April 21, 201313 yr Many thanks for this. There seem to be less options for opening / closing the various doors. Is this deliberate? Although they can be manipulated within the VC, I prefer to use my TT Panel. team did you get a chance to look at those other doors & perhaps a toggle action for all ? thanks for now, cheers john martin
September 26, 201312 yr Hello Pero!I fly the Airbus X Ext with hep of LINDA and 2.3 Module and some self build usb-panels (overhead, FCU) and everything runs fine until V1.10.But now Aerosoft updated the Bus to V1.15 and changed the Commands for Avionics ND/PFD/Upper ECAM/Lower ECAM-Displays with the result that the encoders in my panels producing only a sound-´click´but no reaction.In V1.15 in the virtuel cockpit these encoders now not only on/off-buttons - they now dim the brigthness of displays too. How can i find / change the commands to make it function now or is there of chance that a updated module will be released? this would be really great. Thanks in advance and best regards Tom
September 29, 201312 yr I can`t land with airbus extended v 1.15, since shortly before the runway (100-200ft altitude) switches the autothrottle full power (may be go around mode) and landing is impossible (no longer reach switched off autothrottle and power). And it happens all the time, despite this that the whole landing procedure previously made (gears down and full flaps, also landing cheklist by copilot completed). What am i doing wrong?
October 16, 201312 yr Hello! Is there a way to get this profile to work with MCP 1 combo? I have Linda v1.13 and this airbus module v2.3 but only SPD, HDG, ALT rotaries are working. I'm new with this (MCP1 and Linda) so I'm not sure if this is even possible to get work with MCP 1. I explored module settings a bit in Linda and there were many actions for buttons assigned but when I tried in FSX only rotaries mentioned above worked (oh and comms part is actually working too). It would be great to be able to use all functions with this. Until that I have to manage with what I have. ^_^ Thanks in advance! -Arto
October 20, 201312 yr Author new modul version v.2.3 --> v2.4added OVHD int lightsXPDR bugfix as for the questions above: @Tomtomnrw71 Is your question selved with this update? @eke_flx Isn't this more a question to Aerosoft support? Why do you think LINDA is involved? Checked your assignings? @Arto yes, should work with Combo I also. As I have only a Combo II I could only give assignments for this. YOu have to make your own assignments for your Combo I. Simply choose your COmbo and assign functions as you do it with joysticks also. Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
October 26, 201312 yr Wonderful! Thank you very much! Now all switches of my homecockpit are funcionable again and with Linda 1.13, the new 2.4 module and the Bus V1.15 it runs faster than ever before.
December 5, 201312 yr Can someone tell me if is possible to synchronize MCPPRO displays from Goflight with the MCP values on the Airbus X Extended. I manage to work with all knobs and buttons and they work almost perfect but the displays values (ALT - HDG - IAS) are not synchronized. Many thanks
April 18, 201412 yr Hi everybody, this is a very helpfull program :rolleyes: But is it true that FSUIPC works with airbus x extended ?! I hope you can help me, your FSlikerX
April 18, 201412 yr Author See answer in the other post you made ... thanks Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
April 23, 201412 yr Hi! How do I detect if one of the OVHD Lights are on, when they are toggled in VC (and not with a hardware button) ? See this post for more details. Many thanks in advance! Regards, Patrick Krolzik
April 26, 201412 yr Hi All Just a quick query. I am working with the SDK and am trying to find the Lvar to determine whether the VS field is dashed or contains values (VVS or FPA)? I have tried all those listed in SDK2.4 but none relate to this value. Any suggestions? Andrew Gransden Scotland, UK LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew
April 27, 201412 yr Problem solved. There are 2 Lvars that govern the display of the VS field on ABX: IF FCU_Managed_VSdisp_override == 1 OR AB_AP_KNOBALT == 1 THEN {display values} ELSE {display dashes} END Andrew Gransden Scotland, UK LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew
May 4, 201412 yr Good Day Need ur help on a silly Question I am new with the Airbus X Extended from aerosoft , I finally decided to fly other |Aircrafts and enjoy I have one problem I dont know how to adjust the Altitude I went on there website I looked on google every one says use the Middle mouse button ,, But I cant use the Mittle mouse Button coz Trackman Marble Trackball, my mouse is Like this Please look http://www.chairlines.com/Mice/Logitech-Trackman-Marble-Mouse So I ask you from your experience how can you help me please lol many thank Firas Salim"The joy of being is the joy of being conscious. Uploaded with ImageShack.us
May 6, 201412 yr OK Never Mind I got me an old Mouse that has the Middle click in it working with 2 Mouses lol it would have been nice if it was a normal Left click or right click Firas Salim"The joy of being is the joy of being conscious. Uploaded with ImageShack.us
Archived
This topic is now archived and is closed to further replies.