SimObjectsGroundVehiclesSimObjectPaths.3=SimObjectsBoatsSimObjectPaths.4=SimObjectsAnimalsSimObjectPaths.5=SimObjectsMiscSimObjectPaths.6=MyTrafficAircraftUser Objects=Airplane, Helicopter
February 25, 201214 yr Phil, I do not have either of those files. I don't know if you saw this post http://forum.simflight.com/topic/61643-a-tool-to-find-blocking-incompatible-schedule/might be the problem.It is very easy to reinstall also as a last resort. Just rename the existing MTX folder to mytrafficOLD or whatever you prefer and run the installer again.Hope it helps,Glen
February 25, 201214 yr Author Thanks hadn't seen that other post, will check it out.have tried numerous reinstalls. Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)
February 25, 201214 yr Phil, I do not have either of those files. I don't know if you saw this post http://forum.simflig...tible-schedule/might be the problem.It is very easy to reinstall also as a last resort. Just rename the existing MTX folder to mytrafficOLD or whatever you prefer and run the installer again.Hope it helps,GlenHelloYou do have themProviding you have show hidden files, folders, and drives turned on you will find them inC:UsersyourusernameAppDataRoamingMicrosoftFSX
February 25, 201214 yr HelloYou do have themProviding you have show hidden files, folders, and drives turned on you will find them inC:UsersyourusernameAppDataRoamingMicrosoftFSXHello Mad Dog, You are correct,they are there. I was not clear in my post. There is nothing relating to MTX in either of those files.Sorry for the confusion,Glen
February 25, 201214 yr Author Tried everything in that thread, but still no AI traffic with MTX5.4 ;-(Oh well, at least i get slightly better frame rates without traffic - very lonely skies though;-) Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)
February 25, 201214 yr Tried everything in that thread, but still no AI traffic with MTX5.4 ;-(Oh well, at least i get slightly better frame rates without traffic - very lonely skies though;-)Have you added Mytraffic X to your scenery library?
February 25, 201214 yr Author [Area.224]Title=MyTrafficLocal=MyTrafficActive=TRUERequired=FALSELayer=224 Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)
February 25, 201214 yr Try disabling aircraft shows shadows. This has worked for many. Also, make sure MyTraffic is located below all other scenery folders in the Scenery Library. I have mine set just above Propeller Objects. The MyTraffic folder contains many AFCADS that are used to handle the flight plans for the MyTraffic program. So you want this sitting below any other scenery installed so your addon scenery will not be compromised.Best regards,Jim
February 26, 201214 yr Author Try disabling aircraft shows shadows. This has worked for many. Also, make sure MyTraffic is located below all other scenery folders in the Scenery Library. I have mine set just above Propeller Objects. The MyTraffic folder contains many AFCADS that are used to handle the flight plans for the MyTraffic program. So you want this sitting below any other scenery installed so your addon scenery will not be compromised.Best regards,JimMissed yours yesterday Jim, thsnks.Will try the shadows off... Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)
February 26, 201214 yr I had the same issue. This checklist helped me. http://forum.simflig...king-checklist/Turned out I had missed something simple! Edited February 26, 201214 yr by ZachLW ___________________________________________________________________________________ Zachary Waddell -- Caravan Driver -- Facebook: http://www.facebook.com/zwaddell Avsim ToS Avsim Screenshot Rules
February 26, 201214 yr Author I had the same issue. This checklist helped me. http://forum.simflig...king-checklist/Turned out I had missed something simple!That looks pretty old Zack, will try it now, thanks... Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)
February 26, 201214 yr It is, but My Traffic hasn't changed. It's very much valid, don't skip a step ___________________________________________________________________________________ Zachary Waddell -- Caravan Driver -- Facebook: http://www.facebook.com/zwaddell Avsim ToS Avsim Screenshot Rules
February 27, 201214 yr Can you run Ultimate Traffic 2 as well as MTX? http://fs2crew.com/banners/Banner_FS2Crew_MJC_Supporter.png Wayne HART
Create an account or sign in to comment