Search the Community

Hello, I recently got the Airbus X Extended add-on for FSX but my textures are invisible in DX-9 mode. When I switch on DX-10 preview mode, however, my textures become visible again. I wish I could use Airbus X in DX-9 mode so I can use ENBseries again. Here is a screenshot of what my textures look like for Airbus X with DX-9: My current add-ons are: GEX USA UTX USA REX Essential Squawk Box FSUIPC Computer specs: Manufacturer: TOSHIBA Model: Satellite S855 Processor: Intel ® Core i5-3210M CPU @ 2.50GHz 2.50 GHz Installed memory (RAM): 6.00 GB (5.89 GB usable) System type: 64- bit Operating System, x64 based processor

Hi, I recently unchecked the DX-10 preview box in FSX (back to dx-9) so I could use Enbseries again. Soon after I realized that I really really wanted DX-10 back. I was about to check the DX-10 preview box again when I noticed there was no box for it anymore. I am wondering if there is any way to get DX-10 back in FSX after the box is unchecked?

There has been a lot of discussion lately about DX-10 and fixes, tweaks and hints and as a result, we thought we would open a forum to cover this area of FSX specifically. Welcome! We will start moving existing DX-10 messages over to this forum shortly.

Hi, I'm having god results running DX-10 on my rig. One thing that bothers me a little is the lack of V-sync in DX-10 preview mode. A definitive answer whether v-sync does or doesn't work in DX-10 didn't show up in a search on this forum. So my question si if anybody has it working? If so, how? My NI settings: - Vertical Sync Tear Control: Standard - Vertical Sync: 1/2 refresh rate - 8x Sparse Grid SS - Transparency Multi Sampling: Enabled fsx.cfg: - 30 frames locked in sim - //ForceFullScreenVSync=1 (tried enabling too) - MultiSamplesPerPixel=4 (just to be sure) - MultiSampleQuality=8 (just to be sure) - FIBER_FRAME_TIME_FRACTION=0.1 - TEXTURE_BANDWIDTH_MULT=40 Looking forward to your opinions.

I am going to apologize up front for asking this question, but I have tried everything (including contacting Friendly Panels). Friendly Panels "answer" was DX is a "preview" and we do not support it! I want to thank Steve Parsons (and others) again for all their work on DX10. I have installed tested and reinstalled V3.2.2 patches, and I still cannot find a solution. I am going to provide links for 4 pictures on my King Air 350 wing tip navigation lights, two with DX and two without DX on. I will also include here the aircraft.cfg changes related to lighting. These are the changes I made to aircraft.cfg: Default King Air which Friendly Panels builds from: [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit light.0 = 1, 0.00, 0.00, 0.00, ballast light.1 = 2, 0.00, 0.00, 0.00, ballast light.2 = 3, 0.00, 0.00, 0.00, ballast light.3 = 3, 0.56, -28.41, 1.97, fx_navred , light.4 = 3, 0.56, 28.41, 1.97, fx_navgre , light.5 = 3, -31.20, 0.00, 9.75, fx_navwhi , light.6 = 2, 0.89, -28.48, 1.87, fx_strobe , light.7 = 2, 0.89, 28.48, 1.87, fx_strobe , light.8 = 1, -26.30, 0.00, 9.89, fx_beacon , light.9 = 2, -4.55, 0.00, -1.85, fx_strobe , light.10 = 4, 4.91, 0.00, 1.64, fx_vclight, King Air aircraft.cfg created by Friendly Panels and modified by me: [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit light.0 = 1, 0.00, 0.00, 0.00, ballast light.1 = 2, 0.00, 0.00, 0.00, ballast light.2 = 3, 0.00, 0.00, 0.00, ballast ;light.3 = 3, 0.56, -28.41, 1.97, fx_navred , ;light.4 = 3, 0.56, 28.41, 1.97, fx_navgre , ;light.5 = 3, -31.20, 0.00, 9.75, fx_navwhi , ;light.6 = 2, 0.89, -28.48, 1.87, fx_strobe , ;light.5 = 2, 0.89, 28.48, 1.87, fx_strobe , ;light.8 = 1, -26.30, 0.00, 9.89, fx_beacon , ;light.9 = 2, -4.55, 0.00, -1.85, fx_strobe , light.3 = 4, 4.91, 0.00, 1.64, fx_vclight, I have NOT changed anything else in the aircraft.cfg files for either the Default or the Friendly Panels version of the King Air. If I change the Friendly Panel lines for nav and strobe to not be comments, I get double lights on external view and still no view of wingtip lights from cockpit. I can not get my wing tip navigation and strobe lights to work on the Friendly Panels version, when I try and view them from the cockpit EITHER virtual or 2D. I did try it with the above changes without DX and they work OK (can be seen from cockpit). In both NoDX and DX they can be seen from the external views. ANY ideas or suggestions would be GREATLY appreciated. The links for the pictures are: No DX-10 left and right wing tips from the cockpit: https://www.box.com/s/uode4cqj9jdf12g8p1mf https://www.box.com/s/4o2wlk28ltwxtfgzku43 With DX-10 left and right wing tips from the cockpit: https://www.box.com/s/na4rqtn07ub8odulxcc2 https://www.box.com/s/2z0kgaxpenqxcpzxhypt ANY ideas or suggestions would be greatly appreciated. I have read ALL of the documents on AVSM regarding DX-10 and searched the Forums for similar circumstances but I can not seem to find an answer. THANKS!!!!