October 12, 201510 yr Hi, Just installed the new 1.7 The firs time I ran it within P3Dv3 all seemed fine, closed the main window, crash No every time I try to open FS2Crew, it crashers P3Dv3 Clean install of 777 and I waited for this new version of 777 (1.7) Any ideas? Installed as admin etc, never had problems within fsx or P3d v2.5 David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 12, 201510 yr Ya it got me too, those crashes, As soon as I push the button to start FS2crew, Bloop! And just like you, the first time ran great? I'm too tired right now, but tomorrow I'm going to uninstall the 777, FS2 crew and start again. I goofed with mine to try to get FS2C to work when V3 came out. So, I'm thinking that is it, I don't know if that applies to you, but just a thought. David Warner
October 12, 201510 yr Author Never installed any FS2crew into v3, completely clean. Ive gone into the main config window and disabled it...rebooted....enabled it...rebooted.....Nothing, now it does not even open/crash...nothing! David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 12, 201510 yr Commercial Member Never installed any FS2crew into v3, completely clean. Ive gone into the main config window and disabled it...rebooted....enabled it...rebooted.....Nothing, now it does not even open/crash...nothing! Send me a Support Ticket via: www.fs2crew.com We'll do a remote desktop. I suspect your panel.cfg is messed up, but we'll see. Cheers, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
October 12, 201510 yr Author I did change some setting in the panal the first time and that's when it all went wrong. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 12, 201510 yr Author UN-installed FS2Crew and the 777 Re-installed and this time did NOT change anything within the config e.g. call gear up. All seems fine now. Can I/we back up a file so if I now change some setting and it screws up again I can copy a back up back in. ? David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 12, 201510 yr Commercial Member Glad you got it sorted. The config settings are saved in the two INI files in this folder: C:\Users\***your user name****\AppData\Roaming\FS2Crew2010\Versions\PMDG777\SavedData I'm guessing you're running VPilot, and you changed the On-Line ATC Client setting to 'Yes'? If running VPilot in Prepar 3D V3, that setting needs to be set to No. B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
October 12, 201510 yr Author NO not running VPilot, Happy to report just did first flight KTPA - KMIA all went well. Thanks for the update 1.7 with v3 support. :smile: :wub: Just need rebooted back now Bryan. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 13, 201510 yr Commercial Member Reboot is coming out late this week once the dust from the 777 settles :smile: B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
October 13, 201510 yr Author Reboot is coming out late this week once the dust from the 777 settles :smile: Really look forward to it. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 16, 201510 yr I also come from a totally clean 777 and it crash hitting the autofeather main menu button. Strange thing is that Virtual Avionics tells me that Databroadcast is not enabled but it looks like its in there by default now under SDK in PDMG777Xoptions.ini Strange EDIT: will try a test flight without immersion and VA , :wink: Michael Moe Michael Moe
October 17, 201510 yr Commercial Member Strange thing is that Virtual Avionics tells me that Databroadcast is not enabled but it looks like its in there by default now under SDK in PDMG777Xoptions.ini 1. The "enable sdk" lines in PMDG Options is not there by default The FS2Crew installer has to add that line. If it doesn't show up, it usually means you have a write permission issue. Ensure everything is run with Admin rights. 2. Your crash sounds like your panel.cfg is messed up. Uninstall the PMDG 777 aircraft. Manually delete the leftover 777 folder in the "SimObjects" folder. That's important. Re-install the 777 and re-enable FS2Crew. You are now totally "clean". Your panel.cfg will be clean. 9 times out of 10, that solves it. B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
October 17, 201510 yr 1. The "enable sdk" lines in PMDG Options is not there by default The FS2Crew installer has to add that line. If it doesn't show up, it usually means you have a write permission issue. Ensure everything is run with Admin rights. 2. Your crash sounds like your panel.cfg is messed up. Uninstall the PMDG 777 aircraft. Manually delete the leftover 777 folder in the "SimObjects" folder. That's important. Re-install the 777 and re-enable FS2Crew. You are now totally "clean". Your panel.cfg will be clean. 9 times out of 10, that solves it. Hi Bryan A reinstall did the trick .Thanks Michael Moe Michael Moe
October 17, 201510 yr Commercial Member Glad you got it sorted. Your panel.cfg was no doubt messed up. B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
October 17, 201510 yr Glad you got it sorted. Your panel.cfg was no doubt messed up. strange thing is that VA interface still says SDK Data is not enabled but it is and FS2crew is working just fine :wink: Michael Moe Michael Moe
Create an account or sign in to comment