Hi,

I'm having god results running DX-10 on my rig. One thing that bothers me a little is the lack of V-sync in DX-10 preview mode. A definitive answer whether v-sync does or doesn't work in DX-10 didn't show up in a search on this forum.

 

So my question si if anybody has it working? If so, how?

 

My NI settings:

- Vertical Sync Tear Control: Standard

- Vertical Sync: 1/2 refresh rate

- 8x Sparse Grid SS

- Transparency Multi Sampling: Enabled

 

fsx.cfg:

- 30 frames locked in sim

- //ForceFullScreenVSync=1 (tried enabling too)

- MultiSamplesPerPixel=4 (just to be sure)

- MultiSampleQuality=8 (just to be sure)

- FIBER_FRAME_TIME_FRACTION=0.1

- TEXTURE_BANDWIDTH_MULT=40

 

Looking forward to your opinions.

Hey Lenny:

These figures look just fine. Remember - vsync only works in full-screen mode, and I think that's the same when using DX9. I would suspect that vsync will have a hard time working effectively if one cannot hold 30 easily.

 

- Vertical Sync Tear Control: Standard

- Vertical Sync: 1/2 refresh rate

- 8x Sparse Grid SS

- Transparency Multi Sampling: Enabled

 

fsx.cfg:

- 30 frames locked in sim

- //ForceFullScreenVSync=1 (tried enabling too)

- MultiSamplesPerPixel=4 (just to be sure)

- MultiSampleQuality=8 (just to be sure)

- FIBER_FRAME_TIME_FRACTION=0.1

- TEXTURE_BANDWIDTH_MULT=40

 

My suggestion if it is having a hard time holding 30, or running ok, but with hesitations or the odd stutter, or being unable to manage high slider settings - would be to lower 8x SGSS down to 4SGSS, and move the TBM up to 80, and water to 2x Med. (5)., and pulling some (AG and SC) back a notch in order to give it some breathing room.

I found an interesting thread at simforums.com regarding v-sync, nVidia drivers and Inspector are also touched upon.

I also cant get any vsync working in DX10 - in DX9 it worked no problem..

I have the newest nvidia drivers installed - wonder if its that thats causing it from working

Can you post your fsx.cfg and NI settings, please, Phil?

Yes sure Paul,

 

[bUFFERPOOLS]

Usepools=0

 

[JOBSCHEDULER]

AffinityMask=14

 

[GRAPHICS]

HIGHMEMFIX=1

MultiSamplesPerPixel=4

MultiSampleQuality=8

SHADER_CACHE_PRIMED=1693500672

TEXTURE_MAX_LOAD=4096

NUM_LIGHTS=8

AIRCRAFT_SHADOWS=1

AIRCRAFT_REFLECTIONS=1

COCKPIT_HIGH_LOD=1

LANDING_LIGHTS=1

AC_SELF_SHADOW=1

EFFECTS_QUALITY=2

GROUND_SHADOWS=0

TEXTURE_QUALITY=3

IMAGE_QUALITY=0

See_Self=1

Text_Scroll=1

SHADER_CACHE_PRIMED_10=1693500672

D3D10=1

 

[TERRAIN]

LOD_RADIUS=6.500000

MESH_COMPLEXITY=75

MESH_RESOLUTION=23

TEXTURE_RESOLUTION=29

AUTOGEN_DENSITY=2

DETAIL_TEXTURE=1

WATER_EFFECTS=5

 

[Display]

ChangeTime=4.000000

TransitionTime=4.000000

ActiveWindowTitleTextColor=255,255,255

ActiveWindowTitleBackGroundColor=0,28,140,64

NonActiveWindowTitleTextColor=255,255,255

NonActiveWindowTitleBackGroundColor=24,33,87,64

InfoUpperRightTextColor=255,0,0

InfoUpperRightBackGroundColor=0,0,0,0

InfoLowerLeftTextColor=255,255,255

InfoLowerLeftBackGroundColor=255,0,0,128

InfoLowerRightTextColor=255,255,255

InfoLowerRightBackGroundColor=255,0,0,128

InfoBrakesEnable=True

InfoParkingBrakesEnable=True

InfoPauseEnable=True

InfoSlewEnable=True

InfoStallEnable=True

InfoOverspeedEnable=True

BLOOM_EFFECTS=0

SKINNED_ANIMATIONS=1

TEXTURE_BANDWIDTH_MULT=80

UPPER_FRAMERATE_LIMIT=30

WideViewAspect=True

 

[Main]

FIBER_FRAME_TIME_FRACTION=0.15

User Objects=Airplane, Helicopter

SimObjectPaths.0=SimObjects\Airplanes

SimObjectPaths.1=SimObjects\Rotorcraft

SimObjectPaths.2=SimObjects\GroundVehicles

SimObjectPaths.3=SimObjects\Boats

SimObjectPaths.4=SimObjects\Animals

SimObjectPaths.5=SimObjects\Misc

Maximized=1

Location=440,151,1480,929,\\.\DISPLAY1

HideMenuNormal=0

HideMenuFullscreen=1

ProcSpeed=18803

PerfBucket=7

 

[DISPLAY.Device.NVIDIA GeForce GTX 570.0]

Mode=1920x1080x32

Anisotropic=1

 

NVIDIA IMAGE HERE

www.lime-it.co.uk/downloads/nvid.jpg

Hi Phil,

Let me jump in here with a couple of comments as Paul has been fairly busy lately. I noticed you do not have AA turned on in FSX by the fact I only see the following in your config:

 

[DISPLAY.Device.NVIDIA GeForce GTX 570.0]

Mode=1920x1080x32

Anisotropic=1

 

There should be an AntiAlias=1 entry here. That must be turned on with DX10. You have a very powerful system and it can handle LOD 6.5 but that is a performance killer for sure! You didn't include your Traffic Manager settings but I would follow my settings:

 

[TrafficManager]

AirlineDensity=40

GADensity=14

FreewayDensity=10

ShipsAndFerriesDensity=0

LeisureBoatsDensity=0

IFROnly=0

AIRPORT_SCENERY_DENSITY=1

 

Best regards,

Jim

I reckon there's a number of settings that are too high, Phil - 4097 textures, BP=0 and LOD 6.5. The 570 and a 4.6 proc will barely support those. The saving grace is the fact that you have only a single monitor to feed.

 

Wind them back, add in the AA as Jim suggests, and then see where she sits. The greater the graphics load - the less able the Inspector will be to control vsync. Too, I would turn off FXAA. I didn't find any benefit during my testing, and in fact it gave poorer AA - BUT it may work better on your system...

 

I know I'm running 3840x1024, 4.9gig and a 580, but I cannot support 4096, nor a 6.5 LOD or BP=0 all at the same time, and without knowing you traffic load - I can only speculate that these are the reasons for lack of vsync.

Jim, Paul -

 

Thanks for taking the time to have a look at this for me.

This DX10 stuff is a whole new ball game.

 

I'll apply what you two suggested and report back later.

 

Once again many thanks

Jim, Paul,

 

I was just finishing out trying your suggestions and it was still tearing.

Then as you will have seen that DisablePreload=1 post appeared and solved it straight up.

 

Thanks for helping me out guys

as you will have seen that DisablePreload=1 post appeared and solved it straight up.

 

I saw that! I can't believe there are more brilliant guys than me and Paul! I was positive we knew everything! :LMAO: I have thrown it into my fsx.cfg too even though I wasn't getting the tearing others are experiencing. Will see how it goes... Glad to hear you have your problem(s) fixed!

 

Best regards,

Jim