April 17, 201610 yr Yes, FCDU is the ACARS gauge from FSCaptain software. Edit:I copy from backup clean panel.cfg; then run Config Manager again and activate FS2Crew and then install FSCaptain ACARS - now it works. One more question: does the FS2Crew FAILURES generate independently of NGX failures which are set in FCDU? In other words: even if I have NGX failures "OFF", but in FS2Crew CFG Failures "ON" - should I expect failure? Lukasz Trzaskowski
April 17, 201610 yr Author Commercial Member I copy from backup clean panel.cfg; then run Config Manager again and activate FS2Crew and then install FSCaptain ACARS - now it works. Glad you got it working :smile: Your panel.cfg was messed up. I looked at it and you had an extra set of Window 21 and 22's that didn't appear to load anything. One more question: does the FS2Crew FAILURES generate independently of NGX failures which are set in FCDU?In other words: even if I have NGX failures "OFF", but in FS2Crew CFG Failures "ON" - should I expect failure? Nope, FS2Crew does not generate failures. With FS2Crew Failures set to "OFF", the FO will not announce any failures that he detects. Cheers, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
April 17, 201610 yr Thanks Bryan, ...but...strange thing. I've just made first NGX flight with new FS2C version and after shutdown FSX, Config Manager says that FS2C is inactive (System Check also reports failed panel.cfg) However, when I load a free flight again, everything works. That's strange... And one more issue I observed while flight: - on approach, when I ask FO to set flaps 15, he says "flaps 15 flaps 2" and he starts set flaps to 15 and after a few seconds back to flaps 2 (before I asked him, I have set flaps 2). He did twice the same thing, so I set flaps 15 myself. Also, when I asked him to set flaps 20 he did strange things with flaps... Finally until touchdown I set flaps manually. Regards, Lucas Lukasz Trzaskowski
April 17, 201610 yr Author Commercial Member Hi Lucas, System Check: Hard to guess. I'm not sure what you've done with your panel.cfg. Flaps: Check the CVR Log in the Config Manager... the system probably also heard you say "Flaps 2". What happened with Flaps 20? B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
April 17, 201610 yr "I'm not sure what you've done with your panel.cfg." ..as I wrote - I paste fresh panel.cfg from backup, then install FSFX Immersion, FS2Crew and ACARS. Confog Manager and System Check reported no errors. After flight - in System Check there is a message "panel.cfg - FAIL", however when I load FSX and NGX, I can open Main Panel normally. "What happened with Flaps 20?" I don't exactly remember :( However there was big problem to properly set the flaps on approach... if I recall correctly even "Flaps 30" command was interpreted as "Flaps 30 flaps 2" Lukasz Trzaskowski
April 17, 201610 yr Author Commercial Member Hi Lucas, Please email me your panel.cfg so I can test it on my system... My email is: admin ****at ******* fs2crew.com For flaps, try again... Check the Voice Log to see what the system heard. Run the voice training again. Cheers, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
April 20, 201610 yr Although I told everyone to wait for the official P3D V3 version Hi, Any ETA for the P3D v3 installer? Thanks I'm French, sorry for my bad english 🙂
April 20, 201610 yr Author Commercial Member Any ETA for the P3D v3 installer? We've had a P3D V3 install option for a long time. When you install FS2Crew Reboot, there's a list of sim platforms you can pick from. Pick the P3D V3 option. Best, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
April 20, 201610 yr ok sorry, i don't understand the post! oups! I'm French, sorry for my bad english 🙂
April 20, 201610 yr Author Commercial Member ok sorry, i don't understand the post! oups! A lot of the posts are old and are not relevant to the latest updates... B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
April 29, 201610 yr Hi Bryan, coming back to "flaps issue" what I described above, yestarday I made second flight with NGX and Reboot 2.0 and issue happened again. CVR log (exctract) [...] Sim Clock (15:53:01) - Captain: flaps one Sim Clock (15:53:37) - Captain: flaps two Sim Clock (15:57:33) - Captain: thanks Sim Clock (15:57:42) - Captain: checked Sim Clock (15:57:43) - Captain: set Sim Clock (15:59:10) - Captain: approach checklist Sim Clock (15:59:11) - Captain: six Sim Clock (15:59:15) - Captain: two nine seven five set Sim Clock (15:59:19) - Captain: set Sim Clock (15:59:21) - Captain: set check six Sim Clock (15:59:48) - Captain: flaps five Sim Clock (16:01:12) - Captain: flaps ten Sim Clock (16:01:51) - Captain: flaps fifteen Sim Clock (16:01:53) - Captain: flaps ten Sim Clock (16:01:57) - Captain: flaps fifteen Sim Clock (16:01:59) - Captain: flaps two Sim Clock (16:04:19) - Captain: gear down [...] Of course I didn't say "flaps ten" after saynig "flaps fifteen" or "flaps two" after saying "flaps fifteen" again... (with previous Reboot version I didn't get similiar issues) Lucas Lukasz Trzaskowski
April 29, 201610 yr Author Commercial Member Of course I didn't say "flaps ten" after saynig "flaps fifteen" or "flaps two" after saying "flaps fifteen" again... The system somehow 'heard' it. You could have coughed, or mumbled something, and the system can interpret that as a command. Run the Voice Training again, and be sure to keep your mic away from your speakers, and try adjusting the mic sensitivity. Best, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
April 30, 201610 yr You could have coughed, or mumbled something ... There is no way... :smile: As I mentioned, this was second time in the same situation (expand flaps)...strange. Anyway, I'll do voice training again. Thanks. Best, Lukasz Trzaskowski
June 11, 20169 yr Is it P3D V3.3 Compatible? Im having problems with starting config manager Raphael Chacón FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481 PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381 #397556
June 11, 20169 yr Author Commercial Member Is it P3D V3.3 Compatible? Im having problems with starting config manager Yes it is. I received your support ticket. Best, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
Archived
This topic is now archived and is closed to further replies.